Part Location Diagram of 5304506521 Frigidaire Detergent Dispenser
See part 17 in the diagram
Replacing your Frigidaire Dishwasher Detergent Dispenser
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Detergent Dispenser

★★★★★
★★★★★
6 Reviews
$107.65
  In Stock
PartSelect Number PS11770487
Manufacturer Part Number 5304506521
Manufactured by Frigidaire
Product Description

Detergent Dispenser Specifications

This is the replacement detergent dispenser for your refrigerator. It is gray in color and is sold individually. It is approximately 8.5 inches long and 3 inches wide. The detergent dispenser stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dishwasher Detergent Dispenser

Replacing your Frigidaire Dishwasher Detergent Dispenser
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Not cleaning dishes properly | Door latch failure | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Crosley, Kenmore, Westinghouse.
Part# 5304506521 replaces these:
AP6036339, 154379201, 154379202, 154452703, 154542103, 154860101, 154860102, 5304452518
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
5.0
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water pump went up, soap dispenser wouldn't close and a little rust on the lower rack.
Easy repair. pulled dishwasher out, disconnected electrical wire for safety but don't think it was required since the breaker was off (turn it on and flip the breaker for verification). Pulling the pump and replacing was easy, soap dispenser, same, easy. First time I ever worked on a dishwasher, simple. Parts were all OEM parts and most importantly were the correct parts I needed. Way cheaper than replacing the unit and I saved $150 on an hours worth of work vice paying the service guy.
Other Parts Used:
RACK ASSEMBLY,LOWER,GREY Pump Motor Kit
  • Lee from WILMINGTON, DE
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
7 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The soap dispenser didn’t dispense the soap
After shutting off power to the dishwasher, I removed the two screws holding the door cover on the inside of the door sides, about 8 inches from the bottom of the door. I slid the cover down and off, and unplugged the wires to the dispenser. Then I removed the six screws holding the dispenser in place, removed the old dispenser, installed the new one, replaced the six screws and plugged the wires back in. The door cover and the two screws was all that was left. It took about ten minutes. Easy.
Other Parts Used:
  • Bernard from ACUSHNET, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaked spot free fluid
Replaced part
Other Parts Used:
  • Tim from MARINE ST CRX, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making noise during operation.
Checked your videos and found the lower spray arm damaged (nubs worn down). Previous owner had some work done and didn't reinstall the parts properly. While during the repair, I also decided to replace the Detergent Dispenser and make a new spray shield. I guess the previous owner decided one wasn't needed.

Easy install, no noise.

