Tappan Cooktop Parts

This drip bowl is sold individually. This part is located beneath the element and catches spills from cooking.

This drip bowl is located beneath the element and catches any spills. It is sold individually and has a diameter of approximately 10 inches.

This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.

This round chrome drip pan contains a center hole of approximately four inches wide.

This switch controls the stove top surface burner.

Liquid collecting beneath a burner pan may mean the surrounding gasket is damaged or out of place. The seal sits between the cooktop and drip pan to block spills from leaking through the joint. First check that the pan is seated correctly and that food buildup is not holding it above the surface. Match the replacement to the complete model number before purchase. Work only when the appliance is cool, and disconnect power or close the gas supply if the repair requires opening the cooktop. Remove the old gasket material, wipe the surface clean and dry, then install the seal in the same position without using unapproved adhesive.

Use this igniter with sealed burners.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Bring steady heat back to a large cooking area with this 8-inch electric coil element. Rated at 2,100 watts, it turns electrical power into heat for boiling, frying, and other stovetop tasks. The burner has five coil turns, looped terminals, and a chrome center cap. Replacement may be needed when the old element does not heat, works only at times, or has visible cracks, blisters, or burned areas. Check the burner socket for damage before installation. Unplug the range or switch off its circuit breaker, let the cooking surface cool, and wear work gloves before removing the old element.