1068648621 Kenmore Refrigerator - Instructions

All Instructions for the 1068648621
106 - 120 of 176

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lights didn't always come on when was opened
0 of 1 people found this instruction helpful.
  • Gary from Jenkintown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Was this helpful?
Thank you for voting!
the front wheel broke
0 of 1 people found this instruction helpful.
  • Mary from Pelham, NY
  • Easy
  • Less than 15 mins
  • Screw drivers
First I had to tilt the refrigerator on wood on the supports under the refrigerator, the wheels were easy to get to then I unscrewed the old ones and replaced them with the new better wheels. The old ones where plastic.
Was this helpful?
Thank you for voting!
old switch left freezer bulb always-on
0 of 1 people found this instruction helpful.
  • JONATHAN from ELKINS PARK, PA
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Unplug appliance. Socket wrench to unscrew two screws. Module drops down. disconnected two press-on wires by prying off with screwdriver. Removed old switch. Press-fit new switch. Reconnected two wires (color coded). Screwed module back in place. Plug in appliance.
Was this helpful?
Thank you for voting!
thread broke
0 of 1 people found this instruction helpful.
  • uri from riverhead, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
Unscrew broken piece, pull it out and then insert new one, security it in place and connect water line again, make sure It's thight check for leaks and done
Was this helpful?
Thank you for voting!
Door Light switch cracked Mounting
0 of 1 people found this instruction helpful.
  • Paul from Hinsdale, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this helpful?
Thank you for voting!
The fill tube froze and cracked
0 of 1 people found this instruction helpful.
  • Phillip from Sellersburg, IN
  • Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
It was easy and quick to find the part that I needed, order it and have it shipped. The fill tube arived in 3 days and was easy to replace.
Was this helpful?
Thank you for voting!
Part broke.
0 of 1 people found this instruction helpful.
  • Felix A from Orlando, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replacement partfit perfectly.
Was this helpful?
Thank you for voting!
light would work intermitently
0 of 1 people found this instruction helpful.
  • Gregory from middle island, NY
  • Easy
  • Less than 15 mins
  • Screw drivers
removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.
Was this helpful?
Thank you for voting!
Broken light switch
0 of 1 people found this instruction helpful.
  • George from North Scituate, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Was this helpful?
Thank you for voting!
Replace Bad Switch
0 of 1 people found this instruction helpful.
  • carlos from haverstraw, NY
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
Was this helpful?
Thank you for voting!
light switch would not work
0 of 2 people found this instruction helpful.
  • Joseph from Destin, FL
  • Really Easy
  • Less than 15 mins
Popped the old one out with a kitchen knife and popped the new one back in. It tool less than 15 seconds!!
Was this helpful?
Thank you for voting!
Water Line To Ice Maker Broke
0 of 2 people found this instruction helpful.
  • Lennon from Phoenix, AZ
  • Easy
  • Less than 15 mins
  • Screw drivers
Looked up the process on you yube and watched the repair video from the parts website
Was this helpful?
Thank you for voting!
non-functioning refrigerator lite switch
0 of 2 people found this instruction helpful.
  • Ronald from Billings, MT
  • Really Easy
  • Less than 15 mins
  • Pliers, Wrench set
My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate
(manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close
door and plug back in. Open door to check that the lite
works. Walla! It did. Thanks!

Sin cerely, Ron Marshall, Billings, MT
Was this helpful?
Thank you for voting!
The light went out
0 of 2 people found this instruction helpful.
  • Janet from Flagstaff, AZ
  • Easy
  • Less than 15 mins
  • Screw drivers
I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.
Was this helpful?
Thank you for voting!
replace hinge bracket on fridge door
0 of 2 people found this instruction helpful.
  • Albert from Dunmore, PA
  • Easy
  • 15 - 30 mins
  • Socket set
taped the door shut ,measured a block of wood and stuck it under the door for support.....unbolted bottom hinge,slipped on hinge bracket and reassembled.no muss no fuss.
Was this helpful?
Thank you for voting!
All Instructions for the 1068648621
106 - 120 of 176