Uni Refrigerator Ice Makers

Uni Refrigerator Ice Maker Assembly

★★★★★

★★★★★

19 Reviews

This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Uni Refrigerator Ice Container And Auger Assembly

★★★★★

★★★★★

1 Review

This ice container assembly is a genuine OEM replacement part for your refrigerator. This kit includes the container that holds the ice, along with the auger and blades. Replacing this assembly is an easy repair that does not require any tools. First turn the ice maker off, then remove the old container from the freezer. Line up the connector with the auger yoke, then slide the new container into place. The ice maker can be turned back on, and you will be all set.

Uni Refrigerator Replacement Ice Maker

★★★★★

★★★★★

8 Reviews

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.

Uni Refrigerator Ice Dispenser Drum

★★★★★

★★★★★

3 Reviews

This genuine replacement ice dispenser drum is designed for use with a wide range of refrigerator models. Made from durable plastic, the drum plays a key role in your ice maker by capturing ice and directing it to the crusher for dispensing. It is positioned between the ice dispenser drive plate and the ice crusher mounting plate, ensuring smooth and efficient operation. If the drum becomes damaged or worn, replacing it is a simple process. All you’ll need is a Phillips head screwdriver. Just remove the necessary components to access the drum, unfasten it, and install the new one in its place. This part is sold individually and is compatible with many refrigerator models—check your model’s diagram to confirm fit.

Uni Refrigerator Ice Container/bucket

★★★★★

★★★★★

2 Reviews

This genuine OEM ice container, also known as an ice bucket, is designed for use in refrigerators to store ice cubes. It should be replaced if it develops significant cracks or breaks that could affect performance. To remove the container, open the freezer door and lift it out, ensuring the ice maker’s shut-off arm is in the off position. Transfer the front panel, access door, shield, crusher assembly, and auger assembly from the old container to the new one—without disassembling the crusher and auger assembly, if possible, to simplify the process. When aligning the control rod, make sure one set of crimps sits in front of the crusher assembly plate and the other behind it. To secure the other end, hook the spring around the tab at the bottom of the container and tuck the bracket behind the tab. Engage the rod’s hook by rotating it into the flapper door. Reinstall the front panel and access door by aligning the holes and fastening them in place. Finally, snap the guard back onto the side rails of the bin, ensuring the ridged edge faces forward. Please note that this replacement part includes only the ice bucket; additional components must be purchased separately.

Uni Refrigerator Ice Dispenser Solenoid

★★★★★

★★★★★

2 Reviews

The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz

Uni Refrigerator Dispenser Crusher Housing

★★★★★

★★★★★

5 Reviews

This dispenser crusher housing, also known as a refrigerator ice crusher housing, is a genuine replacement part compatible with various refrigerator models. It functions as a protective cover for the ice crushing blades located within the ice container. To complete this repair, you’ll need a Phillips screwdriver, a flat-blade screwdriver, a 1/4-inch nut driver, and a pair of channel lock pliers. Wearing work gloves is recommended for safety. Please note that the replacement part may differ in appearance or color from the original, but it is designed to fit and function exactly the same.

Uni Refrigerator Drive Gear

★★★★★

★★★★★

9 Reviews

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.

Uni Refrigerator Drive Bar Experience a whole new level of efficiency with your Frigidaire appliances by simply replacing an old part with our genuine OEM Drive Bar. This small but mighty part is specifically engineered for a wide range of Frigidaire, Electrolux, White Westinghouse, and Tappan models. It plays a key role in your refrigerator: it couples with your auger motor to ensure your ice is dispensed smoothly and swiftly, every time. Installing this Drive Bar can breathe new life into your refrigerator, making it function as good as new! The installation process is straightforward - it attaches securely to the auger drive motor, meshing perfectly with your ice container auger. Before you get started, we recommend unplugging your refrigerator first for safety. Make sure to store any perishable food items elsewhere and to wear work gloves while working. By following these simple steps, you'll not only get your appliance back in top shape but also extend its long-term performance. Replacing parts has never felt more confident and hassle-free!

Uni Refrigerator Ice Container

★★★★★

★★★★★

1 Review