1106012511 Kenmore Dryer - Instructions

All Instructions for the 1106012511
1 - 15 of 41

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
35 of 37 people found this instruction helpful.
  • Richard from Fairfax, VA
  • Really Easy
  • Less than 15 mins
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
Was this helpful?
Thank you for voting!
old lint screen -torn at wire mesh
27 of 28 people found this instruction helpful.
  • Chris from Morgan City, LA
  • Really Easy
  • Less than 15 mins
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
Was this helpful?
Thank you for voting!
The old lint screen on the dryer was broken
24 of 30 people found this instruction helpful.
  • Bill from Farmington Hills, MI
  • Really Easy
  • Less than 15 mins
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
Was this helpful?
Thank you for voting!
part number was different from the original, but it fit just fine.
20 of 30 people found this instruction helpful.
  • John from Bristol, CT
  • Easy
  • Less than 15 mins
installed the new dryer lint screen, it fit perfectly
and is now in operation.
Was this helpful?
Thank you for voting!
replace lint filter
10 of 11 people found this instruction helpful.
  • Ed from Greensboro, NC
  • Really Easy
  • Less than 15 mins
with both hands
Was this helpful?
Thank you for voting!
The main knob insert snapped.
11 of 16 people found this instruction helpful.
  • Larry from HICKORY, NC
  • Very Easy
  • Less than 15 mins
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place.

Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicat es the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
Was this helpful?
Thank you for voting!
Old screen failed ripped needed replaced.
8 of 10 people found this instruction helpful.
  • Michael from Kingman, AZ
  • Really Easy
  • Less than 15 mins
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
Was this helpful?
Thank you for voting!
handle broke on filter
7 of 8 people found this instruction helpful.
  • Connie from Gaithersburg, MD
  • Really Easy
  • Less than 15 mins
just slide the new filter in.
Was this helpful?
Thank you for voting!
Thought it wad the start switch $23.00
6 of 8 people found this instruction helpful.
  • Diane from HGHTN LK HTS, MI
  • Very Easy
  • Less than 15 mins
  • Pliers
Paid an extra over night fee Friday $24.00 didn't get it until Tuesday afternoon all in all it cost $51.00 then that wasn't the problem.
Was this helpful?
Thank you for voting!
broken handle
4 of 5 people found this instruction helpful.
  • John from New Bedford, MA
  • Really Easy
  • Less than 15 mins
1) removed the old broken filter
2) deposited it in nearby wastebasket (with lint attached)
3) used scissors (see above) to remove plastic cover from new lint filter
4) inserted new lint filter
5) marveled at my handiwork!
Was this helpful?
Thank you for voting!
Lint Filter wore out had to be replace
4 of 5 people found this instruction helpful.
  • Don from Dayton, TX
  • Really Easy
  • Less than 15 mins
Changed out the lint filter
Was this helpful?
Thank you for voting!
Lint Filter wore out.
4 of 6 people found this instruction helpful.
  • Claude from Austin, TX
  • Really Easy
  • Less than 15 mins
It required no tools, just take out the old torn filter and slip in the new one. I should have ordered it a year ago, with the ease of the website and the delivery via Fed Ex. super easy.
Was this helpful?
Thank you for voting!
Needed a new lint filter
3 of 3 people found this instruction helpful.
  • Evelyn from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
Took the old one out, replaced it with new one.
Was this helpful?
Thank you for voting!
Lint would no go throw
2 of 2 people found this instruction helpful.
  • Jean M from CHESAPEAKE, VA
  • Really Easy
  • Less than 15 mins
Received the new lint removal from the box and install it easily
Was this helpful?
Thank you for voting!
Lint filter cracked
2 of 2 people found this instruction helpful.
  • Cynthia from POLAND, ME
  • Very Easy
  • Less than 15 mins
Removed old filter, replaced with new.
Was this helpful?
Thank you for voting!
All Instructions for the 1106012511
1 - 15 of 41