Frigidaire Refrigerator Dispensers

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

This dispenser module is for refrigerators. The dispenser module attaches to the dispenser housing on the freezer door and includes the cradle, ice chute, and ice chute door. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

This dispenser module is for refrigerators. Dispenser module attaches in the dispenser housing on the freezer door and includes the cradle, ice chute and ice chute door. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

This part is the replacement dispenser grille for your refrigerator. It is made of black plastic and is approximately 10 inches wide and 4 inches deep. The dispenser grill sits at the bottom of your ice dispenser assembly and catches any spills when your ice or water dispenser is running. If your dispenser grille/drip tray is missing or damaged, this is the part that replaces it. To replace the dispenser grille, simply remove it and insert the new one. This part is sold individually and is and authentic OEM part sourced directly from the manufacturer.

This part works in conjunction with the ice chute door.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

This is just the cover. Label module cover must be ordered separately.

This is the ice actuator or ice actuator arm for your refrigerator. When you depress the actuator arm with a glass or bucket, ice is normally dispensed. If your current actuator arm is broken, missing, or if the ice dispenser isn’t dispensing ice, you may need to replace it. To access the actuator, you will first need to remove the dispenser assembly, and then remove the actuator from the assembly. Be sure to shut off the water and power source from your refrigerator before you begin this repair.