1938 - Instructions

All Instructions for the 1938
106 - 120 of 261

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
We would come home from wintering in Texas and the ice maker would again work for about a week. Decided to replace the valve because it wasn't expensive.
1 person found this instruction helpful.
  • Tom from MINNEAPOLIS, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Wrench (Adjustable)
Replaced the valve and cleaned all the coils at the same time. The ice maker is spewing out ice. Wife is happy again.
Was this helpful?
Thank you for voting!
The rubber around the cap assembly was torn
1 person found this instruction helpful.
  • Steve from TUCSON, AZ
  • Very Easy
  • Less than 15 mins
I pulled the basket out, pulled the cap and connector assembly off with ease, no tools needed, it comes right up, and put the new one on. Put the basket back in and it works great now!
Was this helpful?
Thank you for voting!
all of the old rollers were missing.
1 person found this instruction helpful.
  • Harold from GREENVILLE, MI
  • Easy
  • 15 - 30 mins
the design of the new roller kit was a little different than the original. took a minute to figure the installation. all went well. the new roller assembly fit the 30 year old dish rack
Was this helpful?
Thank you for voting!
Replaced four lower rack on a whirlpool dishwasher.
1 person found this instruction helpful.
  • James from Shreveport, LA
  • Really Easy
  • 15 - 30 mins
I prayed old wheel assembly’s off with the claw end of a claw hammer. Carefully snapped on the new assembly’s which were a little tricky to align. Went well, took about 15 min.
Was this helpful?
Thank you for voting!
Renters removed leveling legs from refrigerator. I don't know why!
2 of 4 people found this instruction helpful.
  • Don from Frankfort, KY
  • Really Easy
  • Less than 15 mins
I tilted the unit back enough to scew the new legs into the threaded holes.
Was this helpful?
Thank you for voting!
Light switch broke
2 of 4 people found this instruction helpful.
  • Carolee from Spokane Valley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this helpful?
Thank you for voting!
broken rollers
1 person found this instruction helpful.
  • Phil from Ft Lauderdale, FL
  • Really Easy
  • Less than 15 mins
simple, simple, simple ! popped off the old ones, snapped on the new ones. Thanks !
Was this helpful?
Thank you for voting!
broken wheel
1 person found this instruction helpful.
  • Dorothy from La Canada, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I snapped the old ones off & snapped on the new ones. It couldn't have been easier!
Was this helpful?
Thank you for voting!
broken wheel on lower rack
1 person found this instruction helpful.
  • Donald from Washington, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
i used a screwdriver to pry off the old wheels then snapped on the new ones.
This was the easiest repair I have ever made on an appliance.
Was this helpful?
Thank you for voting!
Worn wheels on lower rack
1 person found this instruction helpful.
  • James from Jupiter, FL
  • Really Easy
  • Less than 15 mins
Removed old wheels, unclipped. Clipped in new wheels.
Was this helpful?
Thank you for voting!
original dishrack had become rusty
2 of 4 people found this instruction helpful.
  • Tom from Peoria, AZ
  • Really Easy
  • Less than 15 mins
installed a new rack
Was this helpful?
Thank you for voting!
dishwasher bottom basket wheels came off
1 person found this instruction helpful.
  • Jack from Tampa, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
One day after placing my order, replacement wheels arrived. I used a screwdriver to pop each (4 total) old set of tandem wheels off the basket basket and poped each new set on.
Was this helpful?
Thank you for voting!
Light rocker switch broke and refrigerator light couldn't go on.
2 of 4 people found this instruction helpful.
  • Cathy from HOPATCONG, NJ
  • Very Easy
  • Less than 15 mins
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this helpful?
Thank you for voting!
Pantry Drawer Cover keeps falling off, not held in place by End Cap Kit
1 person found this instruction helpful.
  • Gerald from TANEYTOWN, MD
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed the 2 crisper drawers and the glass shelf directly above the Pantry Drawer. Removed the Pantry Drawer and Pantry Drawer cover so you have easy access to the Right-Hand End Cap. On the right-hand End Cap, there are 2 screws which hold the End Cap in place, use a 1/4 inch driver to unscrew the screws from the front of the cabine t on the End Cap and half-way in of the cabinet, leave the screws in their holes in the End Cap. Lift gently to get off a small plastic pin, and move the End Cap away from the Cabinet. You don't need to completely pull the End Cap out of the cabinet, it'll move more like a door opening. Place 2 washers on each screw and gently put the End Cap back into place, being careful NOT to jostle too much so the washers don't fall off the screws. You will need to gently lift the End Cap back in to place over the plastic pin. Hand-tighten the screws back into place with the 1/4 in driver. Remount the Pantry Drawer on the sliders. When you go to install the Pantry Drawer Cover, you will need to gently push on one of the pins to get the cover back into place. Put glass and crisper drawers back into place.

Test by gently pulling on the Pantry Drawer. If properly mounted, the pins will extend fully into the Cover and will keep it secure when opening the Pantry Drawer.
Was this helpful?
Thank you for voting!
Door hinge broke
7 of 19 people found this instruction helpful.
  • David from Vancouver, WA
  • Easy
  • Less than 15 mins
All pieces just snap off and the new one just snap right back in place.

Remeber take a little time to do your repair correctly.

It is cheaper to repair an appliance than it is to replace.
Was this helpful?
Thank you for voting!
All Instructions for the 1938
106 - 120 of 261