![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Refrigerator Water Filter Specifications
This is a single OEM water filter used in refrigerators to remove impurities and particles from water that goes through the water and ice dispenser. It is used for reducing cysts, turbidity, lead, mercury, herbicides, and more. If your icemaker is not making ice, not dispensing ice, dispenses too little ice, or there is leakage and the fridge is making loud noises, replacing the water filter may be the solution. This filter is located in the front, top right of side-by-side refrigerators. You will know it is time for a new filter when the light on the freezer door dispenser lights up red, or after 6 months (200 gallons) of use. No tools are required for this easy repair. First, press the release button to pull out the old water filter and push and lock in the new water filter. Run water through the dispenser for about 3 minutes to prime the filter for use. Dispose of the water or use it to water plants. Press the indicator for 3-10 seconds to reset after this repair is complete. This carbon-based filter measures 6 x 3 x 7 Inches and is white plastic. Note: You may also need to order the water filter base to make the water filter fit properly. Please use your model number to locate the filter base.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Refrigerator Water Filter
![Replacing your Frigidaire Refrigerator Refrigerator Water Filter Replacing your Frigidaire Refrigerator Refrigerator Water Filter](https://img.youtube.com/vi/NYcH3h8BWdk/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Ice maker not making ice | Leaking | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Westinghouse, Crosley, Gibson.
Part# WF2CB replaces these:
AP2538969, 868910, WF2CB, 240396401, 240396403, 240396404, 242007901, FC-100, FC100, P240396401, RENEW2CB, WF2CB, WF2CBC
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jane K - 7 days ago
Verified Purchase
Easy to order. Fast shipping.
Received quickly and was easy to replace.
Bonnie B - January 5, 2022
Verified Purchase
Water needed replacing
Part was as expected.
Richard K - July 23, 2021
Verified Purchase
Air & Water filters
Please to report customer service was helpful & professional. I received the ordered parts quickly and in good condition. Happy to recommend the services provided through Part Select. Richard Kennedy
JOHN F - July 16, 2021
Verified Purchase
Part fit as expected simple installation
Nice replacement filter
Bonnie B - April 14, 2020
Verified Purchase
Easy repair.
Part arrived on time. Thanks
Heather P - April 8, 2020
Verified Purchase
Worked as expected
What expected
Gina K - December 12, 2019
Verified Purchase
Super Simple Repair
The part came fast and was exactly as it was described. Very simple to pop out the old filter and push in the new one, run the water for 3 minutes to clear any impurities and done!
Bonnie B - October 9, 2019
Verified Purchase
Easy repair.
Easy to replace. Thanks.
Mamun C - May 17, 2019
Verified Purchase
Refrigerator water / ice filter
Quick delivery and really easy to install. The old filter was transparent so you could see and monitor what was happening and when it needed to be changed. The new filter is not transparent so I’ll have to guess when to change it. Transparency is always best. Also, my water is no longer cold with the new filter. I put the old filter back in and the water was cold. Guess I’ll have to use the ice. Not the same !!!
JOYCE H - May 14, 2019
Verified Purchase
Too easy!
This is the third time I've ordered parts my refrigerator and I have been very pleased with the prompt delivery and the wonderful videos that show you how to install.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 49 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
yearly maintenance
swap filter
Other Parts Used:
-
Antonio from Folsom, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
619 of 659 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced door shelve
We live in rural SW Missouri, so I am very dependent on the internet. I found PartSelect on a Google search and simply inputted the modle number and serial number for the refrigerator and there it was. I was able to order the right part the first time and repair the refrigerator myself! No serviceman needed here!
Other Parts Used:
-
TERRI from STOCKTON, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
482 of 570 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
easily found the part I was looking for
The website was easy to navigate. Loved the schematic drawings of the appliance, it made it easy to find the part you are looking for without the guesswork (part names are sometimes not intuitive). My parts arrived promptly, the price was competitive, everything fit beautifly as expected. Would recommend this merchant, will shop there again. THANKS !
Other Parts Used:
-
ARLENA from MANASSAS PARK, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
380 of 605 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice-Maker and Water Dispenser not working.
First I disconnected the power cord, then removed the screws that held the bracket that holds the base for the water-filer in place. I then disconnected the water lines(intake and outflow). Next I removed the screws that held the water-filter's base in place. I then disconnected the release lock mechanism for the filter and finally removed the water-filter base. I did the reverse to install the new water-filter base. Previously I had tested the intake water line and noticed the water was flowing with enough pressure upto the water-filter's base but no water was exiting thru the outflow line, which leads to the Ice-Maker and Dispenser. I had tried changing the filter but that didn't solve the problem it was then I had realized that the Base was the problem. The actual problem was the spring-loaded valves for both the intake and outflow lines, which had a plastic prong that protrudes out of the base that is triggered by the filter when installed. The two prongs were worn-down so the filter wasn't activating the spring-loaded release valve to let the water thru. As for the light, I just unscrewed it.
