Oven Electronic Control Board 5304509493

Hello Joe, thank you for your question. It sounds like the oven control board, Part #: PS12114577, has failed. We would recommend replacing that part. Good luck with your repair!

Mustapha, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. Good luck with your repair.

Hello Trudy, thank you for your question. Yes, the board would be the most likely issue. If the broil works, but the broil is not heating to temp and that element has been replaced, the board should be replaced. I hope this helps.

Hello Lorraine, thank you for your question. Yes, this is the exact replacement part for that original control board. I hope this helps!

Hi Virgil, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.

Hello Lonee, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

Hello Heather, Thank you for the question. The F13 and F11 Error codes will indicate the Control Board PartSelect Number PS2581862 is defective and will need to be replaced. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!

Hi David, Thank you for your question. The electronic control board listed for your model, part number 316557100, has been discontinued by Frigidaire and you will need to contact them to see if they have information on a replacement. If they provide you with a part number for a replacement electronic control board, you may call us back with it and we will verify if we have it available for you. If you have any questions, please let us know.

Hello Jacinta, Thank you for the question. If you mean when you press Bake you hear the beep but it is not beeping at all times, you may have a defective oven control board, PartSelect Number PS2581942. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Hello Nazira, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS438114. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!