Models > 1108875279A > Instructions

1108875279A Kenmore Washer Dryer Combo - Instructions

All Instructions for the 1108875279A
121 - 133 of 133
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower Agitator was moving but the top half was not much movement
I took the top of the Agitator off and then, used a socket set to take the Agitator off and then removed the retaining cap nd removed the dog ears that were broken and placed the new onews in, and then reinstalled the agitator then started up the washer it worked fine. I then started to wash a load of dirty clothes. Another fine job well done. Thank you for having the parts here real quick
Parts Used:
Agitator Cam Kit
  • Scott D. from Mingo Jct., OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
latch broke
Replace with new latch.
Parts Used:
Door Catch Kit
  • Jack from Kirkland, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The door was not catching. The female part to the door closing mechanism broke. It was such an easy fix! Took about 30 secs to fix!!
Pulled out the broken part than easily snapped the new part into place..
Parts Used:
Door Catch Kit
  • Gary from Milford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer door would not stay closed
I did a quick research online and found PartSelect to have the best price. I ordered my part on Monday 8/6 and to my tremendous surprise FedEx delivered it Tuesday 8/7!! I did not pay for overnight delivery. My son happened to come by that day and he took a small flathead screwdriver, pried the old one out and inserted the new part. Done in 5 minutes! PartSelect will be my supplier from now on.
Parts Used:
Door Catch Kit
  • Ruth B from Hempstead, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lint Filter and Cover was bent
Replaced it
Parts Used:
Dryer Lint Filter and Cover Dryer Lint Filter and Cover
  • MVasquez from Coral Gables, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Male end of door catch broke
First, I replaced the male end which was just two screws and simple replacement of pushing the fastener into the door frame. When finished I noticed the female end was damaged as well. Glad the female part came as well. This required taken off the front trim around the door (four screws - 2 each side) and then the door. The installing of the female end was easy with a little push. The damaged female end was already hanging out so easy to grab and remove. Otherwise I would have had to remove the front panel. Note You need to put the door trim back on before reattaching the door.
Parts Used:
Door Catch Kit
  • George from Hamden, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Latch was broken so door wouldn't close
This was real easy just slid the latch in front panel and attached to latch assembly to the door. The repair was about 45 seconds.
Parts Used:
Door Catch Kit
  • Doug from Kearney, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lid Safety Switch Falure
Found the assembly manual page for that model on your site, disassembled the washer top, replaced the bad switch, re-assembled, tested the washer [worked perfectly], and I was done. Couldn't have gone any smoother or quicker if I had planned it. This is the second repair that I have used PartSelect. Their parts are competitively priced and I am still amazed at the shipping transit time. I paced the order on Monday nite at 9PM PST, and I have it Wednesday AM, so 1 day, coast to coast. Keep up the great work, PartSelect !!!!
Parts Used:
Lid Switch Kit
  • Linda M from Crestline, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
the plastic latch broke
im a car mecanic it was easy
Parts Used:
Door Catch Kit
  • greg from phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Washer leaking
After watching some on-line vids, I determined it was the center post, or tub, gasket at the bottom. A cheap part, and easy to snap-out the old and snap-in the new - But - I had to dissassemble the washer into individual washer component molecules. Luckily, I'd done this recently to replace the clutch drive, then the motor, then this. Not too bad, really. Washer body off (2 screws and two snap-links); agitator out (7/16" socket on extension); bang off tub nut (heavy hammer and punch); bang off drive block (hammer again); and pull tub up an out. Tub drain disconnected (pliers); pull off level sensing tube; three spring mounts (nutdriver); then just yank tub up. Poke out Centerpost gasket; snap in a new one; reassemble. Piece of cake.
Parts Used:
Centerpost Gasket
  • Forrest from Oxford, AL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Washer filled with water but would not start agitating
Removed the transition panel in the front. Removed the washer's rear cover bolts and slid washer cover forward enough to be able to lift it a bit. Disconnected the wires. Removed wiring clips, unscrewed switch from cover. Replaced lid switch and reassembled.
Parts Used:
Lid Switch Kit
  • Thomas from Lake Mary, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Worn Out Broken Door Latch
I would like to say first of all that I was amaized and pleased at how simple the ordering of this part was and while looking at the parts diagram on you website I noticed the door swing was optional and could be easily changed and the dryer came from the factory with a latch installed on both sides of the door. In our laundry room the dryer sits to the left of the washer and the door to the dryer opened to the right which has always been a slight inconvenience. . . So instead of changing out the broken part, I took the door and hinge off with my cordless screwdriver (6-8 screws) and turned it around and remounted it on the opposite side. . . Simple! I never took the new part out of the ups envelope. Now I have a spare so I taped the new part in the envelope to the back of the dryer in case I ever need it and now we have more convenience with the door swinging the correct way. Sweet deal! Took less than an hour. Thank you for making this task simple. Chuck g.
Parts Used:
Door Catch Kit
  • chuck from odessa, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replace a seal
Just had to remove cap on agitator and replace new rubber seal.
Parts Used:
Seal, Inner Cap
  • Janet from Colfax, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 1108875279A
121 - 133 of 133
Back to Top