Capt. Hank
Other Parts Used:
Lower Spray Arm Support
  • Hank from Fort Pierce, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser failed to operate
Uncomplicated repair. Remove door, remove old dispenser, install new dispenser.
Other Parts Used:
  • GENE from BRONX, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plug for soap dispenser.
My future son in law did it. Looked at instructions on the app for the part. Didn't take very long.
Other Parts Used:
  • Janice from ELK GROVE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
September 21, 2017
Had repair man order dispenser for Electrolux dishwasher. He installed it. First wash the new dispenser didn't release the soap (finish). Try a second time it still didn't work. What do i do
PartSelect logo
Hi Linda, Thank you for your inquiry. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. The rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. If your dishwasher is not dispensing detergent, the spring and hinge pin on the dispenser door could be the problem. The dispenser door is spring loaded, and is held in the closed position by a catch. Check that the spring and pin are not bent or broken and replace if required. If the catch is not releasing the door, then you should inspect the timer, the bi-metal release or the wax motor. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Lydia
December 14, 2021
Can I buy a replacement rinse aid cap? I don't see it listed separately.
For model number FGID2466QF5A
PartSelect logo
Hello Lydia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS421128. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Sharon
January 12, 2022
I only need the rinse dispenser lid that I forgot to put on and melted it can I buy this by itself
For model number FFCD2413UW2A
PartSelect logo
Hello Sharon, thank you for your question. No, the Detergent Dispenser is only sold as a complete assembly. The part is PartSelect Number PS11770487. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Janet
January 12, 2020
Bought home installed dishwasher that the previous owners had but not installed use liquid detergent and dispenser has never opened during cycle frustrated
For model number FFBD2406NS9B
PartSelect logo
Hello Janet and thank you for writing. It certainly sounds like it could be a faulty dispenser PS11770487, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joseph
February 26, 2020
I have the new detergent dispenser. How do i replace it.
For model number FGHD2465NF1A
PartSelect logo
Hello Joseph, Thank you for your question. Remove outer door panel on with by unscrewing two bottom screws after opening the dishwasher door. Then close the door while holding the outer panel so it doesn't fall and remove the outer panel so you can access the back of the dispenser. Remove the cable and screws attaching the original dispenser into place, then install the new dispenser by repeating the steps backwards. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Randy
April 29, 2023
Is rinse aid cap available in parts
For model number Ffcd2418us1a
PartSelect logo
Hello Randy, Thank you for your inquiry. According to the manufacturer, the white cap, part# PS421128, will fit this dispenser. The grey cap is only available as part of the dispenser. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Nick
March 15, 2018
I ran my dishwasher 3 times. All 3 times after cycle the dispenser door was open and the soap pod was laying in the bottom of the unit still in tact. Obviously dishes did not wash. It seems the dispenser is not opening until the end of the cycle seeing how the soap pod is not dissolved. Any suggestions?
For model number ffbd2406nboa
PartSelect logo
Hi Nick, Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. The rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping. Also, if the water is not hot enough, this can cause the dishwasher not to clean the dishes properly. Turn the hot water tap on at the sink before starting the dishwasher and let it run for awhile. Once it is hot enough, start the dishwasher. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Dave
November 8, 2019
Hi just brought the detergent dispenser replaced it but still dose not open I try a wash empty but still did not pop open do i need to replace the control board or the control assembly should I replace the both at the same time not sure want to do how dose the dispenser open is the control board that tells it to open at a sarton time or heat from the dishwasher it dose get hot any help would be great thanks dave
For model number FFBD2409LW0A
PartSelect logo
Hi Dave, it is hard to say, do you have any other symptoms? Perhaps the dispenser is stuck, or faulty, if there are no other symptoms than replacing the detergent dispenser may the correct course of action. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Eugene
November 7, 2022
Hello. Is it possible to just buy the twist off cap on the rinse aid dispenser? Mine fell off during use was burned and leaks. Thank you for your help!
For model number FFCD2413US2A
PartSelect logo
Hello Eugene, thank you for reaching out. Unfortunately, the cap comes as a part of the detergent dispenser assembly, part number PS1177048, and is not sold individually. If you require assistance to place an order, please get in touch with customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Tommy
December 16, 2022
I am needing just the rinse cap, not the whole assembly
For model number LFID2426TF2A
PartSelect logo
Hello Tommy, thank you for your question. Unfortunately, the cap comes as a part of the detergent dispenser assembly, part number PS11770487 and is not sold individually. Good luck with this repair.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770487
Manufacturer Part Number: 5304506521
Brand
Model Number
Description
Frigidaire
004621710A
Dishwasher - Dishwasher
Frigidaire
004621711A
Dishwasher - Dishwasher
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Kenmore
58714012412B
Dishwasher - DISHWASHER
Kenmore
58714012413B
Dishwasher - DISHWASHER
Kenmore
58714012414B
Dishwasher - DISHWASHER
Kenmore
58714012415B
Dishwasher - Kenmore 58714012415b Dishwasher
Kenmore
58714012416B
Dishwasher - Dishwasher
Kenmore
58714013410B
Dishwasher - DISHWASHER
Kenmore
58714013411B
Dishwasher - DISHWASHER
Kenmore
58714013412B
Dishwasher - DISHWASHER
Kenmore
58714013413B
Dishwasher - DISHWASHER
Kenmore
58714013414B
Dishwasher - DISHWASHER
Kenmore
58714013415B
Dishwasher - DISHWASHER
Kenmore
58714013416B
Dishwasher - Dishwasher
Kenmore
58714013417B
Dishwasher - Kenmore Dishwasher 58714013417b
Kenmore
58714014409B
Dishwasher - DISHWASHER
Kenmore
58714014410B
Dishwasher - DISHWASHER
Kenmore
58714014411B
Dishwasher - DISHWASHER
Kenmore
58714014412B
Dishwasher - DISHWASHER
Kenmore
58714014413B
Dishwasher - DISHWASHER
Kenmore
58714019409B
Dishwasher - DISHWASHER
Kenmore
58714019410B
Dishwasher - DISHWASHER
Kenmore
58714019411B
Dishwasher - DISHWASHER
Kenmore
58714019412B
Dishwasher - DISHWASHER
Kenmore
58714019413B
Dishwasher - DISHWASHER
Kenmore
58714019414B
Dishwasher - DISHWASHER
Kenmore
58714019415B
Dishwasher - Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service