1910 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
wouldn't make ice, door seal was hot to touch, warm in fridge.
-
Dale from Sterling, AK
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Socket set
I folded in half twice! and took the back off the fridge(cardboard) and took one brace off and just took the screws off the fan from the other two braces. Turned the fan enough to get at the wires for the fan and cut them off an inch from the old fan, stripped the insulation and wire nutted them to new fan. Make sure they don't interfere
... Read more
with the new fan and put the new fan in place put the screws in and we're making ice and cold fridge again.
Read less
Was this helpful?
Thank you for voting!
Fan motor stopped working
-
john from white pine, TN
- Really Easy
- More than 2 hours
-
Screw drivers, Socket set
Well I could what laid on the floor and replaced it but I didn't I emptied refrigerator laid it over change the motor then stood it back up actual work about three hours
Was this helpful?
Thank you for voting!