1910 - Overview

Models starting with 1910

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Condenser Fan Motor Kit – Part Number: 833697
$115.19
In Stock
Refrigerator Condenser Fan Motor Kit
★★★★★
★★★★★
(20)
Part #833697
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.
Defrost Heater - 500W 115V – Part Number: WP61001846
$53.85
In Stock
Defrost Heater - 500W 115V
★★★★★
★★★★★
(21)
Part #WP61001846
This set includes two nine and a quarter inch radiant glass defrost heaters joined together with wire. Each heater carries 500 watts and 115 volts. The defrost heater heats the evaporator in the defrost mode of operation to keep the cooling coils from frosting over.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Ice Cube Tray – Part Number: WP61002140
$38.95
In Stock
Ice Cube Tray
★★★★★
★★★★★
(3)
Part #WP61002140
This 48 cube ice cube tray is eleven inches long. It is all white in color and it is made entirely of plastic.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
40 WATT REFRIGERATOR BULB – Part Number: W11679940
$11.96
In Stock
40 WATT REFRIGERATOR BULB
★★★★★
★★★★★
(2)
Part #W11679940
Substituted with part number PS869887.
Refrigerator Screw – Part Number: WP489478
$10.41
In Stock
Refrigerator Screw
Part #WP489478
Sold individually.
Refrigerator Defrost Thermostat – Part Number: WP52085-29
No Longer Available
Refrigerator Defrost Thermostat
★★★★★
★★★★★
(1)
Part #WP52085-29
This refrigerator defrost thermostat will cut out at 40 degrees Fahrenheit and kick back when the temperature drops to 25 degrees Fahrenheit.
Kickplate Clip – Part Number: WP60100-1
$11.95
In Stock
Kickplate Clip
Part #WP60100-1
This kickplate clip is an inch long and is made of metal. Two are needed per refrigerator.
Refrigerator Screw – Part Number: WP3-24838-048
$10.59
Special Order
Refrigerator Screw
Part #WP3-24838-048
Sold individually.
Refrigerator 6hour Defrost Timer – Part Number: WP4391974
$177.93
In Stock
Refrigerator 6hour Defrost Timer
★★★★★
★★★★★
(2)
Part #WP4391974
This part may appear different than the original, but will function the same. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
Defrost Evaporator Pan – Part Number: WP68236-1
$149.03
In Stock
Defrost Evaporator Pan
Part #WP68236-1
This defrost evaporator and water collection pan is almost sixteen inches long. It is all black in color and it is made entirely of plastic.

Exact Part matches for your search term

Washer - Spring – Part Number: 1910
No Longer Available
Washer - Spring
This part number matches the current model number 1910
Part #1910
Spring – Part Number: 1910
No Longer Available
Spring
This part number matches the current model number 1910
Part #1910

Common Symptoms of models starting with 1910

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sometimes the condenser fan would start causing the refrigerator to overheat.
189 of 228 people found this instruction helpful.
  • Tom from Franklin, WI
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Was this helpful?
Thank you for voting!
The freezer was cold but refrigerator was warm
83 of 90 people found this instruction helpful.
  • John from Matthews, NC
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers
This is a problem in the defrost cycle. It is one of three items the heater, timer or thermostat.. I removed the screws from the back side of the freezer and romoved the sheet metal from the back which exposes all the elements. Below the evaporaro coils are two small plates which cover the heating elements ( two glass tubes conected to in sulated wire), You may be able to look at it and tell if they are bad. Mine was burnt and obviously gone. If you disconnect from conectors you can check for conitinuity to tell if bad. Simply remove the four screws holding these in place and install new one the same way. quite easy. I did check the thermostat for continuity and relaced it also. It simply plugs into a clip on the back wall and two power connectors. If checking themostat for continuity make sure it is cold otherwise it will be open and you won't get a good read. The timer for this model is under \neather behind the grill on the bottom. simply turn the dial and if the motor stops it is probbably good. It runs 8 hr. and then will shut off for defrost heater to come on. Do this before closing up to tell that your new heater is working. It will get red quickly. Saved a lot of money on this one
Was this helpful?
Thank you for voting!
cocktails running out of ice
56 of 61 people found this instruction helpful.
  • Craig from Westminster, CA
  • Very Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : )
Was this helpful?
Thank you for voting!