13AL Craftsman Lawn Mower - Parts

121 - 132 of 1453

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Engine Oil Filter – Part Number: 696854
$22.95
In Stock
Engine Oil Filter
Part #696854
This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.
Gear-pinion – Part Number: 695708
$10.95
In Stock
Gear-pinion
Part #695708
This is a manufacturer approved starter pinion gear designed for use with lawn and garden equipment engines. This Starter pinion gear is attach to the starter clutch drive and engages the flywheel to start the engine. It is made out of Plastic and Aluminum and it is Sold Individually.
Terminal-spark Plug – Part Number: 692424
$10.95
Special Order
Terminal-spark Plug
Part #692424
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this terminal is to connect the spark plug to the lead wire. It is an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.
Gasket-float Bowl – Part Number: 698781
$17.95
Special Order
Gasket-float Bowl
Part #698781
This is a genuine manufacturer sourced replacement part designed for lawn and garden equipment engines. This gasket provides an air-tight seal for the float bowl. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of rubber material and it is sold individually. Replacing this item you would need a screwdriver.
Float-carburetor – Part Number: 694914
$46.95
Special Order
Float-carburetor
Part #694914
This is an authentic replacement part manufactured for use with lawnmower engines. The carburetor float is used to open and close the float needle valve. This carburetor float allows fuel into the carburetor when it is drained and shuts off the fuel when the carburetor bowl is full. This carburetor float is sold as an individual replacement part.
Hex Screw – Part Number: 692125
$7.95
Special Order
Hex Screw
Part #692125
A loose or missing sump screw may allow the crankcase cover to move or leak oil. This replacement fastener has 1/4-20 UNC threads, a 2-inch length, and a hex head. It fits select engines used on lawn mowers, tractors, and pressure washers. Use the exact engine model, type, and code numbers to guarantee the proper fit. Drain the engine oil if the sump cover must be removed. Install the screw in the location shown in the parts diagram, then tighten it in the proper order and to the torque listed in the service manual.
Engine Governor Link Spring – Part Number: 691842
$20.95
Special Order
Engine Governor Link Spring
Part #691842
A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is an identical replacement for a damaged or missing governor link spring which was originally installed on a new unit, make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Plug – Part Number: 794903
$9.95
Special Order
Plug
Part #794903
Screw – Part Number: 691693
$6.95
Special Order
Screw
Part #691693
Washer – Part Number: 691261
$6.95
Special Order
Washer
Part #691261
This washer is a genuine OEM Briggs & Stratton replacement used in small gasoline engines to provide secure fastening, proper spacing, or load distribution between engine components. Made to original factory specifications, it helps maintain correct assembly and reliable operation and is an ideal replacement when a worn, missing, or damaged washer causes looseness, vibration, or improper component fit.
Ring-retaining – Part Number: 691265
$10.95
Special Order
Ring-retaining
Part #691265
The retaining ring fits next to the pinion gear and helps to hold it in place. Keep in mind that this part is made of metal and is sold individually. It is a genuine item that is supplied by the original equipment manufacturer for use with Briggs & Stratton engines and Toro lawn tractors. During installation, a socket set and a screwdriver may be required to help replace this part.
Plug-oil Drain – Part Number: 691680
$10.95
Special Order
Plug-oil Drain
Part #691680
This is an authentic OEM component from Briggs & Stratton. The oil drain plug is made for use with many small engines. The metal plug is often fastened into the crankcase cover, and is removed to drain the oil as needed. A hex key or Allen wrench is necessary for the removal and replacement. The oil drain plug is sold individually.
121 - 132 of 1453