Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was leaking out of small gold nut
The nut was split down one side, so I first tried to sauder the nut back together. Saudering never goes well for me anyway, but I couldn't get a good enough seal around the nut to make it fit tightly. Then I had to cut off the clear plastic shield to get down in there, just before realizing you could just pull the white wire firmly and it would come loose from the nut. All I had to do then was unscrew the original nut, and screw on the new nut. Then, luckily I had mistakenly ordered an extra clear plastic shield and could replace the one I had previously cut. Dishwasher now runs like a charm!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Curtis
April 30, 2018
What is the difference between splash shield part #154289801 and splash shield part #154798401? My dishwasher never had these splash shields so should I add them?
For model number LGBD2432LW0A
Hi Curtis, Thank you for the question. The Splash Shield 154289801 is for the nut around the element and the 154798401 if for the soap dispenser. If you do not have them, I suggest ordering them and installing them. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Diana
June 30, 2021
My rinse aid dispenser cap fell off during the wash cycle & melted. I need to get a replacement. Can not find one on your site. Can you please tell me the part number I need to purchase? Thank you.
For model number FGHD2465NF1A
Hello Diana, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS421128 for the White Cap. If you wish to replace the cap with the Grey one, you will need to order and replace the Full Soap Dispenser. We hope this helps, good luck with this repair!
This part is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher and is located on the bottom of the dishwasher.
Grommets are included with this ...
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.
NOTE: Brass ...
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing water leaking out. If br...
