1069658180 Kenmore Refrigerator - Instructions

All Instructions for the 1069658180
121 - 135 of 247

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
cracked crisper drawer
1 of 2 people found this instruction helpful.
  • JOELLE from NAZARETH, PA
  • Really Easy
  • Less than 15 mins
Easy ordering and installation.
Thanks.
Was this helpful?
Thank you for voting!
The track that held up the drawers broke
1 of 2 people found this instruction helpful.
  • Harriet from Minnetonka, MN
  • Easy
  • Less than 15 mins
I removed the food off the glass shelf. I removed the drawer and lifted out the frame that holds the glass shelf. I removed the glass and the broker track and put in the new track. I put the glass back in then put it into the refrigerator.
Was this helpful?
Thank you for voting!
Ice maker not working
1 of 2 people found this instruction helpful.
  • Doug from Dublin, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Basicly i bought this kit because I didnt know what part I needed. Our refer already had a icemaker. I pluged in the new ice maker and screwed it into the freezer in the exsisting holes. Presto a full box of ice in 48 hours.
Was this helpful?
Thank you for voting!
My husband pulled the pan-crisper too hard and it cracked.
1 of 2 people found this instruction helpful.
  • linda from Havertown, PA
  • Really Easy
  • Less than 15 mins
Replaced the part and put it in the refrigerator
Was this helpful?
Thank you for voting!
2 broken crisper drawers
1 of 2 people found this instruction helpful.
  • Susan from Nags Head, NC
  • Really Easy
  • Less than 15 mins
We went online, found the part, and had it delivered to our rental house in Nags Head, NC. It was the easiest thing ever.

Thank you
Was this helpful?
Thank you for voting!
Big handed grandson handled to rough
1 of 2 people found this instruction helpful.
  • Donna from GLENDALE, AZ
  • Very Easy
  • Less than 15 mins
Took everything out of the old one, lined the new one with cloth and put everything back in.
Was this helpful?
Thank you for voting!
light did not work on the refrigerator side
1 of 2 people found this instruction helpful.
  • David from GROVESPRING, MO
  • Easy
  • Less than 15 mins
bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what i s inside the refer!
Was this helpful?
Thank you for voting!
Rocker on switch broke off
1 of 2 people found this instruction helpful.
  • David Barnes from ROSWELL, NM
  • Very Easy
  • Less than 15 mins
Eased the putty knife under the edge of the switch housing and pried it off. Pulled two wires off the old terminals and hooked them onto the new one and reinstalled into the refrigerator body.
Was this helpful?
Thank you for voting!
Light switch broke off
1 of 2 people found this instruction helpful.
  • Kathy from TEMECULA, CA
  • Very Easy
  • Less than 15 mins
  • Pliers
We looked up the problem online with the model number of the refrigerator. We ordered the part and followed the video installation that was sent with the order and was found online prior to purchasing
Was this helpful?
Thank you for voting!
There was a crack in the Humidity Crisper drawer
1 of 2 people found this instruction helpful.
  • Mary from FRIDAY HARBOR, WA
  • Really Easy
  • Less than 15 mins
I looked it up on the site per Refrigerator Model #. I wanted a confirmation from an expert at this site that I was ordering the right drawer. The part # the expert gave me was different than what I was going to order per my Model #. I'm really glad I waited for the expert reply and ordered that drawer. This is for a rental property, an d we are a few hours away from the property. It was less than a minute to pull out the old crisper drawer and slide in the new. Thank You!!!!!
Was this helpful?
Thank you for voting!
Doesn’t cool
1 of 3 people found this instruction helpful.
  • Benjamin from WASCO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Work just perfect
Was this helpful?
Thank you for voting!
I found that frost was accumilating in the freezer
1 of 3 people found this instruction helpful.
  • Teddy from Fruitland Park, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Ordered a defrost timer kit and a Bimetal defrost thermostat clip. I matched the wires but first I unplugged the frig.I cut the two wires on the Bimetal defrost and added the two connectors. All's well that ends well.Problem solved.
Was this helpful?
Thank you for voting!
A door handle mount broke on the freezer door.
1 of 3 people found this instruction helpful.
  • Dominic from Walton, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The repair was easy. The amazing story was that I ordered the part around 12:00 noon on Friday December 21st and it arrived by USPS mail the next day Saturday December 22, right in the heat of the Christmas rush.
Was this helpful?
Thank you for voting!
Coating on ice maker coming off in ice.
1 of 3 people found this instruction helpful.
  • Kelly from Taylorsville, UT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench set
Because of the age of the unit, I replaced all but the wire harness. It was easy to repalce.
Was this helpful?
Thank you for voting!
light staying on
0 of 1 people found this instruction helpful.
  • Cecelia from Beaver Dam, WI
  • Easy
  • 15 - 30 mins
  • Screw drivers
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Was this helpful?
Thank you for voting!
All Instructions for the 1069658180
121 - 135 of 247