1065115 Kenmore Refrigerator - Instructions

All Instructions for the 1065115
76 - 90 of 267

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fridge stopped cooling then the freezer
4 of 4 people found this instruction helpful.
  • Joseph from DELTONA, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Searched my issue on the internet then chose part select to see if bi-metal thermostat was available and it was so I ordered part which was under $30.00 incl. shipping. I then went to You Tube to watch how to replace the part but most importantly to find out where it was located and degree of difficulty. Replacement was rather simple and it fixed our 22 year old fridge. I must add that when I looked up the part it also told you what percent of the time that particular item actually fixed the problem based on others experience. I thought that was neat info. as I felt better about ordering something that may or may not fix my problem. Thank you,
Was this helpful?
Thank you for voting!
intermittent clicking noise; otherwise fridge seemed to be working fine
4 of 5 people found this instruction helpful.
  • Peter from EUGENE, OR
  • Really Easy
  • 15 - 30 mins
  • Pliers
Googled "intermittent clicking noise" or something similar and consensus was it was either the capacitor or compressor start relay. You-tubed videos on how to replace these. Looked easy. Just unplug them from the condenser and replace. Contacted Part Select and staff said 50% of the the time it was the capacitor, 50% of the time it wa s the relay. I was in a time crunch so I ordered both and they came in a couple of days. I replaced the capacitor but the clicking noise continued. I replaced the relay and problem solved! Maybe I could have gotten away with just replacing the relay, but I had them both by then and figured with a 10 year old fridge, better replace them both at the same time and be done with the problem. So far, so good.
Was this helpful?
Thank you for voting!
Broken light switch
4 of 5 people found this instruction helpful.
  • Terry from WARMINSTER, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Watched video. Unplugged refrigerator and popped out switch. In plugged connector and pushed switch in place. Plugged in refrigerator and the light worked
Was this helpful?
Thank you for voting!
Refridge door Gasket needed replacememt
4 of 5 people found this instruction helpful.
  • Evelyne from LOS ANGELES, CA
  • Very Difficult
  • 30 - 60 mins
  • Screw drivers
Unfortunately the replacement part did not work. The directions required that the older Gasket had to be removed before the new could be inserted. The original gasket was inserted into a groove on the door and also "glued" in some way to the door.

