WFMC530SUC-07 Bosch Washer - Overview

Diagrams for WFMC530SUC-07

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Hinge – Part Number: 00651004
$60.96
In Stock
Door Hinge
★★★★★
★★★★★
(33)
Part #00651004
Sold individually.
Cold Water Inlet Valve – Part Number: 00422244
$93.28
In Stock
Bellow Assembly – Part Number: 00667489
$143.05
In Stock
Bellow Assembly
★★★★★
★★★★★
(10)
Part #00667489
This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. It includes the two clamps.
Drain Pump - 120V 60Hz – Part Number: 00436440
No Longer Available
Drain Pump - 120V 60Hz
★★★★★
★★★★★
(14)
Part #00436440
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
Shock Absorber – Part Number: 00642112
$108.98
In Stock
Shock Absorber
★★★★★
★★★★★
(8)
Part #00642112
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
Hot Water Inlet Valve – Part Number: 00422245
$64.24
In Stock
SLEEVE – Part Number: 00422174
$12.29
In Stock
SLEEVE
Part #00422174
WASHER BOOT SPRING CLAMP – Part Number: 00648264
$20.08
In Stock
WASHER BOOT SPRING CLAMP
Part #00648264
DEFELECTOR – Part Number: 00644226
$67.40
In Stock
DEFELECTOR
Part #00644226
CLAMP – Part Number: 00644646
$20.08
In Stock
Washer Drive Belt – Part Number: 00491680
No Longer Available
Washer Drive Belt
★★★★★
★★★★★
(1)
Part #00491680
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
Sleeve – Part Number: 00422204
No Longer Available
Sleeve
Part #00422204

Common Symptoms of the WFMC530SUC-07

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hinge bracket snapped off
16 of 21 people found this instruction helpful.
  • James from ALEXANDRIA, VA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed washing machine door. Then removed old hinge. Replaced with the new hinge. Replaced door. SPECIAL NOTE: Do not lose white plastic rings that cover hinge nipples on washer. The replacement part does not come with these 4 pieces.
Was this helpful?
Thank you for voting!
We got E13 code, meaning "something" is in the pump--needs clean out. We cleaned out and it worked only once more:( A small plastic peice was cracked and let water and "junk" into the pump--a total loss.
13 of 16 people found this instruction helpful.
  • Sheriann from GLENN, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
My husband took off the back of the washer and disconnected the hose that connected the pump to the main drum. He has strong fingers--did it that way--but really you need a pillars. After putting it all back together we got another weird code--E29 and the door wouldn't lock. But after turning everything off and waiting 30 minutes, the genius machine just suddenly reset itself and started working correctly. No problems since and we've done about 30 loads since then. While on the phone with Bosch, trying to learn how to clear the new code, I heard only, "We only give information to certified repairmen and home repairs are definitely not covered by the warranty." Who cares? I'm now a satisfied mom who is actually washing clothes after only two days waiting for shipping--IF I could get any repairman to my house this month I'd be surprised and not for cheaper than the price of a new washer! Thank you for your great parts:)
Was this helpful?
Thank you for voting!
The inlet valve on my washer was leaking
7 of 7 people found this instruction helpful.
  • Donna from HUNTERSVILLE, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the water to the washer. Took the top off of the washer. Used pliers to loosen the rings holding the hoses to the valve. After the hoses were removed from the valve I popped out the old inlet valve. I put the new inlet valve in place and put the hoses and rings back on. Secured the top of washer back on the washer turned the wa ter back on. No leak present.
Was this helpful?
Thank you for voting!