Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
May 1, 2018
Do I need other parts when I replace this part?
Hi Joan, Thank you for the question. The parts are reusable, so if they are not damaged no other parts are needed. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
February 21, 2020
The black cap and foam insert came off.Is there a video or instructions on how to put it back on the icemaker shoot?
thank you for any assistance you can provide.
judy
For model number FFHS2311LWQA
Hello Judy,
Thank you for your question. First you will need to remove the freezer door handle, remove the dispenser drip tray, then remove the dispenser frame by unscrewing the screws at the bottom, then pull up the frame, and remove the ribbon connector on the control board. Remove control board bracket by unscrewing it, then remove the control board to access the tubing behind it by unscrewing the board from the bracket, then disconnect the power plug on the left of the board to access the water tube. You will need to use pliers to pull out the water tube, so you can take the bracket assembly from the dispenser. You will then need to unscrew the two screws behind the bracket to remove the actuator. Press down on the door flapper to remove the actuator. Press down on the door flap to remove the old one and install the new one, and repeat these steps backwards to install everything back where it was. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Everett
September 29, 2023
Does this part come with the white installation, or do i but that separate?
For model number FRS26LH5DS9
Hi Everett, thank you for the great question. Yes, this part comes with the white insulation. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angelica
October 1, 2023
Does this flap come with the insulation as well or is only in the picture for display . There was ice stuck on my dispenser And when I went to go take it out, the piece came out and as I did research not knowing where the heck this came from. I realized it goes where belongs, but my insulation That's in the freezer looks not okay condition so I want to replace it but I noticed that it's 50 bucks and this flap is a little cheaper so I wanna know if it comes together or not.
For model number FFHS2311LWNA frigidaire
Hi Angelica, thank you for reaching out. Based on our research, the dispenser door flap you have mentioned does not come with the insulation. The ice chute door insulation is part number PS1526428. We hope this information helps!
Hi Greg, thank you for reaching out. The dispenser door flap that you have mentioned does not come with the door insulation. The door insulation is part number PS1526428, and it is sold separately. We hope this information is useful!
My model is not matching your for this product. The ice dispenser insulation
For model number LFSS2612TF0
Hello Odessa, Thank you for the question. The parts to the Dispenser for this model are only sold as part of the Dispenser Module assembly, PartSelect Number PS12728800. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi Dm,
Thank you for your question. The dispenser door flap for your model is sold with the dispenser module. The part number listed under your model number for the dispenser module is PS12728800. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Is this the hard cover that needs to be the door side of the ice dispenser? Our refrigerator came with the silicone circle piece, but we are missing a part that allows the ice to actually come out of the fridge door when we click the dispenser. Is this that part?
For model number FFSS2614QS1A
Hi Julia, Thank you for writing. The Dispenser Door Flap is the part that opens that allows the ice to drop when dispensed. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
An ice chute is mounted to the interior panel and extends between the interior panel opening and the dispenser opening for transferring ice through the chute door.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1526427
Manufacturer Part Number: 241688501