Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrea H - October 4, 2019
Verified Purchase
Fast shipping, easy install
Everything working perfectly now and works great!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
November 6, 2018
Flashes pf but wont clear the power failure code. Once the door is closed no code at all. Flip the breaker off and on the pf code flashes again but wont clear, and again once the door is closed the code goes away but no display at all.
For model number FGID2466QF3A
Hello Rob, thank you for your question. This sounds like an issue with the control board. The PF code indicates there is a power failure to the board. We would recommend replacing Electronic Control Board Part Number: PS11758074. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cathy
January 12, 2020
No lights come on at all when i try to run the dishwasher. Is the console assembly the part i need? The dishwasher is getting power.
For model number FGID2466QF2A
Hello Cathy,
Thank you for your question. Our sources suggest to replace the console assembly for your model under part PS9865008 to fix the dishwashers issues. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Deb
November 4, 2021
The problem is when I have a power failure it acts up right now you can press the cycle you want but the button to turn on won't work. Sometimes it runs on it ow and sometime no light at all on it. I not sure if it the control panel or the mother board
For model number Fgid24660f3a
Hello Deb, thank you for your question. If the problem is only when you have a power outage, your appliance may just need to be reset. Disconnect your appliance from the power source for 1-3 minutes by unplugging it or turning off the breaker. If this does not work you may need to replace the control board. Part number PS12365809. We hope this helps.
Hi Joe, thank you for the question. We have found that the code CD means close door. It indicates that the dishwasher does not think the door is shut. If you have opened and closed the door firmly and you still get the error, your door latch assembly, part number PS16218716, may need to be replaced. We hope this information is useful!
The display lights up but nothing runs and the timer doesn't start counting down. Thank you
For model number FGID2466QF3A
Hi Dale,
Thank you for your question. The parts to check first would be your door latch and your control panel. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Clinton
May 11, 2022
I am getting code UO and the will turn on run just a moment and this code comes up
For model number FGID2466QF6A
Hello Clinton, thank you for your inquiry. The ER UO error code means "Vent Open". On the top back right corner of the dishwasher tub, there is a vent and fan that opens to help dry the dishes at the end of the cycle. If the computer senses that the vent is open, then it won't start the cycle. Frigidaire says to first check the wiring and connections. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Ethan
May 25, 2022
Everything works in the controls board but when I hit start it doesn’t say close door and it will not start working. What part do you think it is that needs to be fixed.
For model number FGID2466QF5A
Hello Ethan, Thank you for the question. This is normally an indication the Latch Assembly is faulty and needs to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
How do you release the lock on the door. we have the door open but it wont unlock so we can close it
For model number FGID2466QF4A
Hello Thomas, Thank you for your inquiry. We have researched the model number that you have provided and if the door lock will not release but the door is open, we would recommend replacing the lock latch, part# PS12585469. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Had the pf code. Open door and I get nothing. Leave door open and switch breaker, get the pf code and cancel will not clear it. I've now replaced the door latch and the control board. Now when I open the door I get lights and no error codes but nothing will work when I push the buttons. Nothing will start. and eventually the lights will just go out. What's my issue here ? Thank you
For model number fgid2466qf3a
Hello Nate, thank you for your question. Please make sure the control board is properly installed and there is no loose or missing connection. Also, look for any damaged wire. Given that we are good there the console assembly, part number PS9865008, is most probably faulty. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
