110C8 Kenmore - Parts

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

Sold individually.

This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.

This seal is for the top of basket drive tube shaft.

Metallic screw that is less than an inch long. Does not include the plastic washer.

This drum assembly is designed for appliances that use a direct-drive motor system, eliminating the need for belts or gearboxes. By connecting the drum directly to the motor, this configuration enhances energy efficiency and reduces operational noise. The assembly provides stable rotation for effective washing or drying performance, depen...Read moreding on the appliance type. It is a genuine OEM component, ensuring compatibility and durability. Please note that the cardboard packaging or insert is not included with this part. Always disconnect power before installation and consult your appliance’s manual for proper handling and fit.

This part is what tells the dryer to stop running when the door is open.

Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 145 degrees Fahrenheit and a differential of 20 degrees. Meaning that with this thermostat, the heating element will cut out at 145 degrees and cycle back on once the internal temperature drops by 20 degrees.

This part is used to activate the lid switch when the lid opens/closes.

This hose can handle hot or cold water and is five feet long.

This part prevents the agitator shaft from leaking oil onto the transmission.

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.