Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Uwe Z - December 20, 2023
Verified Purchase
Easier than i thought to install
Plug and play
★★★★★
★★★★★
Dwayne W - July 31, 2023
Verified Purchase
Easy repair!
With the help of a couple online videos i was able to replace this part in less than a half hour. The new part was exactly the right part and arrived very quickly. Thank you so much partselect!!
★★★★★
★★★★★
Robert I - September 11, 2022
Verified Purchase
Easy repair
It's wonderful to be able to do a simple repair like this myself. I found an online video on how to install the part. There are a few awkward aspects, especially removing and reattaching the plastic bracket that holds the part in place, and it is a bit awkward to snap the part in place, and reinstall the wire anchor for the door seal, but it just took a little time and common sense to figure out.
★★★★★
★★★★★
Gary C - July 21, 2021
Verified Purchase
Part is exactly what I needed
The part was the identical replacement to the original manufacturers part. We have purchased from PartSelect a few times and they are absolutely to deal with. The fastest shipping anywhere. We ordered this part on a Tuesday afternoon and received it around 11am the next day. Thanks very much.
★★★★★
★★★★★
Pierre B - May 27, 2021
Verified Purchase
Perfect
The part is brand new and to specifications. Installed in minutes and the machine is now working as new.
★★★★★
★★★★★
TAN PHAT N - October 7, 2020
Verified Purchase
Worked as expected
Received in good condition
★★★★★
★★★★★
Janice R - April 11, 2019
Verified Purchase
Bosch Washer Door Part
Received within two days of ordering. Fantastic service.
★★★★★
★★★★★
Abbas H - April 4, 2019
Verified Purchase
Short delivery time
The part was sent in a very short period of time
★★★★★
★★★★★
James T - March 18, 2019
Verified Purchase
Exactly what I needed
The part arrived quickly and I had my machine up and running in less than 15 minutes.
★★★★★
★★★★★
Josh H - January 21, 2019
Verified Purchase
Easy repair
When no one local had this part, parts select did, delivered to my door with in 3 days of purchase great site! Great parts! Will definitely use in the future and would recommend to others!!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the door would not latch because the door latch mechanism was broken
i first looked on line to see if there was a video to replace the door switch/lock mechanism. i found one for a different model and it mostly applied. the steps to complete the repair are as follows: 1. disconnect the plug, 2. open the door and remove the garter spring that holds the door seal boot onto the front of the washing machine. 3. roll the boot back to access the door lock. 4. unsnap the retaining bracket. there is limited but enough space to grab the switch. a plastic retaining bracket snaps to the back of the switch. it's a little tricky to pull the switch out but it's possible to unsnap the bracket. 5. pull the switch out of the square hole in the washer front. there aren't any screws on this model washer. the switch is held in place by a groove on one side that slips over the front and the plastic retaining bracket. 6. disconnect the electrical plug. again, there's not much space. the clip that retains the plug in on the switch and it must be pushed out of the way before the wiring plug will come out. it's tough because of the limited space. 7. pull the switch out. 8. remove the manual unlock pull rod from the old switch. install the new switch by 1. reconnecting the electric plug. 2. push the switch into the square hole on the washer front. it goes in on an angle so the groove in one side of the switch goes over the washer front. 3. reclip the plastic retaining bracket. 4. replace the manual unlock rod. this is tricky because it's all be touch. 5. replace the door seal boot. pull it over the ring on the washer front. make sure the seal is properly set in the groove around the door opening. 6. reinstall the door seal garter. this is really tough because the spring is pretty stiff and the wire will want to pull the boot from the groove. i first put the garter about 3/4 of the way around and used some spring clamps to hold it in position while i pulled the spring over the rest of the way. the spring only goes on the boot closest to the door. and that's all there is. i also ordered the "latch" but it was not needed.
Other Parts Used:
Don from MADISON, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
February 22, 2020
I’m getting code f34. I replaced the electrical door lock and it did not fix it. What else could it be?
For model number Was25560UC
Hello and thank you for writing.
The error code "F34" means "The (upper) oven cooling fan air switch not detected". The problem can be a bad air switch, a bad blower fan motor, a clogged vent line or broken wires. The air switch and fan motor can be tested for continuity. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Bonnie
15 days ago
Where can I find instructions for installing
For model number WNM55 Axxis clothes washer
Hello Bonnie, thank you for reaching out. All you have to do is remove the door boot retainer and slip the boot aside. Remove the two retaining screws from the door latch assembly and slip it out through the loose door boot. Be aware that if you tighten the door lock assembly down too tight, it will not operate, so only snug the screws down loosely. We hope this is helpful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8727513
Manufacturer Part Number: 00612148