Kenmore Range Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Range Switches
Kenmore Range Infinite Burner Switch - Large Element
PartSelect Number PS1145040
Manufacturer Part Number 316436001
This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.
Fixes these symptoms
- Element will not heat
- Little to no heat when broiling
- Oven is too hot
- See more...
Kenmore Range Surface Burner Element Switch, Large
PartSelect Number PS11740783
Manufacturer Part Number WP3149400
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Oven not heating evenly
- See more...
Your Price
$74.43
Kenmore Range Surface Burner Switch - 8 Inch 2500w
PartSelect Number PS236750
Manufacturer Part Number WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Kenmore Range Infinite Burner Switch - Small Element 240v
PartSelect Number PS1145039
Manufacturer Part Number 316436000
This switch controls the stove top surface burner.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Kenmore Range Infinite Control Switch, 6"
PartSelect Number PS11740785
Manufacturer Part Number WP3149404
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Kenmore Range Infinite Switch - 8 Inch
PartSelect Number PS11740775
Manufacturer Part Number WP3148953
This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- See more...
Your Price
$69.15
Kenmore Range Surface Element Control Switch - 6 Inch 1560 W
PartSelect Number PS236754
Manufacturer Part Number WB24T10029
If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, not just in set steps. It works by turning the burner on and off to reach the temperature you want. Swapping out a worn switch can help your stove cook more evenly and safely.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Your Price
$107.61
Kenmore Range Infinite Switch
PartSelect Number PS12114485
Manufacturer Part Number W11129442
This surface burner switch is an essential component for electric ranges, controlling the power and heat level of the left front burner. It regulates the temperature by cycling the burner on and off to maintain the selected heat setting. If the switch is faulty, the burner may not heat properly, may remain stuck at one temperature, or may fail to turn on at all.
For installation, first, unplug the range or switch off the circuit breaker to prevent electrical hazards. The control panel must be accessed by removing the back panel or control knobs, depending on the range model. Once the old switch is detached from the wiring harness, the new switch can be installed by reconnecting the wires in the correct configuration and securing it in place. Always wear work gloves to protect your hands.
Fixes these symptoms
- Element will not heat
- See more...
Kenmore Range Infinite Burner Switch - 8 Inch
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
- Element will not heat
- See more...
Kenmore Range Dual Surface Element Switch
PartSelect Number PS3504401
Manufacturer Part Number 316238201
This switch controls the stove top surface burner. This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part.
Fixes these symptoms
- Element will not heat
- See more...
Related Kenmore Range Parts
- All Kenmore Range parts
- Kenmore Range Bearings
- Kenmore Range Brackets and Flanges
- Kenmore Range Caps and Lids
- Kenmore Range Circuit Boards and Touch Pads
- Kenmore Range Cooktops
- Kenmore Range Deflectors and Chutes
- Kenmore Range Doors
- Kenmore Range Drawers and Glides
- Kenmore Range Drip Bowls
- Kenmore Range Ducts and Vents
- Kenmore Range Electronics
- Kenmore Range Elements and Burners
- Kenmore Range Fans and Blowers
- Kenmore Range Filters
- Kenmore Range Fuses
- Kenmore Range Grates
- Kenmore Range Handles
- Kenmore Range Hardware
- Kenmore Range Hinges
- Kenmore Range Hoses and Tubes
- Kenmore Range Igniters
- Kenmore Range Ignitions
- Kenmore Range Insulations
- Kenmore Range Knobs
- Kenmore Range Latches
- Kenmore Range Legs and Feet
- Kenmore Range Lights and Bulbs
- Kenmore Range Manuals and Literatures
- Kenmore Range Motors
- Kenmore Range Panels
- Kenmore Range Power Cords
- Kenmore Range Racks
- Kenmore Range Seals and Gaskets
- Kenmore Range Sensors
- Kenmore Range Springs and Shock Absorbers
- Kenmore Range Thermostats
- Kenmore Range Touch-Up Paint
- Kenmore Range Transformers
- Kenmore Range Trims
- Kenmore Range Valves
- Kenmore Range Wheels and Rollers
- Kenmore Range Wire Plugs and Connectors