- Home
- 1106205802
- Instructions
1106205802 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
The switch in the door of the dryer was broken so it would keep running when you opened the door
0 of 1 people
found this instruction helpful.
-
Matt from Stilwell, KS
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I losened the two screws under the flap covering the filter or lint screen. With the screws removed the entire top of the dryer slides forward and hinges up allowing access to the door switch. The door switch is removed by taking two screws out with access obtained by opening the dryer door. Replacing the bracket/switch was easy and a
... Read more
simple reverse of the disassembly put the dryer back together. I would highly recommend doing this repair yourself.
Read less
Was this helpful?
Thank you for voting!
Dryer stopped working
0 of 1 people
found this instruction helpful.
-
Mike from Conway, AR
- Really Easy
- Less than 15 mins
-
Screw drivers
The Door Swith Acuator Spring was broken. I unplugged the dryer. Removed the two screws on the top control panel. Lifted the top of the dryer and propped it up. Then removed the two wires attached to the door switch (remember to label them with tape-one without and one with tape). Then as suggested by a previous "repairman" loosen th
... Read more
e two screws that hold the switch just enough to remove the actuator. You do not have to completely remove the screws. Slip in the new actuator and reverse the process. Voila ... you have a new dryer and a very happy better half. I was given a kitchen pass to play golf and savor some "spirit" water.
Advice: Don't slam the dryer door. The actuator will last longer.
Advice: Don't slam the dryer door. The actuator will last longer.
Read less
Was this helpful?
Thank you for voting!
Couldnt get the dryer to turn on even when i had power.
0 of 1 people
found this instruction helpful.
-
Kevin from Tonica, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy to repair remove top of dryer and took out to screws and put switch back in place replaced screws and put top back on. Easy!!
Was this helpful?
Thank you for voting!
the door switch broke, and I had to pop the lid unscrew the switch and use a clothespin to depress the switch acuator button....not pretty.
0 of 1 people
found this instruction helpful.
-
Greg from Phoenixville, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
same as I described above. However i was amazed when the part showed up the very next day...I was expecting maybe 3 or so days later. I wiil absolutely use PartSelect in the future.
Was this helpful?
Thank you for voting!
Wife pulled bed sheets out of drier and broke door switch actuator
0 of 1 people
found this instruction helpful.
-
Ernest from Moundsville, WV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Loosened two screws in back top of drier and pulled forward and up to hinge top of drier and allow access to door switch.Took out broken actuator spring and replaced with new one,snapped lid back in place and put screws back in hinges and job was done.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
Dryer would not start
0 of 2 people
found this instruction helpful.
-
Edwin from Shelby, NC
- Easy
- Less than 15 mins
-
Screw drivers
Took top of d then dryer loose then replaced switch actuator put dryer top back in place. Not that hard.
Was this helpful?
Thank you for voting!
The dryer would not run.
0 of 2 people
found this instruction helpful.
-
Kevin from North Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in
... Read more
a few days. Problem solved. Thank you
Read less
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people
found this instruction helpful.
-
Judith from Phoenix, AZ
- Really Easy
- Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
actuator spring lever broke
-
george from port angeles, WA
- Easy
- 15 - 30 mins
-
Screw drivers
two screws on filter housing and then lift dryer to up like the hood of a car the two screws on actuator, be careful not to drop actuator, if you do use a magnet to retrieve, two screws back in then wire clip top of dryer down and two screws back into filter housing and your ready to dry clothes, not recommended but if you have to dry clo
... Read more
thes while waiting for part a clamp on the switch will allow you to use dryer, but be extremely careful because dryer will not turn off when door is opened
Read less
Was this helpful?
Thank you for voting!
The small end of the actuator switch that the door pushes against was broken off.
-
Joyce from Highland Springs, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
I'm a 66 year old lady with no repair experience at all!! I found the part I needed on Parts Select, which I ordered and received in less than 4 days. I watched the video that you've posted on your website which shows in great detail how to do this repair. It looked like a simple fix and it was!! I highly reccomend Parts Select!! Took
... Read more
my granddaughter(held flashlight) and myself less than 30 minutes to do the repair!!!
Read less
Was this helpful?
Thank you for voting!
Dryer won't start
-
Michael from Cincinnati, OH
- Easy
- 15 - 30 mins
-
Screw drivers
Located broken front door safety switch actuator. Ordered new part shown on the diagram. Removed broken part, installed new part, start dryer,runs fine.
Was this helpful?
Thank you for voting!
Dryer door switch broken or burned out
-
James from Iota, LA
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
My wife did the repair. Went on your website and watch the video on how to replace the switch and she was able to do it herself. I didn't mind at all. Saved $75.00 service charge.
Was this helpful?
Thank you for voting!
dryer would not run
-
Jeffery from Cordova, AL
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
removed 4 screws. 2 in the back and 2 at the lint screen door. Remove top lid of dryer and looked down and there was the door switch with the broken actuator spring. A diagram of the dryer with part locations is very helpful. I checked the switch with volt meter to make sure it was ok. It was ok! Replace the actuator and put every thing b
... Read more
ack together and dryer works just fine. Thanks to PartSelect I was able to buy the actuator spring buy itself and not have to buy the switch also.
Read less
Was this helpful?
Thank you for voting!