110280 Kenmore Washer - Overview

Models starting with 110280

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Drain Pump – Part Number: W10536347
$154.38
In Stock
Drain Pump
★★★★★
★★★★★
(31)
Part #W10536347
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
Drive Hub Kit – Part Number: W10528947
$39.32
In Stock
Drive Hub Kit
★★★★★
★★★★★
(38)
Part #W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a simple DIY repair with easy-to-follow instructions and usually includes everything you need to get your washer working again.
Basket Hub Kit – Part Number: W10820039
$52.45
In Stock
Basket Hub Kit
★★★★★
★★★★★
(31)
Part #W10820039
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
Lid Latch Assembly – Part Number: W10404050
$86.45
In Stock
Lid Latch Assembly
★★★★★
★★★★★
(32)
Part #W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
Washing Machine Suspension Rod Kit – Part Number: W10780048
$87.93
In Stock
Washing Machine Suspension Rod Kit
★★★★★
★★★★★
(60)
Part #W10780048
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.
Washer Drive Pulley – Part Number: W10721967
$53.48
In Stock
Washer Drive Pulley
★★★★★
★★★★★
(20)
Part #W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the basket. The kit includes everything you need—clutch parts, pulley, gear, and more—but make sure it fits your model before ordering. It’s a simple repair that can get your washer back to working like new.
Tub Centering Spring - 2 Pack – Part Number: W10400895
$18.44
In Stock
Tub Centering Spring - 2 Pack
★★★★★
★★★★★
(9)
Part #W10400895
Tub centering springs. Comes (2) per package. Helps keep tub balanced and centered with the main top.
Washer Drive Belt – Part Number: WPW10006384
$40.34
In Stock
Washer Drive Belt
★★★★★
★★★★★
(13)
Part #WPW10006384
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly. It fits many Whirlpool, Maytag, and Kenmore models, but be sure to check your model number before ordering. A broken belt can also cause a burning smell, so replacing it can get your washer back in shape and running smoothly.
Washer Shift Actuator 120v 60hz – Part Number: WPW10006355
$80.52
In Stock
Washer Shift Actuator 120v 60hz
★★★★★
★★★★★
(26)
Part #WPW10006355
If your washer won’t start, spin, or agitate, this shift actuator might be the fix. It helps switch between wash and spin cycles and controls the agitator’s movement. It fits many Whirlpool, Maytag, and Kenmore models. Easy to install with basic tools—just unplug the washer and turn off the water first. Sold individually.
Washer Inner Cap Seal – Part Number: WPW10072840
$15.41
In Stock
Washer Inner Cap Seal
★★★★★
★★★★★
(2)
Part #WPW10072840
Also known as an O-Ring. This black o-ring seal is three inches in diameter.
Washer Agitator Cap Barrier w/Seal – Part Number: WPW10074580
$22.63
In Stock
Washer Agitator Cap Barrier w/Seal
★★★★★
★★★★★
(6)
Part #WPW10074580
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Common Symptoms of models starting with 110280

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid Lock light blinking, machine will not start
325 of 405 people found this instruction helpful.
  • David from Los Alamos, NM
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer faile d which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
Was this helpful?
Thank you for voting!
Loose change entered drain pump, cracked housing leaked all water out
205 of 243 people found this instruction helpful.
  • ROBERT from BARRINGTON, IL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
Disconnect power, hot/cold supply and drain hose. Tip washer onto front side, expect some additional water to leak out. Remove the cracked drain pump, 3 screws, hose clamps, and electrical plug.

Tip washer back up, use the putty knife to pop the top cover up (clips are about 6.5in in from sides). Unclip the white plastic cover over the outer and inner tubs. Pop the center cap from inside the inner tub, exposing the bolt holding the inner tub down. Remove bolt, pull inner tub up and out.

At bottom of outer tub remove 2 screws from drain access cover, should find some change under there (or in the pump).

Re-assemble using new pump.

Note:
Before new pump arrived I was able to use some silicone sealant, epoxy, and black tape to temporarily fix the cracked pump housing after pulling it out.
Was this helpful?
Thank you for voting!
Violent shacking in spin mode.
189 of 230 people found this instruction helpful.
  • Terry from Homosassa, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Watched a video on the internet.
Was this helpful?
Thank you for voting!