Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Frank Q - September 14, 2022
Verified Purchase
Worked great,fast delivery
The washing machine was leaking water so I went online to partselect and it was very easy to find this valve.it took only 10 minutes to install.the washing machine is working great.thanks to partselect for the fast delivery.will do business again.
★★★★★
★★★★★
Richard L - April 8, 2022
Verified Purchase
Worked as expected...
Got my part in 48 hours and installed in 15 minutes.
★★★★★
★★★★★
Paul S - March 21, 2021
Verified Purchase
Easily installed, works as expected.
The old valve had developed a leak after 13 years. It was easy to take out and install the new part in its place. I did it myself in about 5 minutes. No more leak.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No hot water going into the washer when hot washes selected
After doing research, I ordered a new hot water inlet valve. After that arrived, I: 1. Turned off the water going into the washer and unplugged it. 2. Pulled the washer away from the wall and unscrewed the cold and hot water intakes to check the filters and make sure they were both clear. 3. Unscrewed the two screws (they were hex heads, so they needed a socket wrench) in the back of the washer (right and left sides) that were holding the top on. Once removed, I removed the top cover to the washer by pushing it back slightly, then popping it off. 4. Used the pliers to loosen the metal clamp attaching a rubber hose to the old hot water inlet valve - disconnected that hose by scooting the clamp back away from the valve and pulling the hose off. 5. Removed the old inlet valve (takes some finagling) and placed the new valve in an identical position. 6. Reattached the hose and clamp to the new inlet valve. 7. Reattached the hot and cold water lines to the washer. 8. Replaced the washer cover and two screws. 9. Turned the water back on and pushed the washer back into place and plugged it back in. 10. Tested a hot water cycle. Fixed!
Other Parts Used:
SARAH from TIJERAS, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clinton
August 21, 2019
Does this part also fit wfmc5440uc/15 as it is not listed in your specs, just the /13.
For model number WFMC5440UC/15
Hello Clinton, thank you for inquiring. After researching your model, I was able to confirm that this Hot Water Inlet Valve part number PS8713230 is the correct replacement for it. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lyle
January 22, 2019
My washer filled with water while not even in use, pushed door open and we had water flood. Is a fill valve replacement the solution?
For model number wfmc3301uc/03
Hello Lyle, Thank you for the question. Yes, the most commonly replaced part is the valve. The valve can become stuck open and allow water to enter the tub even when not in use. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8713230
Manufacturer Part Number: 00422245
