22314 (1988) Kenmore Range - Instructions

Easy as pie. Just wiped off and plugged in.

Great service. Exact replacement unit. I recommend your company

It took about five minutes to unpack the new burner module and two minutes to install it. I then took five minutes to tell my wife what a genius I was. She told me she always knew I was "handy".

This is very easy The JennAire burner modules slide out very quickly. I was able to do both modules for $360 versus buying a new JennAir stove top for over $1200.

Removed the old unit and replaced it with the new

1 phone call to PartSelect and I found out they warranty their parts for 1 year. They shipped a new one immediately.
Great service!

2 screws to remove
disconnect 220 v power
use long nose pliers to transfer 5 female spade terminals
use nut driver to r@r shaft nut
replace panel with 2 screws
Turn on power and test!---OK!

Called Parts Select - Susan (that talked with me) very helpful - got my purchase shipped that afternoon so I could start to cook again!! Received cartridges two days later! Thanks Parts Select!

Removed old cartridtges and plugged in the new - in time for dinner!

I remove fore screwsfrom the front panel. Then remove two screws to remove the switch and removed the wire plugs then put everything back together again.

just plug in cartridge. Put one in looked so much better got a cartridge for other side. stove top looks new now.

The repair consisted of opening the package and placing the new cartridge into position. Looks good and works like new. Delivery was within two days. Thanks.

The hardest part was making the commitment to sit down at the computer and order the parts! Part Select had the best prices and the best detail/photographs of the coil element cartridges. I felt confident that the parts would fit in my older model cooktop from the information provided. I ordered on Saturday, the parts were delivered by ... Read more noon the next Wednesday. Order confirmation was provided as well as delivery tracking information. The parts were well packaged in a large outer box. The burner cartridges were in two smaller boxes within, securely wrapped in plastic and protected with styrofoam on the ends. I pulled my existing cartridges out of the cooktop outlets, cleaned the cavities below the burners and plugged in the new cartridges. Then, I turned each burner on to make sure they worked. I have been in awe at how easy that was ever since---it looks like a brand new cooktop!!! Everything was brand new and each cartridge came with a Jenn Air use and care manual. I am thrilled!

just pull out moving fromm side to side until unplug from outlet

I removed the element from the box it was shipped
in. I did this very carefully with two hands and then
plugged the new element into the electrical outlet
and turned on the element using all available
heat cycles. It worked perfectly and was exactly
the same color as the older one.

I suggest you use ... Read more two hands in performing this
very delicate manuver.............j

easy...opened box and plugged it in.....