All Installation Instructions for General Electric Dishwasher 4071100

NONE

UNPACKED WHEELS AND CLIP. USING NEEDLE NOSE PLIERS SQUEEZED WHEEL TIP TO INSERT IN WHEEL. REMOVED OLD WHEELS AND RETAINER BY HAND. INSTALLED NEW WHEELS INSTALLED AND NEW RETAINERS

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Edward from GRAND BLANC, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Jet dry rinse cape destroyed.

Got the part the next day.. opened it and just screwed into place!
Easy as could be. Thank you!!

Parts Used:

Rinse Cap Assembly

Jessie from TYLER, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Rinse aid cap leaking

Opened the door on dishwasher and installed the rinse aid cap. Checked for leaks. None found

Parts Used:

Rinse Cap Assembly

David from BURKBURNETT, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Lost cap to rinse aid disoenser

Just screwed it on.

Parts Used:

Rinse Cap Assembly

MarilynNegri from BLAIRSTOWN, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Old parts showing wear

Watched a YouTube video on disassembly, parts replacement, and reassembly.

Parts Used:

Fine Filter

Fine Filter Hub Nut

Suzanne from CHEYENNE, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.

Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Sheila from DEERFIELD, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Leak under the appliance

After finding the leak source I have targeted the piece part on your web. It came 2 days after and I replaced the defective part by the new one. I switch off the water, untied the nut to release the pipe, take out the part.

Parts Used:

Adaptor Pump Assembly

paul from arlington, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

The soap dispenser would not close.

This was simple. I took the door apart with a portable screw driver. Then I detached the wires and unscrewed the old module and replaced it. I then put the door back together, loaded the dishwasher and it cleaned my dishes. Even for this `old dog' it was easy.

Parts Used:

Detergent Dispenser with Rinse Cap

tim from prior lake, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Leaking from front

I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.

Parts Used:

Tub Gasket

David from North Charleston, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Broken middle spray arm

Unscrewed the screw holding it in place and removed it, out the new one in place and screwed it on. Very quick and simple.

Parts Used:

Middle Spray Arm

Pamela from Bakersfield, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Rollers and axles were worn out

Removed the stops at the end of the upper rack, removed the old rollers. Replaced with new rollers and installed the stops back in place. Very easy, finished in less than 15 minutes. Replacement rollers very much improved with design from the original rollers.

Parts Used:

Dishwasher Dishrack Rollers and Axles

Wayne from PALMER, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Detergent cap would not stay closed

After removing the screws, the front of the dishwasher easily came off. I put 2 screws back in to hold the control panel in place. I did not want that to dangle while replacing the part. The part came off easily after removing the screws. Everything went together easy.

Parts Used:

Detergent Dispenser with Rinse Cap

Michelle from Carlisle, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

dishes where not clean after washing

change the nozzles and filter

Parts Used:

ARM SPRAY UPPER Assembly

Lower Spray Arm - Gray

Middle Spray Arm

Fine Filter

Daniel from Maurice, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

7 of 18 people found this instruction helpful.

Was this instruction helpful to you?

We had a rip in our tub gasket.

I removed the old seal, cleaned behind it, and then put the new seal in. We saw a video on You Tube on how to do it. Partselect also sent instructions on a e mail with the order receipt. We enjoyed working with you guys. Your customer service representative was very nice and accurate in sending out the part. All went as she said it would. Thanks!!

Parts Used:

Tub Gasket