1106909 Kenmore Washer Dryer Combo - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
dryer door wouldnt latch shut
0 of 2 people
found this instruction helpful.
-
Phyllis from Riva, MD
- Really Easy
- Less than 15 mins
-
Wrench set
ordered new latch kit and repaired, very easy thank you
Was this helpful?
Thank you for voting!
The dryer would not run.
0 of 2 people
found this instruction helpful.
-
Kevin from North Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in
... Read more
a few days. Problem solved. Thank you
Read less
Was this helpful?
Thank you for voting!
Dryer would not start
0 of 2 people
found this instruction helpful.
-
Edwin from Shelby, NC
- Easy
- Less than 15 mins
-
Screw drivers
Took top of d then dryer loose then replaced switch actuator put dryer top back in place. Not that hard.
Was this helpful?
Thank you for voting!
Old Part Broke Off
0 of 2 people
found this instruction helpful.
-
Steve from Edina, MN
- Really Easy
- Less than 15 mins
Took 5 seconds, just snapped in the slot, didn't need any tools.
Was this helpful?
Thank you for voting!
door latch/ catch completely shattered
0 of 3 people
found this instruction helpful.
-
Edward from Lowell, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Snapped latch into existing hole in 2 seconds. The pin that goes into latch was still intact. That's it ,real simple. The only problem I will hopefully not have in the future is the the mico-switch which is just hanging in there, the switch works but the lever that extends out from the face, that works with the door is partially broken of
... Read more
f and the switch is no longer available on your parts list. The appliance is twenty-one years old. I am very happy with your service and I received the parts the next day, after I ordered them and I will be buying more parts in the months to come. This time it will be for my Kenmore gas stove and then a Kenmore refrigerator door hinge.
Read less
Was this helpful?
Thank you for voting!
Dryer would not start
-
John from Sackets Harbor, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
I noticed that the dryer door switch actuator spring/lever was broken on the door. I researched how to get the top of the dryer cover off, and I took apart the mechanism. I called a local repair shop and they wanted me to buy the whole unit instead of just the switch lever. So I did some research to find the part on the web, and I came a
... Read more
cross your site. It was very easy to navigate, and I fould the part easily. I saved about 66% by just ordering the lever and not the whole unit. I would without hesitation, buy parts from your website again. The part was shipped and received very quickly. Thanks again!
Read less
Was this helpful?
Thank you for voting!
Door latch broke
-
Leandra from Miami, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Exactlyt how your video showed me. I was a bit skeptical, but it was the easiest repair ever.Thank you
Was this helpful?
Thank you for voting!
The catch on the dryer door had to be replaced
-
Vincent A. from Gibsonia, PA
- Really Easy
- Less than 15 mins
-
Pliers
Six(6) screws were removed to separate the front and rear sections of the dryer door to get access to the rear of the catch.Pliers were used to maneuver the catch through the opening in the cabinet from the rear. The new catch was easily snapped into the catch opening from the front of the door.
Was this helpful?
Thank you for voting!
Door latch broken
-
Janet from Manlius, NY
- Really Easy
- Less than 15 mins
For 2 years, I propped a broom stick against my dryer door to keep it shut while it was running. Last Sunday night, I decided that it was about time to fix it. I found the PartSelect site, which was extremely easy to navigate, and ordered a replacement kit. It arrived in 2 days via Fed Ex and actually contained extras of each of the 2
... Read more
components, in slightly different sizes. It took me about 10 minutes of eyeballing the parts to figure out how to place them and about 30 seconds to install the new latch parts. They fit perfectly. Great site, great service, I would highly recommend this site.
Read less
Was this helpful?
Thank you for voting!
door catch broke off
-
barbara from san diego, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
just the way the video showd me
Was this helpful?
Thank you for voting!
door would not activate dryer......lever broke!
-
nancy from troy, MT
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I am one Happy Gal.....Looked to fix,thought about just buying a new dryer..In the end talked to the local repair guy...said I could do it myself. (why pay him)..I live in small town.Ordered your part,watched the video and did it...Saved myself over $500, plus the $125 for delivery.for that new dryer..(Small town in the forest!)Very easy
... Read more
to install....Hope to use this dryer for many months perhaps years..It is 30 years old! Works like a champ! Thank You!
Read less
Was this helpful?
Thank you for voting!
The small end of the actuator switch that the door pushes against was broken off.
-
Joyce from Highland Springs, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
I'm a 66 year old lady with no repair experience at all!! I found the part I needed on Parts Select, which I ordered and received in less than 4 days. I watched the video that you've posted on your website which shows in great detail how to do this repair. It looked like a simple fix and it was!! I highly reccomend Parts Select!! Took
... Read more
my granddaughter(held flashlight) and myself less than 30 minutes to do the repair!!!
Read less
Was this helpful?
Thank you for voting!
Door Switch Actuator Spring/Lever & Door Catch Replacement
-
Charles from Marysvile, WA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Open the top and replaced the switch bracket with the actuator lever then inserted new door catch.
Other Parts Used:
Was this helpful?
Thank you for voting!
actuator spring lever broke
-
george from port angeles, WA
- Easy
- 15 - 30 mins
-
Screw drivers
two screws on filter housing and then lift dryer to up like the hood of a car the two screws on actuator, be careful not to drop actuator, if you do use a magnet to retrieve, two screws back in then wire clip top of dryer down and two screws back into filter housing and your ready to dry clothes, not recommended but if you have to dry clo
... Read more
thes while waiting for part a clamp on the switch will allow you to use dryer, but be extremely careful because dryer will not turn off when door is opened
Read less
Was this helpful?
Thank you for voting!
Dryer won't start
-
Michael from Cincinnati, OH
- Easy
- 15 - 30 mins
-
Screw drivers
Located broken front door safety switch actuator. Ordered new part shown on the diagram. Removed broken part, installed new part, start dryer,runs fine.
Was this helpful?
Thank you for voting!