1106617821 Kenmore Dryer - Instructions

All Instructions for the 1106617821
121 - 135 of 309

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The latch on my dryer door wasn't working. I was having to shove a towel in the door to get it to stay shut until I was able to repair it.
1 of 2 people found this instruction helpful.
  • Dan from Lockport, LA
  • Really Easy
  • Less than 15 mins
All I had to do was get the model number off of the dryer and plug that information in online and within a couple of days the part arrived. It was great! There were directions that came with the part that explained how to replace the old latch with the new one.

I remember in the "olden days" when I would of had to call a repai r guy out and paid a lot more than the $12.00 I did to replace the part myself. And, the only reason it was $12.00 dollars instead of $5-6 was because I had it shipped overnight.

Awesome!
Was this helpful?
Thank you for voting!
Dryer door kept opening
1 of 2 people found this instruction helpful.
  • Jennifer from Big Timber, MT
  • Easy
  • Less than 15 mins
  • Screw drivers
Popped out the old door catch kit and replaced it with the new one! Easy!!
Was this helpful?
Thank you for voting!
Dryer door wouldn't shut
1 of 2 people found this instruction helpful.
  • Amy from Cumberland, RI
  • Really Easy
  • Less than 15 mins
The door catch kit is soo easy. They give you instructions on which one to use depending on your dryer and it fit perfectly into the door. This was great especially since it was so inexpensive! My husband thought we would have to replace the door.
Was this helpful?
Thank you for voting!
The male part of the door catch was broken
1 of 2 people found this instruction helpful.
  • David from Chhicago, IL
  • Really Easy
  • Less than 15 mins
Simply installed the piece and I was done. Took 10 seconds.
Was this helpful?
Thank you for voting!
Door latch snapped off.
1 of 2 people found this instruction helpful.
  • Karen from Randle, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
We got the part so fast we were both surprised. My husband installed the part by just seeing how the old one came off. It was simple and fairly quick. Except that his hands are so big they had a hard time fitting in to where the part needed to go. Just opened the top of the dryer, took the old part out and put the new one in.
Was this helpful?
Thank you for voting!
Broken door actuator spring -interposer for motor control
1 of 2 people found this instruction helpful.
  • Stephen from Vancouver, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Followed previous comments and took 5 minutes to replace. Be careful to hold spring and switch together because easy to separate and drop. Two screws to remove for switch, two to remove for lint trap, pop the lid up and switch / spring is easy to access.
Was this helpful?
Thank you for voting!
Dryer Door Wouldn't Shut
1 of 2 people found this instruction helpful.
  • Megan from Kettering, OH
  • Really Easy
  • Less than 15 mins
My husband is the one who fixed the door. He said he just popped it into place and was done in just a couple of seconds! The best part though was the quick service we received. . . I ordered the part around 10:30 in the morning, and it was at my front door by 5pm the next day!!! What great service!!!! We will definitely do business a gain with partselect. Com if we ever need more parts.
Was this helpful?
Thank you for voting!
Door wouldn't fasten shut
1 of 2 people found this instruction helpful.
  • Susan from Laingsburg, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Popped the latch out and popped a new one in.

The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se rvice. You made my life easier.
Was this helpful?
Thank you for voting!
Received part in 3 days from ordering. I was surprised when it showed up at my front door so quickly. Less than 1/2 hour later we were drying laundry again. Very impressed with the speed of service and the price.
2 of 5 people found this instruction helpful.
  • Patrick from Ramsey, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First removed 2 screws on lint remover vent. Used a screw driver to force up top of dryer from out front. These will require pressure to pop the top off the dryer. Once the top was up I could reach the actuator and remove the 2 screws holding it. Once removed just replaced with new actuator and bam, done. Snapped top of dryer back on a nd reinstalled 2 screws on lint vent and Done. Easy, no problem....Thank you PartSelect!!.
Was this helpful?
Thank you for voting!
old tube burned out
2 of 5 people found this instruction helpful.
  • JERRY from SPANISH FORK, UT
  • Really Easy
  • Less than 15 mins
removed the shield and removed the old tube. Replaced with the new tube and replaced the shield. The only place I could locate this tube was through the internet. This Co. had as good a price including shipping that I found.
Was this helpful?
Thank you for voting!
Replace motor in dryer
1 of 2 people found this instruction helpful.
  • Clyde from Salisbury, MD
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Repair went well your video was a great help. The motor was hard to disconnect from the blower and fan side.The shaft that you hold with the adjustable plier was hard plastic type of material and wanted to keep slipping and the edges wanted to round off and not hold in the adjustable pliers. I had to use a small pipe wrench with teeth to break it loose. The only other problem was the ground screw in the new motor had an odd type of head on it and took a special type of nutdriver attachment to loosen it and attach the ground wire to the new motor.
Was this helpful?
Thank you for voting!
Dryer was shutting down,in 5 minutes, either heat or no heat.
2 of 5 people found this instruction helpful.
  • Calvin from Downs, KS
  • A Bit Difficult
  • 30 - 60 mins
  • Wrench set
Pulled back panel off, then removed entire front body. Accessed the blower and the lint cover and removed. Removed drum and belt. Removed motor and replaced, reassembled and plugged in and it worked. Thank you
Was this helpful?
Thank you for voting!
Door keeps opening while operating
1 of 2 people found this instruction helpful.
  • Carmine from MASSAPEQUA PK, NY
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old catch and strike with screwdriver and needle nose pliers. Installed new parts. My old catch did not have comparible numbers so I just used the yellow one. Worked fine.
Was this helpful?
Thank you for voting!
dryer latch engagem ent
1 of 2 people found this instruction helpful.
  • Earl from Terre Haute, IN
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
our son was able to diagnosis and order the part and very pleased with quite response. Dryer now working fine.
Was this helpful?
Thank you for voting!
Noisy
1 of 2 people found this instruction helpful.
  • Kevin from PT PLEAS BCH, NJ
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
Lifted top of dryer using putty knife. Took front panel off using socket wrench. Slipped drum belt off an took drum out. Vacuumed out entire interior. Replaced rollers an clips and reassembled!! Saved $100!!! Thank you!!
Was this helpful?
Thank you for voting!
All Instructions for the 1106617821
121 - 135 of 309