Other Parts Used:
-
Colin from Hollis, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set, Wrench set
180 of 291 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refridgerator too cold adjustment no good.
First I replaced the Defrost Thermostat on the coil and this did not fix the problem. So I ordered this new ADC (Adaptive Defrost Control)board.
It is not identical to the first ADC board and at least one feature the old ADC did was deleted from the function of the Fridge. Not sure why?
Because the board were different a new wiring harness was provided.
Step 1. Unplug the unit and remove the water filter.
Step 2. Remove the covers off of the unit on the top of the fridge using the 1/4" nut driver and a 1/4" deep well socket with extension for the deeper inset fasteners. This exposes the wiring harness and the ADC board as well as the temperature controls.
step 3. Remove the screws for the ADC on the cover and remove the wiring harness from it. No need to note the wire's positions as the new ADC uses a different connector.
step 4. As you remove each connection of the wire harness from the unit replace that connection with then new harness connector to eliminate any confusion. Do each one. One by one until the old harness is completely loose and the new harness is completely installed.
step 5. Install new ADC which in my case was now enclosed in an orange case. Unlike the one I removed that was and open pcb.
Step 6. Replace covers using the 1/4" nut driver and 1/4" wrench.
Step 7. Replace filter and plug in unit.
Apparently there have been 4 versions of this ADC board through the years. My fridge was built in 2003 not long before I bought it.
It is not identical to the first ADC board and at least one feature the old ADC did was deleted from the function of the Fridge. Not sure why?
Because the board were different a new wiring harness was provided.
Step 1. Unplug the unit and remove the water filter.
Step 2. Remove the covers off of the unit on the top of the fridge using the 1/4" nut driver and a 1/4" deep well socket with extension for the deeper inset fasteners. This exposes the wiring harness and the ADC board as well as the temperature controls.
step 3. Remove the screws for the ADC on the cover and remove the wiring harness from it. No need to note the wire's positions as the new ADC uses a different connector.
step 4. As you remove each connection of the wire harness from the unit replace that connection with then new harness connector to eliminate any confusion. Do each one. One by one until the old harness is completely loose and the new harness is completely installed.
step 5. Install new ADC which in my case was now enclosed in an orange case. Unlike the one I removed that was and open pcb.
Step 6. Replace covers using the 1/4" nut driver and 1/4" wrench.
Step 7. Replace filter and plug in unit.
Apparently there have been 4 versions of this ADC board through the years. My fridge was built in 2003 not long before I bought it.
Other Parts Used:
-
Jack from Manteca, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
179 of 274 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking(pouring) from the filter into the refrigerator
Pushed the button on the filter in the fridge, the cartridge popped out and in with the new. That simple. Prior to replacement the water was leaking, although it was still producing water and ice through the door. When the filter was out, no leaks, but no water and ice! Just needed a new filter.
Other Parts Used:
-
Michele from Red Oak, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
88 of 100 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Interior light was on "red" indicating a water filter change was needed.
Just pushed the button along side the filter and it popped out in my hand. I unpacked the new filter module and inserted it. It was necessary to run water through the dispenser for a couple of minutes to purge the air and clear the lines. The modular filter assembly is more expenseve than some but the ease of replacement makes the cost a good value.
Other Parts Used:
-
Tom from Simpsonville, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter neeed replacement
Just opened the filter storage and popped out the old one and put in the new one. Ran the system for three minutes according to directions and it worked fine.
Other Parts Used:
-
Nancy from Lawrenceville, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from water filter base.
Tried replacing water filter first. It stilled leaked, so I removed the covers to gain access to the water filter base. After cutting the two hoses to remove the old base, I simply slid the hoses into the new base, screwed it into place, replaced the covers, and then reinstalled the new water filter. No more leak!
Other Parts Used:
-
Dale from Fort Myers, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Wrench set
19 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water filter needed replacement
Once I recieved the new filter, I enthusiastically opened the box, removed the filter from it's packaging and set it aside for quick access. I opened the refrigerator door, pushed the release button on the old filter and pulled it out. I then tossed the old filter in the trash.
Once that was done, I removed the 2 rubber caps covering the inlet and outlets on the new filter. Then, with ace precision, I guided the new filter back into the slot until it clicked. I ran the water for 3 minutes as the instructions suggested, then, had a glass of water.
