25360523308 Kenmore Refrigerator - Instructions

All Instructions for the 25360523308
106 - 120 of 341

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No problems
2 of 2 people found this instruction helpful.
  • Karamo from MADISON, WI
  • Really Easy
  • Less than 15 mins
Easy to install. It is self explanatory. You do not even need a manual or video explanation.
Was this helpful?
Thank you for voting!
Both frig Racks I ordered cracked in the middle from use over 15 yrs
2 of 2 people found this instruction helpful.
  • Ray from EAST ROCKAWAY, NY
  • Really Easy
  • Less than 15 mins
took out all items off the shelves from frig - followed the instructions on Steve's video
installed 2 new racks replaced all items on the shelves everything worked fine
Was this helpful?
Thank you for voting!
Upper part of handle broke.
2 of 2 people found this instruction helpful.
  • Merline from NEW WINDSOR, NY
  • Very Difficult
  • More than 2 hours
  • Screw drivers
Lower part of handle didn’t snap in place. Inner white piece I screwed on the door. I thought it would snap in Maybe other part was missing.
Was this helpful?
Thank you for voting!
Refrigerator too warm
2 of 2 people found this instruction helpful.
  • James from N RICHLND HLS, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
The parts were easily replaceable. No special instructions needed. Just identify and remove and replace. I didn't know which specific part needed to be replaced (both reported to fix my problem) but neither part was very expensive so I replaced both. No special tools needed. 1/4" nutdriver and phillips head screwdriver. Repair took ab out 30 minutes. I did have to make an adjustment on the defrost timer (a small dial on the unit) I just set it how the old part was set. I immediately knew it was going to work when I plugged the refrigerator back in and the fan motor inside the freezer kicked on. Easy peesy...
Was this helpful?
Thank you for voting!
BROKEN RIGHT DRAWER RAIL
2 of 2 people found this instruction helpful.
  • Steven from PARRISH, AL
  • Really Easy
  • 30 - 60 mins
REMOVED STUFF FROM SHELVE AND THEN REMOVED SHELVE AND TURN UPSIDE DOWN REMOVED SCREWW AND REPLACED RAIL AND DRAWERIN TRACKS REINSTALLED SCEW AND RETURNEED TO REFRIGERATOR
Was this helpful?
Thank you for voting!
Refrigerator not working, freezer working
2 of 2 people found this instruction helpful.
  • Stephen from VAN WERT, OH
  • Easy
  • 30 - 60 mins
  • Nutdriver
I initially replaced the defrost timer, and later replaced it and the defrost thermostat. The defrost thermostat was the faulty component
Was this helpful?
Thank you for voting!
the freezer frosted up and the fridge was not getting cold.
2 of 2 people found this instruction helpful.
  • Sherry from Newberry, SC
  • Easy
  • 30 - 60 mins
  • Nutdriver
I watched the instructional video and did what it said.
Was this helpful?
Thank you for voting!
Fan was off kilter and began rubbing the frame which is caused it to slow down and make an disturbing audible noise.
2 of 2 people found this instruction helpful.
  • Martin from N HOLLYWOOD, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Before buying the part, I watched your video and realized it was extremely simple to remove and replace. Item was to take 7-10 days and I received it in 4. Took longer than 15 minutes because I had to move the fridge forward, get my tools and a vacuum, get a cup of coffee and get to it. Very easy and the video was exactly step by step. It took longer to vacuum all of the dust bunnies than to replace the part.

Honestly, I was in the market to buy a new refrigerator but now I believe I'll wait several more years. Thank you for your support.
Was this helpful?
Thank you for voting!
Freezer wasn't cooling - compressor not engaging
2 of 2 people found this instruction helpful.
  • Judy from ROYSE CITY, TX
  • Really Easy
  • 30 - 60 mins
Ordered the Capacitor and the Thermostat Control. Parts were received in a matter of a few days, easy to install, but did not fix the problem. Had to call a repairman to fix the problem (compressor relay - this part not available to order for this model number with Parts Select). Will continue to use Parts Select in the future for other p arts, but not happy that the actual part I needed was not available - had to use other methods.
Was this helpful?
Thank you for voting!
Refigerator not cooling
2 of 2 people found this instruction helpful.
  • Carlos from MOSINEE, WI
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I followed your video instructions, is very important to have this information.
Was this helpful?
Thank you for voting!
Refrigerator was to warm, about 50 degrees. Freezer working fine.
2 of 3 people found this instruction helpful.
  • Robert from QUEENSBURY, NY
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
Came across your site and upon checking site out, I ordered the above parts. Repair was easy, thanks to your tutorial. Did not fix problem, so I posed a question to your site and it was recommended I replace the evap fan. I ordered that part. Thank goodness for next day shipping.
That repair was easy as well, thanks to feedback from one of your other customers who had a similar issue. That repair did fix the problem.
Was this helpful?
Thank you for voting!
the refrig was in storage for about a year, the freezer door warped
3 of 6 people found this instruction helpful.
  • Jeffery from Phillipsburg, NJ
  • Really Easy
  • Less than 15 mins
removed freezer door and installed the new one. This was a pretty easy thing to do, although putting the old handle on the new door was a challenge. No knowing that there is a plastic piece holding the top of the handle i broke the that piece and had to order another one. Mean while the freezer was making alot of frost inside, so that had to be cleaned after the new part came.
Was this helpful?
Thank you for voting!
the freezer would stick in defrost and not come out
2 of 3 people found this instruction helpful.
  • carol from woodland, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the vent cover at the bottom. Removed the screws. disconected the harnes and put the new timer in. This was a very easy fix. Thank You!
Was this helpful?
Thank you for voting!
Broken meat pan on Kenmore refrig
2 of 3 people found this instruction helpful.
  • Robert from Los Angeles, CA
  • Really Easy
  • Less than 15 mins
Just slid it in. Fit perfectly. Called the Help Line just to double check that the pan would fit and they assured me it would. Pan cost $20 less than through the Sears site because of lower price, lower shipping and no taxes. Oh, and the pan came in just two days. Very happy.
Was this helpful?
Thank you for voting!
first fresh food too hot, then freezer too hot
2 of 3 people found this instruction helpful.
  • Rita from Lake Luzerne, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Based on the website I decided it was most probably the defrost timer, and that was correct. I ordered it, watched the video, and two days later the part was at my door. Took the nut driver, removed 4 screws, then removed the old defrost timer, installed the new one, re-installed the whole plastic assembly with the four screws, and done !!! Couldn't have been easier.
Was this helpful?
Thank you for voting!
All Instructions for the 25360523308
106 - 120 of 341