All Installation Instructions for Jenn-Air Cooktop 2320ERS

lost one of the knobs

Ordering and installing was easy. The hardest part was getting the exact match to 20 yr. old appliance knobs. First one I ordered had wrong shaft hole, but it matched perfectly in design. Decided to reorder and just replace all four with matching new-style knobs and the correct shaft hole. Yeah. Looks great and REALLY easy to install.

Parts Used:

Surface Burner Knob

Sabra from Dallas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Burned out burner

Pulled out the old burner and plugged in the new!

Parts Used:

Drip Bowl - Chrome - 8 Inch

Drip Bowl - 6 Inch

Esther from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

old nkobs old and discolored

took old knobs off replaced in 3 minutes

Parts Used:

Surface Burner Knob

WALTER from EL CAJON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

knobs were getting hard to read.

Pulled old knobs off, pressed new ones on. Probably well under a minute for 6 knobs. Anyone with the IQ of a horseradish could have done it. But what was really great was the help and personality of the agent at the other end of the phone. Shipping was as promised, and the entire experience was delightful!

Parts Used:

Surface Burner Knob

Dave from Bloomingburg, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken knob dhaft

Replaced wires from broken to new part.

Parts Used:

Surface Unit Infinite Switch Kit

Richard from THE WOODLANDS, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Old Stove Top

Ordered new cartridges

Parts Used:

Surface Burner Knob

Robert A from Farmington `, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Drip pans were in need of replacement

No brain surgery required. Removed electric burner, put in new drip pans. Voila! Good for many more years of service looking like new.

Parts Used:

Drip Bowl - Chrome - 8 Inch

Drip Bowl - 6 Inch

JOANNE from MONKEY ISLAND, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.

1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover

Parts Used:

Range Grease Filter

Martyn from Middletown, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Drip pans were a mess

Replaced the drip pans

Parts Used:

Drip Bowl - Chrome - 8 Inch

Drip Bowl - 6 Inch

Chhristopher from Houston, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Ring adapter was the original and was pretty well worn through.

Removed the old adapter and replaced it with the bright and shiny new one that fit perfectly.

Parts Used:

Chrome Trim Ring - 8 Inch

Edward from Brooksville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Existing knobs were bent & unreadable

Removed old knobs and installed new. No tools were required.

Parts Used:

Surface Burner Knob

James from Smithfield, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Over the years the numbers has worn off the knobs.

Fed-Ex delivered the package and within 10 min I had open the package, removed the old knobs and installed the new ones, My wife was very impressed with the ease of the transactionl. It is good to know that we can still get parts for our cook top even though it is 26 years old. Thanks for every thing.

Parts Used:

Surface Burner Knob

John from Flippin, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Two burner switches had broken

Turn off elec. power at breaker box. Check twice. Removed burner switch cover. caarefull remove wires from switch, note with color to which terminal remove nut on switch replace new switch replace wires to switch, replace cover turn on power. ready.

Parts Used:

Surface Unit Infinite Switch Kit

John from Seguin, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The switch didn't control the heat range

Took the front panel off by removing 4 screws. Then remove the switch by loosing the nut hold it. Then replace the wire on the new the way they were on the old switch. Put the panel back on.

Parts Used:

Surface Unit Infinite Switch Kit