- Home
- 25323714101
- Instructions
25323714101 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost original key
1 of 2 people
found this instruction helpful.
-
katrina from EAST ORANGE, NJ
- Very Easy
- Less than 15 mins
Brought replacement key works just like original I thought it would be metal from reviews but it was plastic and still works perfectly
Was this helpful?
Thank you for voting!
Could Not Lock
2 of 6 people
found this instruction helpful.
-
brenda from snellville, GA
- Really Easy
- Less than 15 mins
Oh yea thanx to partselect it went great didnt get fisrtkey but when got the second key it worked great thanx partselect
Was this helpful?
Thank you for voting!
Plastic shelf supports broken
6 of 24 people
found this instruction helpful.
-
shari from west sand lake, NY
- Easy
- 15 - 30 mins
-
Pliers
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm!
Other Parts Used:
Was this helpful?
Thank you for voting!
freezer not maintining adequate temperature
-
Walter from Parlin, NJ
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
replaced controller start capacitor as per troubleshooting checklist. Was not the problem, then replace controller kit. seems to have resolved the problem.Temperature more constant. The problem with this refrig though in my opinion is that only one thermostat controls both the freezer compartment evap fan in freezercompartment also blows
... Read more
cold air into refrigcomp. There is not very much control over both temps. Am in monitoring both compartments and hoping that freezer will keep things frozen
Read less
Was this helpful?
Thank you for voting!
Freezer not freezing
-
Don from Model, CO
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Not sure if it was the Controller or the run capacitor that went bad and took out the controller, so, purchased both an replaced both. Snapped of the wire retainer,unpluged the controller, used pliers and small screw driver to disconnect the controller, plugged wires into the new controller, plug the run capacitor into it ahd reinstalled,
... Read more
so far running great.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
won't start repaced the run capacitor didn't solve the problem so I ordered a defrost timer
-
Curtis from Winlock, WA
- Really Easy
- 15 - 30 mins
I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises
Was this helpful?
Thank you for voting!
not cold enough
-
Gary from Hudson, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section
Was this helpful?
Thank you for voting!
Frige and freezer not cooling
-
FRANK from BRADENTON, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver
I should have ordered start kit instead of start capacitor. The start cap astir did not fix problem so I ordered kit. Compasator comes as part of kit. Followed enclosed instructions. Cut existing wires and reconnected new wiring. Simple as that. It's a plug in item. Now worried it may be working to good. Freezer down to 10 deg. Watching
... Read more
to see if compressor is running to long. Seems ok lol. Wife hates me now. She wanted new frige.
Read less
Was this helpful?
Thank you for voting!
Freezer wasn't keeping things frozen
-
Jim from Newhebron, MS
- Really Easy
- 15 - 30 mins
Plugged in the new parts. No tools were required. Sears wanted to charge me $300 for the repair!
Other Parts Used:
Was this helpful?
Thank you for voting!
stop-basket was broken
-
Kenneth from Tahlequah, OK
- Really Easy
- Less than 15 mins
I stuck the new stop-basket in the hole where it belonged.
Was this helpful?
Thank you for voting!
Needed a freezer key
-
Nancy from Star Lake, NY
- Really Easy
- Less than 15 mins
We really didn t need to do a repair, we just ordered a freezer key that we didn t have. I must say the shipping was fast we received it the next day. It was worth the shipping charge. We will be ordering again. Great service.
Was this helpful?
Thank you for voting!
freezer door got locked and we couldn't find the key
-
Linda from Fresno, CA
- Really Easy
- Less than 15 mins
inserted key and turned
Was this helpful?
Thank you for voting!
freezer would not freeze longer than one day. after ten years without problem
-
ronald from deering, NH
- Really Easy
- Less than 15 mins
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Was this helpful?
Thank you for voting!
Replace the handle mount
-
RUTH from AUSTIN, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.
Was this helpful?
Thank you for voting!
the compressor capacitor overheated
-
Bart from goldsboro, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Was this helpful?
Thank you for voting!