Kenmore Range Sensors

Popular Kenmore Range Sensors

Your Price
$78.07
  In Stock
Kenmore Range Temperature Sensor
★★★★★
★★★★★
49 Reviews
PartSelect Number PS1528542
Manufacturer Part Number 316490000
The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • See more...
Your Price
$108.70
  In Stock
Kenmore Range Oven Sensor
★★★★★
★★★★★
52 Reviews
PartSelect Number PS11749737
Manufacturer Part Number WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Your Price
$51.09
  In Stock
Kenmore Range Probe
★★★★★
★★★★★
8 Reviews
PartSelect Number PS11731754
Manufacturer Part Number 316233903
Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • See more...
Your Price
$62.10
  In Stock
Kenmore Range Temperature Sensor
★★★★★
★★★★★
26 Reviews
PartSelect Number PS11758156
Manufacturer Part Number 5304504897
This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of durable metal, it’s designed to replace faulty sensors that may cause overheating, uneven baking, or F3/F4 error codes. This genuine replacement part is compatible with select models. Always disconnect power to the appliance before beginning installation for safety.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Your Price
$36.73
  Special Order
Kenmore Range Temperature Sensor
★★★★★
★★★★★
7 Reviews
PartSelect Number PS10059162
Manufacturer Part Number WB21X22134
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. The sensor is usually located in the back of the oven. This is a genuine OEM part. Please make sure to disconnect the power to your range before starting your repair.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Your Price
$80.31
  In Stock
Kenmore Range Temperature Sensor
★★★★★
★★★★★
38 Reviews
PartSelect Number PS820208
Manufacturer Part Number 316217002
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Little to no heat when broiling
  • See more...
Your Price
$53.22
  In Stock
Kenmore Range Long Oven Sensor
★★★★★
★★★★★
27 Reviews
PartSelect Number PS1570174
Manufacturer Part Number 12001656
The oven sensor detects the temperature within the oven cavity and sends the information to the control board. If your oven is not heating evenly, has little or no heat when baking, or is too hot, you may need to replace the sensor. This long oven sensor kit comes with two harness adapters and is a genuine OEM part. Please remember to disconnect the power before starting your repair.
Fixes these symptoms
  • Door won’t open after self cleaning cycle
  • Element will not heat
  • Little to no heat when baking
  • See more...
Your Price
$150.68
  In Stock
Kenmore Range Sensor
★★★★★
★★★★★
11 Reviews
PartSelect Number PS11726314
Manufacturer Part Number W10833885
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control board to adjust heating as needed. Over time, exposure to high temperatures can cause the sensor to degrade, leading to uneven heating or failure to maintain set temperatures. If your oven struggles to reach or hold the correct temperature, replacing the sensor may resolve the issue. This OEM replacement part includes a wire harness for connection and is installed using two mounting screws. Installation is simple and typically requires only a screwdriver. Please note that the sensor is sold individually and does not include additional hardware.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Your Price
$103.87
  In Stock
Kenmore Range Temperature Sensor
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11732697
Manufacturer Part Number EBG61305805
This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor internal temperatures and regulate heating or cooling elements accordingly. If your appliance is experiencing inconsistent temperature control, the sensor may be defective and can be tested using a multimeter for continuity. Refer to your user manual for exact placement and diagnostic procedures. Sold individually.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • See more...
Your Price
$47.53
  Special Order
Kenmore Range Oven Sensor
★★★★★
★★★★★
8 Reviews
PartSelect Number PS236043
Manufacturer Part Number WB21X5301
This sensor detects the temperature within the oven cavity.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...

Related Kenmore Range Parts