My Orders
405010 General Electric Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old silverware basket wore through and melamine utensils fell through and stuck to heating element which cost me $100 for repairman to remove
3 of 4 people
found this instruction helpful.
-
Diana from NAPLES, FL
- Very Easy
- Less than 15 mins
Put new basket in, threw old one away
Was this helpful?
Thank you for voting!
NONE
3 of 5 people
found this instruction helpful.
-
Edward from GRAND BLANC, MI
- Very Easy
- Less than 15 mins
-
Pliers
UNPACKED WHEELS AND CLIP. USING NEEDLE NOSE PLIERS SQUEEZED WHEEL TIP TO INSERT IN WHEEL. REMOVED OLD WHEELS AND RETAINER BY HAND. INSTALLED NEW WHEELS INSTALLED AND NEW RETAINERS
Was this helpful?
Thank you for voting!
Rollers and axles were worn out
2 of 2 people
found this instruction helpful.
-
Wayne from PALMER, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the stops at the end of the upper rack, removed the old rollers. Replaced with new rollers and installed the stops back in place. Very easy, finished in less than 15 minutes. Replacement rollers very much improved with design from the original rollers.
Was this helpful?
Thank you for voting!
Old parts showing wear
2 of 2 people
found this instruction helpful.
-
Suzanne from CHEYENNE, WY
- Really Easy
- Less than 15 mins
Watched a YouTube video on disassembly, parts replacement, and reassembly.
Other Parts Used:
Was this helpful?
Thank you for voting!
Bottom dishwasher rack rusted out
2 of 2 people
found this instruction helpful.
-
John C from SPRINGFIELD, VA
- Very Easy
- Less than 15 mins
Simple install- just roll it in. Fit perfect. Better design than OEM part. Perfect.
Was this helpful?
Thank you for voting!
pieces that attach the wheels to the lower rack kept falling off
3 of 5 people
found this instruction helpful.
-
Laverne from Roselle, IL
- Really Easy
- Less than 15 mins
Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.
Was this helpful?
Thank you for voting!
Leaked front right side
2 of 2 people
found this instruction helpful.
-
robert from HAYMARKET, VA
- Really Easy
- 15 - 30 mins
-
Pliers
Followed the instructions that came with the my order
Was this helpful?
Thank you for voting!
One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.
3 of 5 people
found this instruction helpful.
-
Sheila from DEERFIELD, IL
- Very Easy
- 15 - 30 mins
Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.
Was this helpful?
Thank you for voting!
leg fell off of bottom rack.
2 of 2 people
found this instruction helpful.
-
Jonni from VACAVILLE, CA
- Very Easy
- Less than 15 mins
Slid it in. Very easy and the replacement part is built better than the original part.
Was this helpful?
Thank you for voting!
Rack was rusted and broken.
2 of 2 people
found this instruction helpful.
-
Amelia from PEORIA, IL
- Very Easy
- Less than 15 mins
It was a very simple replacement. I took the old one out and rolled the new one in. It took less than 5 minutes!
Was this helpful?
Thank you for voting!
Plastic part of inlet valve cracked
3 of 5 people
found this instruction helpful.
-
Barbara from Georgetown, CO
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
Hired my neighbor, who is a plumber.
Was this helpful?
Thank you for voting!
Plastic hinge arm link broke
2 of 2 people
found this instruction helpful.
-
Eric from EAST MEADOW, NY
- Easy
- 15 - 30 mins
-
Pliers
Squeeze the new link to the cable hook with pliers while locking the vise grip to the cable for easier handling. Then, using the vise grip on the cable, hook the other end of the link to the dishwasher door hook
Was this helpful?
Thank you for voting!
The water valve went out
3 of 5 people
found this instruction helpful.
-
Paul from Terra Ceia, FL
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Socket set, Wrench set
I took the old one off and replaced it with the new one, which fir perfectly.
Was this helpful?
Thank you for voting!
The soap dispenser would not close.
2 of 2 people
found this instruction helpful.
-
tim from prior lake, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
This was simple. I took the door apart with a portable screw driver. Then I detached the wires and unscrewed the old module and replaced it. I then put the door back together, loaded the dishwasher and it cleaned my dishes. Even for this `old dog' it was easy.
Was this helpful?
Thank you for voting!
Lower wheels kept falling off
3 of 5 people
found this instruction helpful.
-
helmut from EAST KINGSTON, NH
- Really Easy
- Less than 15 mins
Installed new lower rack wheel kit
Was this helpful?
Thank you for voting!