Part Videos
Replacing your Bosch Washer Cold Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Bosch.
Part# 00422244 replaces these:
AP3758492, 422244
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marc L - 29 days ago
Verified Purchase
Easy repair, great detailed how to video available
Very easy repair
Luke T - February 17, 2024
Verified Purchase
Worked great
Thanks guys. I always use you guys for all my parts
Derek L - June 14, 2023
Verified Purchase
Exactly what I needed
Ordered this replacement part when mine started leaking. Was the exact same part as original and was really easy to replace. Arrived in a couple days and took only a few minutes to change and it was working great again.
Colin M - May 4, 2023
Verified Purchase
Worked perfectly, solved issue
Delivery was extremely quick. The instructional video on the website showed me exactly what I needed to do and was very helpful.
Greg J - October 13, 2022
Verified Purchase
Easy repair works great
Easy to install worked great
Liliane H - September 29, 2020
Verified Purchase
Water inlet valve replacement
The part was in great condition and I received it within 2 days!
Roger R - April 16, 2020
Verified Purchase
Very simple repair with a great video clip to follow.
The part came in 2 days. Worked out great.
Edgar R - October 21, 2019
Verified Purchase
Cold water intake valve
Easy to install. Works well
Pierre B - January 26, 2019
Verified Purchase
Rating 5
The part was good condition and came in time.
Roy H - December 26, 2018
Verified Purchase
Bosch E12 error
part arrive quickly and in perfect condition. PartSelect video made the changeout easy. Thanks
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The inlet valve on my washer was leaking
Turned off the water to the washer. Took the top off of the washer. Used pliers to loosen the rings holding the hoses to the valve. After the hoses were removed from the valve I popped out the old inlet valve. I put the new inlet valve in place and put the hoses and rings back on. Secured the top of washer back on the washer turned the water back on. No leak present.
Other Parts Used:
-
Donna from HUNTERSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
E:12 error code displayed, frequently had to reset washer during cycle
Shut off water supply to washer, unplugged from power. Removed two Torx screws holding the top panel of the washer on (screws are on the back). Slid top back, then lifted up and off. Located cold water inlet valve. Squeezed hose clams with needle nose pliers and slid the two hoses off valve. Disconnected wire harness (look for push tab) from valve. With a little work figured out how to pop valve out of its opening. Installed new valve in its place and re-connected all hookups. Reattached top to washer, plugged and in reconnected water. Ran a test load, then another - no more errors!
Other Parts Used:
-
Ian from HUDSON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The solenoid had sprung a leak
Removed screws from top cover. Slid the cover backs 1/4 inch, and lifted it off. Removed the wire harness by depressing the tab, and pulling it off. Depressed the tab in the back of the water inlet valve, slid it slightly forward and pulled it out. Installed the new part in reverse order.
Other Parts Used:
-
Chris from ATHENS, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Simple
Once you find a T-20 screw driver, it is easy.
Remove top by unscrewing two screws from rear and sliding top back about an inch.
Slide electronic plug out from old unit.
Use pliers to remove two hose clamps. Remove hoses.
Use flat head screwdriver to push old unit to the left when facing back of machine.
Put in new unit. Slide in plug. Reconnect hoses slide clamps back over hoses.
The hardest part was placing the top back on by aligning two tabs and sliding the top back in.
Replace tow screws.
Remove top by unscrewing two screws from rear and sliding top back about an inch.
Slide electronic plug out from old unit.
Use pliers to remove two hose clamps. Remove hoses.
Use flat head screwdriver to push old unit to the left when facing back of machine.
Put in new unit. Slide in plug. Reconnect hoses slide clamps back over hoses.
The hardest part was placing the top back on by aligning two tabs and sliding the top back in.
Replace tow screws.
Other Parts Used:
-
Andrew from WILLISTON PK, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old Cold water inlet valve was leaking
I followed the video and it was an easy repair. I took my time and it was an incredibly simple repair. The new part fit perfectly.
Other Parts Used:
-
Gary from WOODLAND PARK, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christine Hong
September 10, 2019
My Bosch front load washing machine has hot water in but no cold water, please let me know if it is the cold water inlet value problem, and which parts I need to fix the problem? Thanks.
For model number WFMC3301UC/04
Hi Christine,
Thank you for your question. If you are not getting cold water, the issue is likely the cold water inlet valve, part number PS8713229, and it will need to be replaced. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Shellie
July 20, 2017
I'm looking for the wire harness that clips into the valve magnet. If you don't have it , do you know what the part number is for that part?
For model number WFMC3200UC
Hi Shellie, thank you for reaching out. I looked through our inventory and I believe the wire harness you are looking for is part #: PS8713033. I hope this helps you with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
January 31, 2018
Found water leak in family room. Washer is directly above. Discover that the cold water continues to enter the tub after the wash is complete. From what I have read on your site it sounds like my cold water inlet valve needs to be replaced. My question is: How to remove the top of the washer. It is a front load-washer? Thanks Randy
For model number WFMC4301UC
Hi Randy, Thank you for the question. You will need to remove the screws from the back of the appliance to remove the top. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
January 6, 2020
Is the part number for cold water inlet valve ap3758492 or ap3853434 thanks
For model number WFMC5440UC/15
Hello Steve and thank you for writing.
Coldwater inlet valve part number: PS8713229 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 29, 2021
Washer leaking from bottom. How can I troubleshoot if leak is from door gasket or water inlet? Thanks, Mike
For model number WFNC640SUC/01
Hello Michael, thank you for the question. We suggest inspecting the Bellow Seal around the door for damage. You can also tip the appliance back to check the underside for evidence of where the leak is coming from. Check all the hoses for damage and to make sure they are securely installed. We hope this helps!
Was this helpful?
Thank you for voting!
Andrea
April 30, 2018
Hi there, is this cold water inlet valve compatible with model numbers wfmc8400uc/ wfmc8401uc
For model number WFMC8400UC
Hi Andrea,
Thank you for your question. Yes, this water inlet valve will work with both models. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8713229
Manufacturer Part Number: 00422244
Manufacturer Part Number: 00422244
Brand
Model Number
Description