- Home
- 1106008713
- Instructions
1106008713 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The dryer door kept popping open while in use.
0 of 1 people
found this instruction helpful.
-
Joseph from Margate, FL
- Easy
- 15 - 30 mins
I googled the problem, then came across a site where somebody had experienced the same problem, and they changed the door catches to resolve it. I did a search for Whirlpool parts and found "partselect.com". I followed the instructions on the website and located the parts very easily and also discovered that there was a video on how to ma
... Read more
ke this repair. We were tolerating this problem for quite some time and now the problem is resolved, thank you...
Read less
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people
found this instruction helpful.
-
Shirley from Las Vegas, NV
- Really Easy
- Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people
found this instruction helpful.
-
peggy ann from forest city, NC
- Really Easy
- Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Door would not latch
0 of 1 people
found this instruction helpful.
-
Richard from Millinocket, ME
- Really Easy
- Less than 15 mins
-
Pliers
I pulled the old latch out of the catch and installed a new one. It just popped into place. The job could not have been easier.
Was this helpful?
Thank you for voting!
Couldnt get the dryer to turn on even when i had power.
0 of 1 people
found this instruction helpful.
-
Kevin from Tonica, IL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy to repair remove top of dryer and took out to screws and put switch back in place replaced screws and put top back on. Easy!!
Was this helpful?
Thank you for voting!
Wife pulled bed sheets out of drier and broke door switch actuator
0 of 1 people
found this instruction helpful.
-
Ernest from Moundsville, WV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Loosened two screws in back top of drier and pulled forward and up to hinge top of drier and allow access to door switch.Took out broken actuator spring and replaced with new one,snapped lid back in place and put screws back in hinges and job was done.
Was this helpful?
Thank you for voting!
replace the latch
0 of 1 people
found this instruction helpful.
-
Dennis from Perkasie, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
take the old latch out and pop the new one in. Your repair kit worked perfect.
Was this helpful?
Thank you for voting!
Dryer door would not close
0 of 1 people
found this instruction helpful.
-
Felipe from Helotes, TX
- Really Easy
- Less than 15 mins
Super easy repair. Funny to think I almost called to have it serviced before I found the Door Catch Kit. The original catch had actually fell into the door so when I got the new part it simply snapped in no tools needed!
Was this helpful?
Thank you for voting!
Door latch broken
0 of 1 people
found this instruction helpful.
-
P from Melbourne Beach, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Repair was straight forward with only two screws to undo. Popped the two sides in and I was done. What was amazing was the lowest cost on parts and the timely delivery.
Was this helpful?
Thank you for voting!
My dryer door would not stay shut.
0 of 1 people
found this instruction helpful.
-
Michelle from Colby, KS
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the old door catch by using a screwdriver to pry it out, then I popped the new door catch in its place and it snapped right in. It took less than 5 minutes to do the whole job.
Was this helpful?
Thank you for voting!
the door switch broke, and I had to pop the lid unscrew the switch and use a clothespin to depress the switch acuator button....not pretty.
0 of 1 people
found this instruction helpful.
-
Greg from Phoenixville, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
same as I described above. However i was amazed when the part showed up the very next day...I was expecting maybe 3 or so days later. I wiil absolutely use PartSelect in the future.
Was this helpful?
Thank you for voting!
Plastic door latch was cracked.
0 of 1 people
found this instruction helpful.
-
David from Kohler, WI
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I removed the plastic latch using a screw driver to pry it out. I had to use pliers to completely remove it. Then I snapped the new piece in. It worked perfectly the first time. Very easy repair.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
Dryer would not come on
0 of 1 people
found this instruction helpful.
-
Steven from Bassett, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Replaced the cap over the door switch so when the door closed the switch was engaged
Was this helpful?
Thank you for voting!