Mission accomplished and it went off without a single hitch!
Glenn Walker, Simi Valley, Ca
Once that was done, I removed the 2 rubber caps covering the inlet and outlets on the new filter. Then, with ace precision, I guided the new filter back into the slot until it clicked. I ran the water for 3 minutes as the instructions suggested, then, had a glass of water.
Mission accomplished and it went off without a single hitch!
Glenn Walker, Simi Valley, Ca
Other Parts Used:
-
Glenn from Simi Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
January 10, 2018
I have a Frigidaire refrigerator the water filter pops out after a few mins. We installed the filter nine months ago does this mean we need to replace the filter?
For model number Wf2cd
HI Michael,
Thank you for your question. A filter should be replaced every 6 months. If the filter was installed nine months ago, you will need to replace it. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Connell
December 27, 2017
I am trying to assist my son-in-law in replacing his refrigerator water filter. He indicated that the filter was working fine without leaking until he installed the replacement filter (crystala filter #cf2). The replacement filter appears to be the right one for the refrigerator, and it is a simple task, but i am also experiencing a leak when i put in the replacement filter. Unfortunately, i don't have the old filter, so i cannot compare it to the new filter he purchased. Would you have any suggestions what could be causing the problem?
For model number GLRS237ZAB7
Hi Connell,
Thank you for your question. It is likely the generic filter is just not correct for the appliance. This can sometimes happen with generic filters. I would suggest replacing it with an OEM filter, which is the part that you are inquiring on. I hope that helps. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Sandy
January 10, 2018
Put new filter inside just like other times but this time reset button will not stay on. I tried 2 different filters but the Green reset light will not stay on.
For model number GLHS36EEW0
Hi Sandy, Thank you for the question. You may need to reset the light.Press and Hold the Reset Button Until the Indicator Light Flashes and resets. Next flush a couple of gallons of water through your new filter. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
March 6, 2020
I can't find this filter can you help me?????
For model number frs23hasb9
Hello Patricia, thank you for your question. The filter for this unit is PartSelect Number: PS503621. Please enter the part number into the site for current price and availability and to order. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debra
May 2, 2019
Water drips heavily from the section under where the water filter is. We have to keep a little container to catch the water.
For model number GLRS264ZAB5
Hello Debra, thank you for inquiring. For this symptom you will want to replace either the Water Filter part PS503621, the Water Inlet Valve part PS7784018, or the Water Filter Base part PS976499. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debra
May 3, 2019
To change the water filter; it does not pop out easily; do we need to apply force or do we need to unscrew the 2 screws in that area; the water filter has never been changed. Thank you. I will order the water filter replacement cartridge.
For model number glrs264zab5
Hello Debra, Thank you for the question. Here is a link for the How To Video. Hope this helps!
https://www.youtube.com/watch?v=NYcH3h8BWdk
![](https://img.youtube.com/vi/NYcH3h8BWdk/maxresdefault.jpg)
1 person found this helpful.
Was this helpful?
Thank you for voting!
Milton
January 3, 2023
My water filter will not lock in place once I tried to replace it with a new one. (Frigidaire pure source). WF2CB
For model number 253.253.52649301
Hello Milton, thank you for reaching out. We have attached an installation video of the Water Filter to help you out. If the water filter is still not locking, we would suggest checking the Water Filter Base, part number PS976499. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
![](https://img.youtube.com/vi/NYcH3h8BWdk/maxresdefault.jpg)
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Don
August 15, 2023
Why does water exit spigot when icemaker is calling for water?I changed out the valve with new
For model number PLHS268ZCB1
Hello Don, thank you for reaching out. If the water tube to the ice maker is misaligned or blocked, water may not be able to flow into the ice maker. This will eventually cause water to leak. We would recommend checking it, the part number is PS7783975. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
John
December 4, 2019
Water filter pn # 241968501 replacement please?
Hello John and thanks for writing.
Water filter # PS503621, we would need your model number to make sure this is the right one for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Terri
December 13, 2019
The new water filter fits perfect but the “changed filter light” will not go off. We have run about 2 gallons of water through it. Also the old filter has a number on it js1052g04341 on it but the new number has a different number. Can you advise what to do?
For model number WF2CB Pure Source
Hello Terri, thank you for contacting us. Try pressing and holding the Reset Button Until the Indicator Light Flashes and resets. Next flush a couple of gallons of water through your new filter. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS503621
Manufacturer Part Number: WF2CB
Manufacturer Part Number: WF2CB
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)