1255 - Instructions

All Instructions for the 1255
106 - 109 of 109

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer quit running when lid was closed
  • Colleen from Indianapolis, IN
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Socket set
This repair took me longer because I was just giving it a try - I have no experience, although I tend to be "handy." I'm sure anyone with experience would rate this as "easy" and have taken only a short time. I had to watch the video several times to understand what to do - and the comments were helpful too. My washer is an OLD maytag, so I removed the front of the dash and pulled it forward to access the electronics. My switch had only 2 prongs, so I hooked up to the "lid closed" option on the new switch. It works perfectly now. Very pleased I gave it a try.
Was this helpful?
Thank you for voting!
Switch broken
  • Willie from Virginia Beach, VA
  • Difficult
  • 1- 2 hours
  • Screw drivers, Socket set
I was impressed with the fast time the part was delivered. The price was good too. The installation video and instructions did not match my dryer but it was helpful to some extent. The video and instructions being different was not ya'll's fault because of the age of the dryer. It took me so long to change the switch was because of the lo cation and design of the switch. I got it though.
Was this helpful?
Thank you for voting!
over fill water
  • ronnie from meriden, CT
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench set
replace the water valve
Was this helpful?
Thank you for voting!
broken
  • Tomas from Orlando, FL, FL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Removed the old one installed the new one
Was this helpful?
Thank you for voting!
All Instructions for the 1255
106 - 109 of 109