1199028 Kenmore - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
heating elements not working
1 of 7 people
found this instruction helpful.
-
christopher from cincinnati, OH
- Easy
- Less than 15 mins
-
Pliers
prepared the parts as directions displayed, removed the heating coils and popped the hood on the range, simple curcit 2 wires in to the main harness for each coil. snip, plug and twist add heat wrap to seal the new conections and done very simple fix saved me buying another oven....for now
Was this helpful?
Thank you for voting!
Control will not work - only clock blinks
0 of 4 people
found this instruction helpful.
-
Sue from Lampasas, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Top element not heating
-
Mary from Montgomery, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Ordered wrong part at first caused me to blow out two elements. With the help of PartSelect I was able to get the right surface block terminal and replaced both of them, then found out I had a bad switch, they got the switch within 2 days I had my stove working good again. Thanks to PartSelect. Also watched the video which was very helpf
... Read more
ul ML
Read less
Was this helpful?
Thank you for voting!
Left hinge broke in pieces
-
Marilyn from Yonkers, NY
- Really Easy
- 15 - 30 mins
-
Wrench (Adjustable)
First I read other comments here; then checked youtube.com to see if there was a video - there was! Easily removed the stove door and the storage drawer to access the spring. Removed the spring and used screwdriver to remove 2 of 3 screws - third had a nut on back which required removal of the decorative panel next to the door. After appl
... Read more
ying Liquid Wrench, was able to use vise-grip to remove last bolt. Inserted new hinge, attached the spring to hinge and stove frame then inserted the 3 screws. Reattached the decorative panel and was done. Repklaced a hinge, not a stove!!!
Read less
Was this helpful?
Thank you for voting!
Three terminal blocks burned out (disintegrated) on electric stove
-
Valentina from Riverside, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!!
... Read more
I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!
Read less
Was this helpful?
Thank you for voting!
stove burner no longer would heat up burner element
-
Bonnie from Price, UT
- Easy
- 15 - 30 mins
-
Screw drivers
I removed the burner element, then the drip pan. I took off the old block. Then I had to strip the old wires. Then I put on the heat sleeve, then attached the new wires to the old wires with nuts. Put heat sleeve over this and heated with lighter. Then put everything back together.
Was this helpful?
Thank you for voting!
Burners did not get hot or went on and off
-
Boyd from kalamazoo, MI
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
After carefully inspecting existing burner receptacles, I unscrewed them, raised and propped stove top. Determined which bracket to use from new kit and proceeded to cut and strip wires, twist ends together with supplied ceramic caps and heated shrink wrap on that junction. Works great. BTW got parts in 2 days in great shape and good dir
... Read more
ections.
Read less
Was this helpful?
Thank you for voting!
Replace terminal block and burner unit.
-
James from Williamsville, VT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very simply following the online video instructions.
Was this helpful?
Thank you for voting!
two of the burners were working intermittently
-
Kevin from Desoto, MO
- Really Easy
- 15 - 30 mins
-
Screw drivers
I shut off the breaker checked for power then cut old plugs making sure to allow a little slack. Tightened down wire nuts put on a couple wraps of electrical tape and that was it. Burners work great now I would reccomend this product to anyone with a similar problem.
Was this helpful?
Thank you for voting!
Plug block was broken
-
Mark from Hillsboro, OR
- Easy
- 15 - 30 mins
-
Screw drivers
I removed the entire burner assembly to avoid having to turn things off at the breaker - the whole assembly can be removed completely from the stove I had. Once it was out and disassembled, the toughest part was putting the new wires into the new block correctly. Once that was done, I had to select the right mounting bracket - there were
... Read more
2 in the kit. Easy, just attention to detail. The rest of the instructions were easy to follow, re-doing the wires. The re-assembly was trivial, and it worked first time!
Read less
Was this helpful?
Thank you for voting!
Burner was slow heating at times. Moved back burner to front still same thing.
-
Gail M from Lockport, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed screw holding bracket. Used side cutters to cut wires. Replaced the bracket, put the shrink wrap on wires, twisted wires together and held with wire caps. Shrunk the wrap with lighter. I'm a 67 year old female.. No problems.
Was this helpful?
Thank you for voting!
drip bowl purchased at local store was wrong size
-
james from lockport, NY
- Really Easy
- Less than 15 mins
purchased correct part from PartSelect and it fit like a glove!
Was this helpful?
Thank you for voting!
burner burnt
-
Carol from Valley Cottage, NY
- Really Easy
- Less than 15 mins
It was just replacing the element no tools were required.
Was this helpful?
Thank you for voting!
The burner coil had been broken
-
elizabeth from Pasadena, MD
- Really Easy
- Less than 15 mins
Just plugged it in! The hardest part was finding the model number. It was inside the top of the stove,while cleaning, I found it-on the left hand side when you take out the burner pans. I searched this site, found the part and when it arrived I just plugged it in and it worked fine. I would say less than 5 minutes to fix this issue.
Was this helpful?
Thank you for voting!
burner not working
-
gene from kent, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
burner was shorting out replaced part works great
Was this helpful?
Thank you for voting!