KitchenAid Washer Switches

KitchenAid Washer Lid Switch

★★★★★

★★★★★

23 Reviews

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.

KitchenAid Washer Lid Switch Assembly With Leads

★★★★★

★★★★★

59 Reviews

This switch (Lid Switch Assembly With Leads, Washer Lid Switch, Lid Switch Assembly, Washer Lid Switch) tells the washing machine that the lid is closed, which allows the wash cycle to begin. The lid switch mounts to the underside of the cabinet top panel. The plastic on the actuator can become brittle with age and break when the lid is closed roughly. It can also break from the movement of an unbalanced load causing parts of the washer to strike it. This part must be replaced if it is broken and no longer being activated by closing the lid (indicated by the washer not agitating properly, or the machine not detecting the lid is closed). This switch is black plastic with wire leads. It is sold individually.

KitchenAid Washer Lid Switch

★★★★★

★★★★★

7 Reviews

Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.

KitchenAid Washer Lid Switch Assembly

★★★★★

★★★★★

12 Reviews

If your washer won’t start, spin, or drain, the lid switch might be the problem. This part makes sure the lid is closed before the machine runs. It’s a simple safety feature that keeps everything working smoothly. Just unplug your washer before installing, and check that it fits your model.

KitchenAid Washer Water Level/pressure Switch

★★★★★

★★★★★

6 Reviews

This water level switch senses the level of water in the inner tub.

KitchenAid Washer Water Level Pressure Switch

★★★★★

★★★★★

5 Reviews

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

KitchenAid Washer Water Level Switch This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

KitchenAid Washer Water Level Switch

★★★★★

★★★★★

1 Review

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

KitchenAid Washer Water Level Switch This water level switch senses the level of water in the inner tub.

KitchenAid Washer Water Level Switch

★★★★★

★★★★★

1 Review

This water level switch senses the level of water in the inner tub.