When an area on the side of the door was carefully pulled out it revealed that the new one was insufficient to replace the original.. It was substantially thinner and did not have the design that extended and went into the groove on the door. It needed to go in the slot of the same size and width. There was no such part and no way the new gasket would/could attach to the door.. There was no way to attach this new part. This meant that it wouldn't fit and successfully close the door.
Was this helpful?
Thank you for voting!
old filter was overdue for replacement
4 of 5 people found this instruction helpful.
  • gene from COTTONDALE, FL
  • Very Easy
  • Less than 15 mins
ordered new filter, removed old filter from fridge, and installed new one
Was this helpful?
Thank you for voting!
Filter indicator light red
6 of 11 people found this instruction helpful.
  • Scott from ONEIDA, NY
  • Easy
  • Less than 15 mins
Found the filter door in toe kick under freezer door. Opening the door ejected the old filter. Direction indicator arrows were found on inside of filter door, rotation of filter to match arrows important. Pushed new filter in to stop, closing door completed insertion of new filter.
Was this helpful?
Thank you for voting!
the icemaker make the noise, but wouldn't produce ice. When we took the ice tray off, we saw that the metal piece that turned the ice crusher was broken.
7 of 14 people found this instruction helpful.
  • Ruth from Eureka, IL
  • Easy
  • Less than 15 mins
  • Screw drivers
I used the computer to enter the make and model of the refrigerator with the icemaker unit. We looked at the diagram to identify the name of the part and then ordered it. It was sent out the next day! We received it and installed it and it works perfect!
Was this helpful?
Thank you for voting!
Old one leaks on one side
4 of 5 people found this instruction helpful.
  • Orlando from Bayonne, NJ
  • Very Easy
  • Less than 15 mins
Simply cut the water tube on both sides of connector and push in the new one.
Was this helpful?
Thank you for voting!
ice container bin cracked and had a hole in it.
5 of 9 people found this instruction helpful.
  • Joseph from MESQUITE, NV
  • Very Easy
  • Less than 15 mins
Took it out of the box. Emptied the ice out of the broken bin. Slid the new one in and all done.
Was this helpful?
Thank you for voting!
Raplaced switch
5 of 9 people found this instruction helpful.
  • Winston A from Brooklyn, NY
  • Really Easy
  • Less than 15 mins
  • Pliers
Repair went well,took about five to ten minutes to disconnect the power from the fridge removed the defective switch installed the new one ,reconnected the power,,,and Let there be light and there was light!
Was this helpful?
Thank you for voting!
Valve leaking water
4 of 6 people found this instruction helpful.
  • Steven from WEST JORDAN, UT
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
Unhooked water line from house to fridge then unbolted valve from fridge body then removed plastic water line from fridge to valve by pushing in on pex release tab then reversed process with new valve. Works like a charm. No more leakage. Wood floor is dry and Happy!
Was this helpful?
Thank you for voting!
Top half of freezer & fridge were not cooling. Freezer fan had been making unusually loud noises.
3 of 3 people found this instruction helpful.
  • rich from PEMBROKE PNES, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Piece of cake. It took me longer to remove the food from the freezer, remove shelves and back panel than to do the repair. I heard the fan making some noises so I replaced both the fan and defrost thermostat. I used the instructions submitted by a another customer. My 20+ year old fridge is like new now.
Was this helpful?
Thank you for voting!
I needed a new drawer for my refrigerator
3 of 3 people found this instruction helpful.
  • Jennifer from VANCOUVER, WA
  • Very Difficult
  • 30 - 60 mins
I thought I ordered a new drawer to replace the one that was missing. Apparently I only ordered the plastic part of the drawer, not the drawer ASSEMBLY, which required me to also order 2 plastic wheels, 2 wheel axels and a handle trim piece. The sum of all the pieces needed to replace my drawer assembly was going to be $250. That's rid iculous. SO I decided to send the plastic drawer back -- which cost me $70 in shipping. I will not be purchasing anything from PartSelect again.
Was this helpful?
Thank you for voting!
Freezer work perfectly, Refrigerator Stopped getting cold, water line froze, there was ice Forming around the condenser in the bottom of the refrigerator behind the drawers
3 of 3 people found this instruction helpful.
  • Richard from STATEN ISLAND, NY
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
Freezer worked great, refrigerator stopped getting cold and lots of ice formed around the condenser on the bottom of the refrigerator.
First I had a serious ice issue, ice build up around the bottom of the refrigerator and all through the cold air vents, condenser and cooling fan. I unplugged of the fridg and let defrost over night. I also took all the cold air vents out and cleaned them.
Then I followed the switch install video very simple switch install. Now the Refrigerator works Great nice and cold.
Was this helpful?
Thank you for voting!
Freezer was icing up and leaking. Refrigerator side would not keep cold.
3 of 3 people found this instruction helpful.
  • Camille from Glen Ellyn, IL
  • Easy
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers
We emptied out both sides, refrigerator and freezer, and followed the instructions in your video. We turned it off and disconnected the power. We took off the freezer door first. It made it much easier to get the shelves out and reach way back into the freezer. We removed the light and cover, then the ice auger motor. The back panel wa s easy to lift and remove. The wire assembly was a little hard to understand at first, but when we figured it out it was easy to remove and replace the bimetal defrost thermostat. We did check the video when we had the wire harness out, to make sure we got it right. We reassembled the freezer's inside parts and reattached the door. Before we turned the power back on, we scrubbed down the entire refrigerator. When we turned the power back on, the refrigerator and freezer were operating quietly - no sparks or explosions or shorting out - hooray! And the problems were solved.
The most important resource is your video. It looked like something we could do, and then ordered the parts. Our repair took a long time because we checked the video so many times. Thank you so much for the great information and the excellent parts. We could not have done it without you.
Was this helpful?
Thank you for voting!
All Instructions for the 1065115
76 - 90 of 267