Average Repair Rating: 4.8 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
broken spark ignitor/ broken spray arm holder
removed burners from cooktop, hardest part was to lift glass top because of the double back tape holding unit to counter, replaced damaged ignitor clip and reinstalled with new one, placed all parts back, job done. On dishwasher it was as simple as using nut driver to drive 8/16 self tapping screw onto new part and checking for arm rotating without hitting anything. done. thanks guys!
1. Unscrew the nozzle part from the dish rack and pull it down from the clip side. 2. Replace the new nozzle by inserting the plain side in first and clip it in. 3. Tighten the screw. 4. Insert the spray arm hole in the nozzle and tighten the screw with washer. 5. Start washing dishes
It was as simple as unclipping one piece and replacing it with the new one then installing the new spray arm with the new screw and washer.
Other Parts Used:
Greg from Jeannette, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
April 5, 2018
My middle spray arm fell off and i cannot find the nut or screw that held it in place. What parts do i need to put
For model number GSD6200J00WW
Hi Robert,
Thank you for your question. To be able to replace that part that you are missing you would have to replace the whole middle spray arm kit. Which is this part: PS959723. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Julien
September 10, 2019
Hi! I broke the big plastic screw at the bottom of the middle spray arm (part 612). The one which maintain the spray arm attached to the hub. Does this screw included in this kit? If not (and it seems not), do i have an another solution to repair my dishwasher? Does this piece sell individually anywhere? Can i replace it by a Generic metal screw? Thanks in advance for your help!
For model number GSD6229G00WW
Hi Julien, thank you for your question. The screw that keeps your arm on is actually stainless steel now. I have linked that part below. Good luck with your repair.