- Home
- 11021392011
- Instructions
11021392011 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
machine wobbled violently
2 of 2 people
found this instruction helpful.
-
John from TEXAS CITY, TX
- Really Easy
- 30 - 60 mins
followed video instruction that came with part. Previously watched youtube video (there are several, the low production videos are well worth viewing over the professional types). It was a breeze, other than the videos saying one person could do all four. When you get to the last rod, it is more difficult to lift the tub to insert the
... Read more
final rod in the round holder. I asked my wife for assistance.
Read less
Was this helpful?
Thank you for voting!
Not really a problem but the hardest part was moving the washer to lay on its back.
2 of 2 people
found this instruction helpful.
-
John from WHITEWATER, CA
- Really Easy
- 1- 2 hours
-
Nutdriver, Pliers, Socket set, Wrench (Adjustable)
I simply followed Steve's instructions on video. Very easy repair. Washer works great, no jumping or vibrating.
Was this helpful?
Thank you for voting!
washer shake hole machine from begin spin about 11/2 ' h
3 of 6 people
found this instruction helpful.
-
Dieu from Houston, TX
- A Bit Difficult
- 30 - 60 mins
chage out part and washer still shake
Was this helpful?
Thank you for voting!
Rinse cycle kept repeating, did not spin clothes
2 of 3 people
found this instruction helpful.
-
Shane from CLINTON TWP, MI
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Socket set
Spin indicator light was illuminated but machine was repeating rinse cycle rather than spinning water out of clothes. Replaced the pulley and drive coupler, thinking there was a mechanical problem. Video instructions were great but old pulley and drive coupler looked perfect so replacing them did nothing. Next I replaced the washer actu
... Read more
ator (shifter), thinking that was the reason for no high speed spin. Easy job, as shown in the video, but it also did nothing. The problem turned out to be a failure in the control panel, probably resulting from years of vibration. Decided to stop chasing my tail and bought a new washer.
Read less
Was this helpful?
Thank you for voting!
agitator broke
2 of 3 people
found this instruction helpful.
-
Joseph from Kalkaska, MI
- Really Easy
- Less than 15 mins
-
Socket set
very easy to repair , instructions very clear , parts person very good to talk to, parts got here fast
Was this helpful?
Thank you for voting!
Banging when in spin cycle.
1 person
found this instruction helpful.
-
ROBERT from OXLY, MO
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I FOLLOWED THE INSTRUCTIONS IN THE VIDEO AND HAD NO PROBLEMS. It was very easy.
Was this helpful?
Thank you for voting!
Washer drum banging on spin cycle
1 person
found this instruction helpful.
-
David from KISSIMMEE, FL
- Really Easy
- 15 - 30 mins
Very simple repair with the kit. Old rods came out easily using vise grips locked on to rods about 10-12 inches down and pulling up. Had doubts if they were bad since everything looked good but drum bounced back several times when I shoved it down to test it earlier. New rods went in just as easy and replaced in less than 30 min. Hardest
... Read more
part was that I had very cramped laundry room so had to move and disconnect hoses etc. to move into larger space for repair and then move back to reconnect. Parts came quickly within about 3 days and now purrs like a kitten!
Read less
Was this helpful?
Thank you for voting!
Extreme imbalance
1 person
found this instruction helpful.
-
Jerry from OROVILLE, WA
- Really Easy
- 30 - 60 mins
-
Pliers
This washer would not go into spin cycle without going out of balance no matter how we arranged the contents in the drum. We were looking to buy a front loader when I happened open this company with video instructions and positive comments from other people with the same issue. For the cost it was worth a try. Following the video and in l
... Read more
ess than one hour the washer was back in service. It now operates like the day we installed it new. Highly recommend this fix which should save you hundreds on a new washer.
Read less
Was this helpful?
Thank you for voting!
Door alignment
2 of 4 people
found this instruction helpful.
-
Amy from INMAN, SC
- Really Easy
- 30 - 60 mins
I was sent the wrong part , when I questioned them said they did not have it so was directed to Whirlpool and they are making it and I might get it in May
Was this helpful?
Thank you for voting!
Springs worn out on the suspension rods. (Noisy drum in spin cycles)
1 person
found this instruction helpful.
-
Douglas from BEECH ISLAND, SC
- Easy
- 30 - 60 mins
-
Nutdriver
The video posted on this site will walk you right through the repair. Great service. Thanks!
Was this helpful?
Thank you for voting!
Washer shaking and banging loudly during spin cycle
1 person
found this instruction helpful.
-
Dan from KISSIMMEE, FL
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Replaced the suspension rods
Was this helpful?
Thank you for voting!
Machine making loud noise
1 person
found this instruction helpful.
-
jEFF from Carlisle, PA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench set
Replaced pulley and plastic gears and belt. Belt was riding off fully cutting through cover.
Other Parts Used:
Was this helpful?
Thank you for voting!
The washer was shaking during the spin cycle
1 person
found this instruction helpful.
-
Michele from ROCHESTER, NY
- Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Exactly like the video from the website
Was this helpful?
Thank you for voting!
Shakes and moves | Noisy
1 person
found this instruction helpful.
-
Philip from BURIEN, WA
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers
Followed video on your web site, and used that for ways to fix, good directions. If I was more organized it prob would of taken about an hour or less
Was this helpful?
Thank you for voting!
The spin cycle was very noisy & shook the whole machine.
1 person
found this instruction helpful.
-
Ace from VENICE, FL
- Very Difficult
- More than 2 hours
The part we needed wasn’t pictured — nor the quantity identified. There are 4 absorbers required for full replacement. I received one absorber — 3 1/2 inches X 1 1/2 inch wide X 1/8 inch thick. Including shipping, the cost was $53.00!! Outrageous! A 10 foot roll of the same thing can be bought online for less than $20.00.
... Read more >By the way, it didn’t solve the problem.
Paul
... Read more >By the way, it didn’t solve the problem.
Paul
Read less
Was this helpful?
Thank you for voting!