110773 Kenmore - Instructions

All Instructions for the 110773
121 - 135 of 2350

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
dryer not working
22 of 33 people found this instruction helpful.
  • Maura from Newtown, CT
  • Really Easy
  • Less than 15 mins
After unplugging and removing the back cover from the dryer, locate the push button switch. Slide putty knife around outer cover to unhook catch. Replace with new push button switch. My dryer is still not working, but this was a simple replacement.
Was this helpful?
Thank you for voting!
Broken push to stat switch
18 of 21 people found this instruction helpful.
  • Charles from Fairfax, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed back cover, removed broken switch, replaced with new switch, replaced back cover, told wife her dryer was fixed.
Was this helpful?
Thank you for voting!
dryer sounded like I was strangling a dog
18 of 21 people found this instruction helpful.
  • Lynda from Syracuse, NY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
First, I watched a utube video of replacing the dryer belt. Then I went to Sears Hardware and couldn't find a part. Then I ordered the parts for my favorite online repair parts source - partselect.com. I had the part in one day! We did exactly what the video showed and also replaced the two wheels that looked like roller blade wheels. Pie ce of cake. Saved a $75 repair call plus whatever the parts would have been and spent about 20 minutes doing it. Back in business. Great for a 12 year old dryer! Buy the dryer kit!
Was this helpful?
Thank you for voting!
Squeaky Dryer
17 of 19 people found this instruction helpful.
  • Daniel from Hamilton, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
I looked for squeaky dryer within parts select and went with the 80%. I received the Maintenance Kit, replaced two rollers and it works like new. Amazing since this is the first time I have ever opened a dryer. The instruction sheet and parts were all I needed.
Was this helpful?
Thank you for voting!
Upper nozzle "spinner" had degraded to the point where it no longer worked
17 of 20 people found this instruction helpful.
  • Brian from Socorro, NM
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers
The only difficult part was taking out (relatively easy) and returning (hard) the clips from the rails. This required bending the end of the metal rails with pliers. Otherwise the dishrack just rolled in with no issues.

The spinner is somewhat lower than the one it is replacing, making the clearance over items in the lower rack to be serviceable but marginal.
Was this helpful?
Thank you for voting!
Dishwasher wouldn't clean - arms not spraying
17 of 20 people found this instruction helpful.
  • Aivars from Round Lake Beach, IL
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Water was not being sprayed thru the arms. I opened the dishwasher, removed/unscrewed the spray arms and wash impeller (black plastic wheel that directs the water) and then noticed that the part below the wash impeller had broken into pieces. There was only a metal ring and it was supposed to have a spring attached to it. I replaced the r ing/spring below the wash impeller using the part from the Drain and Wash impeller kit. The dishwasher works great now.

It was my first mechanical fix. Use the web to diagnose, find the specs of the appliance and use common sense and you can do it yourself too.

By the way, the parts from this site arrived the next day.
Was this helpful?
Thank you for voting!
Loudly clunking clothes drum due to worn out roller
17 of 20 people found this instruction helpful.
  • KENNETH from WEST ORANGE, NJ
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set
Followed video on Parts Select site for comparable model showing roller and drive belt replacement.

The triangle plastic retaining clips were the most difficult part , to put
on and take off. They required careful , firm stretching with needle nose pliers.
Was this helpful?
Thank you for voting!
Rear Drum Seal started to come apart
16 of 18 people found this instruction helpful.
  • Brett from CRESCENT CITY, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Used the YouTube video sent by this site
Was this helpful?
Thank you for voting!
detergent door latch did not work
17 of 22 people found this instruction helpful.
  • Judy from ESTES PARK, CO
  • Really Easy
  • Less than 15 mins
I removed all the ( what my Husband called star screws ) star screws and removed the housing panel ( holds dish detergent cup and silverware basket ) I discovered everything accross the bottom was all gucked up with detergent soap accumulation. I took the part to the kitchen sink and used the sprayer hose on the part with hot water and i t cleaned up beautifully, and the detergent latch then worked ( the spring that operates the latch was all gucked up with detergent accumulation ).
I am the wife and did all of this myself and it only took around 5-10 min. My Husband had to help me figure out the type of screws because they turned out to not be phillip screws, but as Hubby called them.."star screws".
Soooo, I did not need to use the Latch Kit I purchased, so will store it in my parts supply! :)
Happy repairs to you..
Judy Estes Park, CO
Was this helpful?
Thank you for voting!
Lint screen torn
15 of 16 people found this instruction helpful.
  • James from Glenside, PA
  • Really Easy
  • Less than 15 mins
Lint screen on my 30-year dryer was torn. Ordered the new screen here with just the part number, fits well. Very helpful website.
Was this helpful?
Thank you for voting!
upper spray and middle spray arms had broken apart due to age leaving unusable.
21 of 35 people found this instruction helpful.
  • Thomas from Murfreesboro, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The video offered was perfect and walked me through the exact process and gave me the confidence i could handle this repair myself. It was very intuitive and went step by step. Thank you for taking the time to post the repair steps on video. Ordering the parts was very simple and they arrived on time. Flawless in every aspect. i would recommend your company.
Was this helpful?
Thank you for voting!
Door catch on dryer door broke
14 of 14 people found this instruction helpful.
  • Lynne from Jamestown, CA
  • Really Easy
  • Less than 15 mins
PartSelect sent me three different door catches with instructions for choosing the correct one. I did choose and simply inserted it into the slot and voile! All finished and it works great now! PartSelect had the part delivered the day after my order was placed. I would suggest doing business with them to anyone asking who they might c ontact for a part. I especially appreciated the ease of identifying and ordering from them. I was able to do all of this on-line via their website.
Was this helpful?
Thank you for voting!
Change dryer belt
15 of 17 people found this instruction helpful.
  • Scott from Bayport, NY
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I opened up the dryer as per the instructions I had received from PartSelect tech support. It was very easy to do. The only unexpected thing was that the original belt had snapped and in doing so the idler pulley was actually laying on the floor of the dryer's bottom. I had to figure out how it went, but that only took a minute and I p opped it back into place. I held the drum by hand while pulling the dryer face away so it wouldn't fall and then I slipped the belt over the drum and quickly closed the front up again. I aligned the belt on the spot where the old one had been, pulled it through the idler pulley and over the motor and voila. Done. I closed up the dryer and was on to another "Honey Do" project within 20 minutes.
Was this helpful?
Thank you for voting!
Valve was leaking from plastic after water line change
18 of 27 people found this instruction helpful.
  • Nathaniel from Chelsea, MA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Socket set
Turned of water and unplugged the dishwasher.
Disconnected the incoming water line.
Drained on to the floor (have paper towels ready)
Disconnected the electrical feed wire.
Disconnected the rubber hose.
Unscrewed screw holding the fixture to the frame.
Took off the brass elbow from the old part.
Put pipe dope around it and screwed into new part (carefully, so as to not crack plastic again).
Attached part back to frame.
Attached water lines.
Turned on water, plugged it in and ran dishwasher looking for leaks. No problem.
Was this helpful?
Thank you for voting!
Loud banging noise when running dryer
15 of 18 people found this instruction helpful.
  • Joseph from Prospect Park, PA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Found one of the two drum support rollers was badly worn. Found Partselect.com, found my parts in less then 2 mins. Figured that I was in there so I should just replace the belt so I got one of those also. Parts arrived in 3 days dryer as good as new in 20 mins.
Was this helpful?
Thank you for voting!
All Instructions for the 110773
121 - 135 of 2350