- Home
- 1069658180
- Instructions
1069658180 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The refridgerator will not run
2 of 3 people
found this instruction helpful.
-
Victor from Colton, CA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
After the front panel was removed, disconnected the timer and installed new in reverse order. The provided instructions could be more straight forward, I spent more time reading it than the installation itself.
Was this helpful?
Thank you for voting!
Refrigerator was freezing up and not cooling fresh food compartment
2 of 3 people
found this instruction helpful.
-
Greg from McLoud, OK
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
The repair was easy, I removed the cover on the top front of the fresh food compartment. It housed the defrost timer which was easy to identify and replace. Just removed a screw, unplugged the wires and replaced with the new part. Unfortunately, that wasn't the only problem. I also had to replace the defrost element that the timer sen
... Read more
t power to. While I was at it, I replaced the defroster thermostat. The entire repair took under an hour, diagnosing the problem took the most time and effort.
Read less
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people
found this instruction helpful.
-
Gail from Golden, CO
- Really Easy
- Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
latch end of track broke when too full jammed drawer was forced
2 of 3 people
found this instruction helpful.
-
H. James from Bella Vista, AR
- Easy
- Less than 15 mins
PartsSelect diagrams at their website made it easy to find and order the right part at a reasonable price. I removed the lower glass shelf and frame that supports it. I removed broken track and slipped in the new track and snapped it in place with the orifice at the rear of the track over small peg in the back of the frame. If I had call
... Read more
ed a regular refrigerator repair man, i'll bet this job would have cost me at least 70 or 80 dollars,
Read less
Was this helpful?
Thank you for voting!
Drawer cracked/split
4 of 9 people
found this instruction helpful.
-
Yvonne from Fredericksburg, VA
- Really Easy
- Less than 15 mins
I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)
Was this helpful?
Thank you for voting!
Original drawer handle had cracked and the crack spread down to the body of the crisper unit.
2 of 3 people
found this instruction helpful.
-
Scott from JAY, VT
- Very Easy
- Less than 15 mins
Took out the old, cracked, crisper unit and removed the white trim piece on the handle so that we could re-use it on the new crisper unit (which, in spite of the $90+ price tag did not come with new trim). The whole thing took 3 minutes to do.
Was this helpful?
Thank you for voting!
replaced cracked compartment door
2 of 3 people
found this instruction helpful.
-
john from NORWOOD, MA
- Really Easy
- Less than 15 mins
removed old and installed new compartment door by hand.
Was this helpful?
Thank you for voting!
Crisper Drawers were cracked
2 of 3 people
found this instruction helpful.
-
Luke from CENTER, TX
- Really Easy
- 15 - 30 mins
I replaced the cracked crisper drawers with the new ones just by sliding them in the bottom of the refrigerator. This did not solve the problem because one of the drawers was smaller than the other one and left a big space. When I ordered the Crisper Drawers I looked at the part diagram and it looked to me that the drawers were two differ
... Read more
ent sizes and thats what I ordered. I now need to order another large drawer to finish the repair.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer no longer frost free.
1 person
found this instruction helpful.
-
anthony from NORCROSS, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Reviewed Youtube video as a reference. Unplugged refrigerator. Removed old defrost timer. Matched the color of the wiring harness to the diagram that came with the part. Attach new part to wiring harness.
Was this helpful?
Thank you for voting!
Warm refrigerater
1 person
found this instruction helpful.
-
charles from REDDING, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Followed instructions from ideoo
Was this helpful?
Thank you for voting!
door hinge broke.
2 of 4 people
found this instruction helpful.
-
Bernard from DONALDSONVLLE, LA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed door and replaced bushing bracket was ok.
Was this helpful?
Thank you for voting!
Original door gasket split from age, no longer sealing snugly to refrig.
1 person
found this instruction helpful.
-
William from LYNBROOK, NY
- Easy
- 15 - 30 mins
Inserted scraper behind gasket breaking it free from door, permitting a hand hold. While putting tension on gasket, slid scraper around door gently removing old gasket. Replaced gasket starting at top gradually working around door. No need to remove door.
Was this helpful?
Thank you for voting!
Light rocker switch broke and refrigerator light couldn't go on.
2 of 4 people
found this instruction helpful.
-
Cathy from HOPATCONG, NJ
- Very Easy
- Less than 15 mins
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this helpful?
Thank you for voting!
Freezer Cold - Refrigerator Warm
3 of 7 people
found this instruction helpful.
-
William from Fairfield Glade, TN
- Easy
- Less than 15 mins
-
Screw drivers
After searching online to diagnose the issue with my refrigerator being warm and the freezer being cold and not shutting off to defrost I decided to get the defrost timer kit. The kit arrived within 2 day. With the directions included, after unplugging the appliance for safety, I installed it relatively quickly with only a screwdriver . I
... Read more
then plugged it back in and it immediately went to defrost. I thought, wow I have it fixed. Well unbeknownst to me it still didn't cool in the fridge area. After doing more internet research I found a suggestion to unplug the fridge for 24 hours to unthaw ice that may be lodged between the freezer and fridge that is blocking the distribution of cold air into the fridge. After doing this, it now works like a charm.
Read less
Was this helpful?
Thank you for voting!
no drawer
1 person
found this instruction helpful.
-
Xiaoping from KIRKLAND, WA
- Really Easy
- Less than 15 mins
just insert
Was this helpful?
Thank you for voting!