Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
MACHINE WAS NOT WORKING RIGHT THOUGHT I NEEDED A NEW CONTROL BOARD
Was getting 1E problem and washer was taking forever to do a load. Moved washer away from wall and disconnected hoses, Checked the filters and cold water filter had some junk in it. But the supply 1/4 turn valve from the wall was the problem. It was broken in that the ball valve in it would not turn so the water from the cold side was very limited. Put in new valve and it works fine now.
Other Parts Used:
Robert from ARANSAS PASS, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel Saylor
February 13, 2018
The drain pump does not kick on but we tested the pump and is working. Would the main pcb be bad?
For model number wt1101cw
Hi Samuel,
Thank you for your question. If the drain pump is checking out okay, then the issue could be with the pcb assembly. You will need to test it with a multimeter to see if it is causing the issue. You may also need to check the wiring as well. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
March 27, 2018
Washing machine displayed an ie error code. Hoses, filters, etc... were all checked. currently the machine continues to run even if you turn the power off. i believe it's an electronics problem rather than a plumbing problem. any advise?
For model number WT1101CW
Hello Jason, thank you for your question. The IE code is in reference to a water inlet issue. I would suggest checking the water inlet valve first, as that could be the problem. If the valve is tested and is functioning correctly, the issue may be with the electronic control board or the wire harness that runs from the valve to the board. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
George
February 11, 2018
The pump is continuously running when the washing machine is on and not allowing the tub to fill. The pump is running even without running a cycle. I get error code ie, but it is not an inlet or siphon problem (I have checked both). The pump and filter are clear. Is the most likely broken part the main electronic control board, the pump, or both? Thanks- George
For model number WT1101CW
Hi George, Thank you for the question. If there are no kinks or clogs in the hoses, You will need to check the water pressure going to the appliance. You can also test the valve and the pump with a Multi Meter and check for resistance and continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ben
August 5, 2018
I have an LG top load washing machine. It seems to get stuck in the spin cycle. The water will all be gone but it just continues to spin. A 20 min spin cycle takes an hour or more. Sometimes we have to just turn the machine off to cancel the cycle. Is this most likely a control board issue. Is there other things i should check first.
For model number Wt1101cw
Hi Ben,
Thank you for your question. If the washer is stuck on the spin cycle, the issue is likely with the electronic control board and you will need to check it with a multimeter to verify if it is causing the issue.
I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Arthur
August 21, 2021
Pump not working
For model number WT1101CW
Hello Arthur, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS7785505. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7793330
Manufacturer Part Number: EBR76262102