Micro Switch 3405-001033

Official part for Samsung, Maytag, Amana, Jenn-Air

Easy 

30 - 60 mins 

Part Location Diagram of 3405-001033 Samsung Micro Switch
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Proudly Canadian
$22.80
In Stock
Order within the next 3 hrs and your part ships today!

Part Fit Check - Make Sure it's a Match.

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Part #3405-001033
Manufactured by Samsung for Samsung, Maytag, Amana, Jenn-Air

You May Also Need

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

What this part fixes:
  • Won’t turn on
Works with the following products:
  • Microwave
  • Microwave Oven Combo
Part# 3405-001033 replaces these:
3405-000176, 3405-001033, DE34-20017A, DE34-20018A, DE34-20019A

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 5 real customers like you

Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Microwave would not start when door closed. Sometimes you could push in or jiggle door and it would work for awhile and then it woud stop again. I knew it eas a door switch issue but wasn't certain which of the 3 or the body latch itself.
19 of 34 people found this instruction helpful.
  • Lynn from LOUISVILLE, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the body latch assembly and found the bottom micro switch (NC) terminal burnt and loose. I replaced and working perfectly fine now. Easy diagnose and easy repair.
Was this helpful?
Thank you for voting!
microwave ran with the door open
10 of 15 people found this instruction helpful.
  • david from WASHINGTON, DC
  • Easy
  • 30 - 60 mins
  • Screw drivers
First I read through the customer comments, reviews, questions, etc. at Parts Select, which is always a good bet. Then I put "samsung microwave door switch replacement" into youtube and watched some videos. They don't even have to be for Samsung. From what I can tell, many of the appliance companies use the same design and the same junk parts, so watching a GE video is almost the same for example. Watch some videos to familiarize yourself with the steps. There are maybe six to disassemble and install the new part. I replaced all three switches. They are not expensive and to replace 3 is only 5% more work than to replace just one; you have to take the microwave apart in either case. UNPLUG THE MICROWAVE FROM THE WALL. Start taking it apart. I use my phone to take a picture of any thing I remove, unscrew or disconnect, especially wires, BEFORE I disconnect them. Thee pictures serve as a reference when I go to reconnect and reassemble. If I am uncertain then I check the picture. Good luck!
Was this helpful?
Thank you for voting!
Our microwave would turn on after the timer was set but only the light would turn on, nothing else.
5 of 5 people found this instruction helpful.
  • Adam from GILBERTS, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I replaced all 3 door switches. Once you remove the top vent then remove the panel. Then remove the two screws holding the door switches in place and pop them out and replace them. It was tricky getting around all the wires but eventually was able to get around them. Took less than 20 mins to do and was less than $40 to fix. Much better than having to replace our over the stove microwave.
Was this helpful?
Thank you for voting!
Turntable started turn when door opened, then unit wouldn't run when start was pressed
5 of 6 people found this instruction helpful.
  • Phil from RALEIGH, NC
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Unplugged the unit. With a screwdriver removed two screws on the top plastic vent. This exposed the screw holding the control panel. Removed that screw to access the switches. Removed the visible connected wiring from the switches. Grabbed each switch with pliers to gentle pull them from their holders. Inserted new switches and reconnected wiring, ensuring the correct orientation of switches in their holders.
Recommend replace all three switches.
Was this helpful?
Thank you for voting!
Micro kept running when the door opened.......NOT GOOD
3 of 3 people found this instruction helpful.
  • Paul from Shelton, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers
After minimum research, it was identified as a micro switch in the door. There is a total of 3, The top and bottom switches are the same in the odd one is in the middle just above the lower switch. Problem i had was one of the you tube videos said to grab the switches with pliers and force them out.;not a good idea. it breaks the lever in the switch holder bar. Solution is to remove the plastic switch holder bar from the door frame removing the 2 screws on the inside of the frame and then you can flip the lever in the bar which secures the switches on the door side. Use a small screwdriver to release the lever and they will slide right out. FYI the plastic switch holder bar is no longer available. I used electrical tape to secure my switches since the levers were broken from forcing them out.

Good Luck
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

1 question answered by our Repair Experts.

Ask our experts a question about this part and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert - For model number ME18H704SFS
July 12, 2021
When you close the door to start the microwave, is there a upper and a lower micro switch?
Chris Boyle Profile
Hello Robert, Thank you for the question. There are three switches for this model. The Upper and Lower Switch is Part #: PS4131192 and the Middle Switch is Part #: PS4131191. We hope this helps!
$19.32
In Stock
Micro Door Switch
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #3405-001033
Brand
Model Number
Description
Samsung
191D2357G013
Microwave Oven Combo - Samsung Oven/Microwave Combo Model 191D2357G013 Parts
Samsung
191D2357G014
Microwave Oven Combo - Samsung Oven/Microwave Combo Model 191D2357G014 Parts
Kenmore
40139030
Upright Vacuum - VACUUM
Samsung
40139035
Upright Vacuum - Upright Vacuum
Kenmore
40180082010
Microwave - MICROWAVE
Kenmore
40180082700
Microwave - MICROWAVE
Kenmore
40180083700
Microwave - MICROWAVE
Kenmore
40180084700
Microwave - MICROWAVE
Kenmore
40180086700
Microwave - MICROWAVE
Kenmore
40180089700
Microwave - MICROWAVE
Kenmore
40180092010
Microwave - MICROWAVE
Kenmore
40180092700
Microwave - MICROWAVE
Kenmore
40180093010
Microwave - MICROWAVE
Kenmore
40180093700
Microwave - MICROWAVE
Kenmore
40180094700
Microwave - MICROWAVE
Kenmore
40180099010
Microwave - MICROWAVE
Kenmore
40180099700
Microwave - MICROWAVE
Kenmore
40185042010
Microwave - MICROWAVE OVEN
Kenmore
40185042210
Microwave - MICROWAVE OVEN
Kenmore
40185042310
Microwave - MICROWAVE/HOOD COMBO
Kenmore
40185043010
Microwave - MICROWAVE OVEN
Kenmore
40185043210
Microwave - MICROWAVE
Kenmore
40185043310
Microwave - MICROWAVE HOOD COMBO
Kenmore
40185044010
Microwave - MICROWAVE OVEN
Kenmore
40185044110
Microwave - MICROWAVE
Kenmore
40185044210
Microwave - MICROWAVE
Kenmore
40185046010
Microwave - MICROWAVE OVEN
Kenmore
40185046210
Microwave - MICROWAVE
Kenmore
40185049010
Microwave - MICROWAVE OVEN
Kenmore
40185049210
Microwave - MICROWAVE