Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Frank S - June 7, 2021
Verified Purchase
Dual Burner not working
Dual Infinity switch fixed the problem I had with the dual burners. The burners work fine now.
★★★★★
★★★★★
Rolf L - May 18, 2021
Verified Purchase
Easy to install fixed my problem
Exactly as the original easy to install.
★★★★★
★★★★★
Mark E - December 27, 2020
Verified Purchase
worked as expected
Part came quickly, appeared to be new, and worked as expected.
★★★★★
★★★★★
Alyre A - May 12, 2020
Verified Purchase
Perfect fit
Fast shipping..professionals..tks
★★★★★
★★★★★
Wayne L - April 3, 2020
Verified Purchase
exact part needed
delivery was fast , part was well packaged and easy to install !
★★★★★
★★★★★
Zenon Y - March 11, 2020
Verified Purchase
Easy Repair, Functions Properly
The original part is not available. This switch worked well with a slight modification. I had to shorten the switch shaft so that the dial fits closer to the panel.
★★★★★
★★★★★
David L - March 5, 2019
Verified Purchase
Easy repair, works great!
Part arrived early then expected, very nicely packaged, all around as good as it gets folks.
★★★★★
★★★★★
Michel R - December 3, 2018
Verified Purchase
Easy repair
The part fit perfectly and was in good order. Works fine. T
★★★★★
★★★★★
Andreas B - September 27, 2018
Verified Purchase
Great part
Exactly what I needed
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
range has inner and outer eye(hot plate) . outer eye would turn wide open and off
ordered switch for on, off. Turned power off at breaker.opened oven door, underneath top console there are four philip screws.. remove top and take slotted screwdriver and unscrew four plastic nuts. I used pocket knife..remove plastic cover , and then remove four more philip screws to remove metal plate that holds all four control switchs. remove two screws that held switch in place and unplug wires and plug new switch in... Saftey first gentlemen, there is no ifs and buts or maybes when it comes to your life.. make sure you turn your power off.. works like a charm , can adjust heat from 1 to hi..thanks for partselect great price and speedy shipping...James K. Luper
Other Parts Used:
James from Kentwood, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
17 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual infinite range switch on left front burner of glass top range would stay on full high no matter what setting was selected on the burner knob.
Remove 4 knobs from front of stove.
Remove plastic nuts that are directly underneath oven knobs. Loosen with plyers and unscrew.
Remove front cover.
Remove 8 screws holding down electrical panel. Remove panel. Remove 2 screws holding switch into place. Transfers wires from old switch to new switch so you hook them up correctly. Then reinstall in reverse order. Job complete in 15 minutes.
Other Parts Used:
Joseph from YOUNGSTOWN, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dual burner would only work on high and only the large burner worked
Replaced the dual infinite switch behind the panel. The wires were easily matched, even though the switch looked a little different. Works perfectly now.
Other Parts Used:
Misty from CUNNINGHAM, TN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michel
September 25, 2019
Which wires to check for continuity on my infinite switch part #318 191 023? My switch have on the back p1 p2 s1 s2 2. The vidéos you are sending me dont have the same letters.
For model number C970 441122
Hello Michel and thank you for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Noel
July 21, 2021
When the dual burner switch is turned-on (even on simmer) on it goes to maximum heat. Is this a sign that the infinite dual switch is faulty?
For model number PLES389DCE
Hi Noel,
Thank you for your question. If you turn the burner on and it goes to high instantly and you have it set to a lower temperature, then there is an issue with the switch and it will need to be replaced. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michel
September 24, 2019
How to check the infinite switch in my stove?
For model number C970441122
Hello Michel, Thank you for the question. You can tests the switch with a multi meter to check for continuity. Hope this helps!
Was this helpful?
Thank you for voting!
Michel
September 24, 2019
Thanks for the part number. I still have a problem with checking the continuity of my infinite switch. On the back of my switch I have p1, p2, s1, s2, 4, 4, and 2, which pin should I touch to check the continuity?
For model number C970 441122
Hi Michel,
Thank you for your question. Here is a link to one of our videos on YouTube that you may use a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. if you feel that this video does not provide you with the information that you need, there are videos on YouTube that you may reference on how to use a multimeter to test an infinite switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Paul
August 30, 2019
Does this part fit our sears Kenmore glass top range? Model # 880.625124p0, serial #rs0711064, type p30. If so, i will order 2 of them. We had both of our dual (hi/lo) burner switches fail. Thanks!
For model number 880.625124P0
Hello Paul, thank you for inquiring. It is not shown as compatible to your model. The replacement for your model is part number PS12349727. Good luck with your repair!
Was this helpful?
Thank you for voting!
Dave
September 25, 2019
Will this part work for our Kenmore range ceramic cook top? Thanks!
For model number C968-68513-1
Hello Dave, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Dave
September 25, 2019
The serial number is tv201875v. It is a Kenmore range made in canada...no mfg. identification?
For model number C968-68513-1
Hello Dave, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Sentri
February 10, 2020
Will this work on a Kenmore 880 6682
For model number Kenmore 880 6682
Hello and thank you for writing.
According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself.
Regretfully, but we cannot find parts or do research on questions without your full model number.
Here is our link to help you find your model number:
https://www.partselect.com/Find-Your-Appliance-Model-Number.aspx
We are looking forward to your response.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
