13AL Craftsman Lawn Mower - Parts

181 - 192 of 1453

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw (cylinder Head) – Part Number: 84001963
$6.95
Special Order
Screw (cylinder Head)
Part #84001963
This is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is one of the screws for the cylinder head, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Engine Ring Set – Part Number: 594437
$95.95
Special Order
Engine Ring Set
Part #594437
This piston ring set is used to seal the combustion chamber inside a small engine, helping maintain proper compression and control oil consumption. Replacing worn or damaged rings can improve starting, restore power, and reduce excessive smoke. It is commonly used during engine repairs or rebuilds when performance has dropped due to compression loss.
Motor Starter – Part Number: 593934
$234.95
Special Order
Motor Starter
Part #593934
This authentic manufacturer sourced replacement part is designed for use with lawn and garden engines. The starter motor provides an initial motion, engage the flywheel to start the engine. This starter motor features a 14 tooth metal gear. To complete this repair you would need a wrench.
Carburetor – Part Number: 594601
$248.95
Special Order
Carburetor
Part #594601
This genuine replacement carburetor assembly is designed for Briggs and Stratton engines. Carburetor supplies a combustible mixture of gas and air to the engine. It also helps to control its speed. This kit includes a metal body carburetor, a composite material gasket. Difficulty starting, rough idle, high idle, false-start, no-start, excessive fuel consumption: These are the symptoms of a failing carburetor. If these symptoms persist it may be time to replace your carburetor. To complete this repair a screwdriver would be needed. • Remove the air box cover, filter and base • Remove the old carburetor and install the new one • Re-assemble and test the unit
Dipstick – Part Number: 594528
$33.95
Special Order
Dipstick
Part #594528
This is an authentic replacement part manufactured for use with small engines. This metal dipstick features an attached oil fill cap and is used to measure the depth of the oil in the engine. The dipstick is sold individually. No tools are required for installation. Simply press into place.
Carburetor – Part Number: 594593
$248.95
Special Order
Carburetor
Part #594593
This genuine OEM replacement carburetor is designed for use with lawn and garden equipment. It mixes air and gas before the fuel mix goes to the engine. This kit includes a metal body carburetor and gasket If the engine wont start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. To complete this repair you would need a screwdriver. • Remove the air filter cover • Remove the air filter base • Turn off the fuel • Remove the fuel line • Remove the throttle linkage • Remove the carburetor • Replace the throttle linkage • Connect the fuel line to the carburetor • Replace any damaged/old gaskets • Reassemble the carburetor and air filter base • Mount the carburetor and air filter base • Reinstall the air filter • Replace the air filter cover
Crankcase Gasket With Bolts – Part Number: 594195
$65.95
Special Order
Crankcase Gasket With Bolts
Part #594195
This genuine crankcase gasket is used on small lawn and garden engines. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time this gasket will deteriorate and will need to be replaced. It is made out of composite material and it is sold individually. To complete this repair you will need a wrench. Includes one (1) gasket and ten (10) bolts. This will need to be tightened with torque to 300 inch pounds.
Gear-pinion – Part Number: 593935
$46.95
Special Order
Gear-pinion
Part #593935
This is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or faulty pinion gear that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Manifold-intake – Part Number: 592842
$79.95
Special Order
Manifold-intake
Part #592842
This is an OEM part sourced directly from the manufacturer. The intake manifold is commonly found in lawn tractors and engines from Toro and Briggs & Stratton. This part is made of high-quality plastic, and includes two gaskets. It is used to carry clean air from the air filter to the carburetor. You may require a wrench when replacing this part. This is an individually sold item.
Spring-choke return – Part Number: 594864
$16.95
Special Order
Spring-choke return
Part #594864
Armarture-magneto – Part Number: 594626
$90.95
Special Order
Armarture-magneto
Part #594626
This magneto armature ignition coil is designed to generate the high-voltage spark needed for reliable ignition in small single-cylinder engines. By converting low voltage into a consistent spark for the spark plug, it helps resolve issues such as hard starting, misfiring, or no-start conditions. Built for dependable performance and direct replacement, it restores smooth engine operation and reliable starting in lawn mowers and other outdoor power equipment.
Screw (blower Housing) – Part Number: 596718
$6.95
Special Order
Screw (blower Housing)
Part #596718
This is an original replacement part for use with small engines. This screw is flanged at the head, and is used to secure the blower housing. A hex socket wrench is required to install this part, the screw is sold individually.
181 - 192 of 1453