This part is the replacement flat bolt for your microwave. It is a Phillips-head screw, which is approximately 4 inches long. The main reason to replace this bolt is if your current bolt is stripped, damaged, or missing. This part is an authentic OEM part sourced from the manufacturer and is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris - For model number 40180083700
July 28, 2021
When we closed the door the light stays on and there some motor noise that starts. The door open the light is on no motor noise. The microwave will work if I set the timer to cook and the plate will spin. The fan works with the buttons and the noise is still there while they are running. Unplug for a day and same thing when plug back in.
Hello Chris, Thank you for the question. This is normally an indication one or more of the Door Switches is defective and may need to be replaced. They can be tested for continuity with a multi meter. We hope this helps!
What are the exterior dimensions for this microwave?
Hello Dan, thank you for contacting us. We have researched your model number and the dimensions of this unit are: 29 7/8(W) X 16 13/16(H) x 16 (D) inches. Glad to be of assistance!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Keith - For model number 40180083700
December 28, 2021
What does code - -se- - mean on display board?
Hi Keith,
Thank you for your question. The SE error code means that you either have a stuck key on the keypad or you have a failed electronic control board. Try and reset the microwave by unplugging it for a few minutes to see if this will resolve the issue. If the code reappears, you will need to check the keypad on the control panel. Press the buttons on the keypad. If the buttons light up and the microwave does not respond, remove the control panel from the microwave and disconnect the ribbon cable from the electronic control board. Sometimes a film can build up on it and you can use a pencil eraser to gently remove it. You can also test it for continuity with a multimeter to see if it is working. If the control panel tests fine, reconnect it to the microwave. If the error code reappears, you will need to replace the electronic control board. We hope this helps! If you have any questions, please let us know.
i changed this switch but now microwave is off w door shut and turns on plus rotates when the door opens???? any thoughts or suggustion?
Hard to get old part out basically separated and fell apart.
Hi Michelle, thank you for reaching out. Based on our understanding of the issue, it seems that you have not installed the switch properly, we would suggest that you may check again if the switch was installed correctly. If not, we recommend checking the door switch, part number PS11741686, for continuity and replacing it if necessary. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grease filters were missing from the over-the-stove microwave
67 of 133 peoplefound this instruction helpful.
Lori from Salt Lake City, UT
Really Easy
Less than 15 mins
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Was this helpful?
Thank you for voting!
Microwave door did not close
46 of 70 peoplefound this instruction helpful.
Rozsa from MADISON, NJ
Easy
30 - 60 mins
Initially I called a Samsung recommended appliance repair outfit to fix the latch. The technician informed me that he does not fix latches. I need to buy a full new door for the microwave for $215 plus he charges $165 to come to my house. I got angry and did some research and it turned out that this is a very common problem. I ordered par
... Read moret PS4229162 "door key" $6.67 then followed the instructions on a youtube video by zimsjeep "Repair a Broken Microwave Door Latch" to install. At first I struggled a bit hooking up the spring to the frame, but then I used a slim plier to hold the spring (instead of my fingers) and that did the trick.
Read less
Was this helpful?
Thank you for voting!
Not the original type bulb
31 of 40 peoplefound this instruction helpful.
John from Orlando, FL
Really Easy
Less than 15 mins
Screw drivers
The repair was very easy, however the bulb was not the same as the original one. The original bulb had a bright setting and a low setting, but the replacement bulb was only the low setting bulb. There was no bright and dim operation. The switch on the microwave had the duel settings.
My Orders
