Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian S - March 23, 2024
Verified Purchase
Easy repair, quick delivery
Great condition, wasn’t the problem but a good start for troubleshooting. Not expensive.
★★★★★
★★★★★
John H - November 2, 2022
Verified Purchase
Part was perfect fit
Worked perfectly, no problem to install
★★★★★
★★★★★
Raphael B - August 13, 2022
Verified Purchase
Super easy to do, and it worked!
I was a bit doubtful that this would fix the clock/timer and the controls (so also the oven), but it did! Very easy repair, parts came quickly, vid easy to follow! Thank you.
★★★★★
★★★★★
Claude L - April 7, 2022
Verified Purchase
Terminal block not the problem
Replaced the terminal block and the temperature sensor on 15 year old Frigidaire Gallery fridge which were not the problem. The next parts being very expensive, I scrapped the fridge and bought a Whirlpool model.
★★★★★
★★★★★
Matt R - February 3, 2021
Verified Purchase
Easy install
After my research, this part didn't fix my problem.
★★★★★
★★★★★
Cynthia B - February 20, 2020
Verified Purchase
Easy to install
The part did not fix oven temperature. We had to order the oven control board which was the problem as we suspected.
★★★★★
★★★★★
Calvin T - October 25, 2019
Verified Purchase
For Frigidaire Stove
Part in great condition came fast seems to have solved problem. Thanks.
★★★★★
★★★★★
Sylvain R - April 29, 2019
Verified Purchase
Did not fix my issue
Useless purchase...
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Other Parts Used:
Timothy from Spring Valley, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
101 of 160 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The elements were not heating up
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Other Parts Used:
Tanya from KALISPELL, MT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely. Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Other Parts Used:
Daniel from Falmouth, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat after running self clean
Googled the problem and found Oven Temperature Sensor and Main Terminal Block to be the most likely problems. Turned out to be neither. No parts were needed. Oven has a thermal overload switch on the rear upper left. Thermal overload needed re-set. To do so you have to remove the oven, remove the back and press the red button on thermal overload. Biggest challenge was figuring out how to remove the oven. Even with the installation manual it was not easy to fgure out. The instructions are misleading. You need a special tool. I used two hacksaw blades as a substitute, and slid them in to release the clips. Once you figure out how to get the oven out the rest is simple.
my original part arrived and it did not fit. When I called to explain the problem I was told it was the wrong part. The big problem is... Frigidaire calls the receptacle a terminal block kit as well as a terminal block kit which is a totally different part. I tried to explain that to several different folks I spoke to at your company as well as Frigidaire but I'm not sure if I got that point across. Take a look at part # 530 393 5058 and part # 530 440 9888 and you will see that they both mention terminal block kit. Hopefully the part I am getting from Frigidaire is an OEM part and will fit.
Other Parts Used:
Barbara from WICKENBURG, AZ
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old terminal block was melted
removed back panel on range, removed old terminal block installed new terminal block, replaced back panel cover.
Watching the video showed an easy, unscrew and screw back on process while connecting the wires back. It was really that simple. Once it was complete (not even 10mins), plugged it back in, and its been working great since.
Other Parts Used:
Tony from Hartford, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control will not work - only clock blinks
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Other Parts Used:
Sue from Lampasas, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
0 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
58 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
October 8, 2017
The range top and the oven will not heat. Control board is not displaying error code.
For model number PLEFZ398ECF
Hi Joe,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the oven temperature probe, the main terminal block and the bake element. I hope this helps. Thank you and have a great day!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Andrea
October 17, 2017
I was wondering, I cant get my oven working, I push bake and the temp I need and it makes a clicking sound like its working but the element wont heat. So I replaced that and now it comes on but only if I push time cook and then it will heat up for a couple minutes then shut off. I am confused on whats wrong with it now.Can you help? I don't know how to get it working right.
For model number FEF368GQA
Hi Andrea, Thank you for the question. It sounds like when the element burnt out it may have shorted the Electronic Clock/Timer,PartSelect Number PS2581862.This part controls certain functions of your appliance such as bake, broil and the time.Hope this helps!
Both elements stopped functioning: Control panel works but elements are either not being energized or are faulty. Examined the terminal block which looks brand new. Oven is not very old and has been working perfectly until now. Breaker reset has not corrected it.Other possible culprits: Thermostat? Oven is second unit: Ie lightly used since new. Seems odd both elements fail at once however. Thanks. Kim
For model number FEB24S5AQC wall oven
Hi Kim,
Thank you for your question. If both elements in the oven are not working, it is likely the temperature sensor, but you will also need to check the electronic control board and the wiring between the electronic control board and the sensor. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
January 7, 2018
My oven element will not heat. Broiler works just fine. Tested the temp sensor and it reads good. Replaced the oven element and same issue. Any suggestions from here?
For model number PLES389ECE
Hello Randy, Thank you for your inquiry. I would check the terminal block, the thermostats, the wiring harness that connects the element and the main control board. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Hank
May 1, 2018
Turn bake on set oven temperature to 400. It takes an hour to preheat. Preheat light goes out and beep sounds. I placed an additional thermostat inside oven. Temperature only reaches 350. Then the temperature starts to drop in one hour after pre-heat light goes off temperature drops to 175.
For model number FFEW3025PSB
Hello Hank, thank you for your question. It sounds like the temperature sensor is gone in your appliance. The sensor measures the temperature in the oven and relays it to the board. You will want to replace the Temperature Sensor Part Number 5304504897. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lynn
January 24, 2019
Hi, broil element will not heat; multi meter reading seems to be ok (about 17-19). No codes on display, bake element seems to be fine. Can you give me any direction? Thank you.
For model number FEB 27S5 ABB
Hello Lynn, thank you for your question. If your element is reading between 0 - 50 ohms, then your broil element has continuity and has not failed. We would recommend testing the sensor, part number PartSelect Number: PS820208. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If this test passes, the issue is the electronic control board Part Number: PS440928, which has been discontinued by the manufacturer and is no longer available. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
August 6, 2018
How do i install the main terminal block kit?
For model number GLEB30S8CSA
Hi Joseph,
Thank you for your question. There is a video listed with the part on our website that you referenced in your question to us that you may view on how to install it. You will find it listed under the photo on the webpage for the terminal block. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
July 16, 2019
All touch operations work the top range works ,the lights. And the auto-clean function works,however the oven does not come on to preheat.
For model number FEF377CFTD
Hello Peter, thank you for writing. For this symptom you will want to consider either the Oven Probe part PS10057397 or this Main Terminal Block part PS471605 for your model. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sonny
August 3, 2018
Oven overheats and didnt turn off whencontrol was turned to off position.
For model number FeF332BAWG
Hello Sonny, thank you for your question. If the control knob was turned to the off position and the oven didn't turn off you will want to replace the oven thermostat and sensor, part number PS437311. This will also fix the issue with the oven getting too hot. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
January 14, 2019
Curious as to what part I should check first, oven, cooktop, front panel all stopped working completely. It has power, but nothing works.Thanks much
For model number PLES389ECD
Hello Rick, Thank you for the question. If there is power getting to the appliance but it is not powering on, you may need to replace the board, Part Number: PS1149757. Before replacing the board you can check the wire harness plugged into the board and the wiring from the terminal block. Hope this helps, good luck with this repair!
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS471605
Manufacturer Part Number: 5304409888
