Washer Pumps

Washer Washing Machine Drain Pump

★★★★★

★★★★★

109 Reviews

The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.

Washer Drain Pump

★★★★★

★★★★★

74 Reviews

This washer drain pump is designed to remove wastewater during and after the wash cycle, ensuring proper drainage and efficient operation. If your washer retains water after a cycle or shows signs of leaking near the pump, the component may be faulty and require replacement. Measuring for continuity with a multimeter before replacing is recommended. Installation involves partial disassembly of the appliance, and the pump is sold individually without additional accessories or wire harnesses. Always disconnect power before beginning repairs.

Washer Direct Drive Water Pump

★★★★★

★★★★★

61 Reviews

This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.

Washer Drain Pump

★★★★★

★★★★★

126 Reviews

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. It has two ports for water to pass through: a large one, and a smaller one. This pump also comes with a removable filter.

Washer Drain Pump Kit

★★★★★

★★★★★

48 Reviews

If your washer isn’t draining properly or is leaking water, this drain pump could be the fix. It’s made for front-load models from Whirlpool, Maytag, Kenmore, and more. The pump helps remove water during the wash cycle and keeps your machine running smoothly. Common signs it needs replacing include loud noises, drainage errors, or water left in the drum. Just check your model number to make sure it’s the right fit.

Washer Drain Pump Assembly

★★★★★

★★★★★

6 Reviews

This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.

Washer Water-pump

★★★★★

★★★★★

6 Reviews

This drain pump is engineered for top-load washing machines and plays a vital role in the appliance’s drainage system. During the drain cycle, it efficiently removes water from the washer tub and channels it through the drain hose into your home’s plumbing. If your washer is experiencing slow drainage, unusual grinding or rattling noises, or standing water at the end of a cycle, the pump may be malfunctioning. Common causes include wear over time, electrical issues, physical damage, or clogs from small items like coins or buttons. Replacing a faulty drain pump can restore proper function and prevent further issues with your machine’s performance.

Washer Drain Pump - 120v 60 Hz.

★★★★★

★★★★★

27 Reviews

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

Washer Drain Pump Assembly This washer drain pump assembly is a genuine OEM component designed to efficiently remove water from the tub during the drain cycle. Engineered for durability and reliable performance, it helps maintain proper drainage and supports the overall functionality of the appliance. Compatible with select washing machine models, this part may include multiple components—refer to your model’s parts diagram for a complete list. Before installation, unplug the washer and shut off the water supply to ensure safety. Verifying compatibility with your specific model is recommended prior to purchase.

Washer Drain Pump - 120v 60hz

★★★★★

★★★★★

4 Reviews

This washing machine drain pump is a key component responsible for removing water from the tub during the drain cycle. Designed for select top-load washers, it ensures efficient water expulsion and supports proper cycle completion. Constructed from durable materials, the pump assembly includes a motor that activates during the drain phase, helping to prevent water retention and potential overflow. It is commonly replaced when the washer fails to drain, produces unusual noises, or leaks water. Compatible with models from Whirlpool and associated brands such as Maytag, Kenmore, and KitchenAid, this part should be installed with the appliance unplugged and verified for model compatibility prior to purchase.